BZB Gear BG-Air4Kast User manual

BG-Air4Kast
4K60 UHD HDMI 2.0 Wireless Extender Kit up to 164ft (50m)
User Manual

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 2

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
TABLE OF CONTENTS
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Package Contents 5
Specifications 6
Panel Descriptions 7
Connection Diagram 9
Connection Instructions 9
SSID Pairing Instructions 10
Troubleshooting 10
Tech Support 11
Warranty 11
Mission Statement 12
Copyright 12
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 3

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 4

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Introduction
The BG-Air4Kast is an advanced 4K@60Hz HDMI wireless extender solution
consisting of a transmitter and a receiver. It leverages ipcolor STREAM technology
for high-definition and low-latency video transmission. Operating on the 5G wireless
frequency band, it delivers stability, anti-interference capabilities, and increased
performance. The BG-Air4Kast supports wireless transmission up to 164ft (50m),
offering a solution for wirelessly transmitting video in applications such as video
conferences, home entertainment, and multimedia education.
Note: Transmission distances may vary as interference from solid structures and
other wireless signals may affect performance.
Features
●Ipcolor STREAM technology allows for high definition and low-latency transmission.
●Up to 3840x2160@60Hz resolution, backward compatible.
●4K Wireless transmission up to 164ft (50m) / 1080p60 230ft (70m) line of sight.
●HDMI loop out on transmitter for local monitoring.
●SSID pairing and channel switching to avoid interference in case multiple sets of
BG-Air4Kast are in the same area.
●IR passback (Receiver to Transmitter) to control source devices.
●5G wireless for strong anti-interference.
●Firmware upgradeable via Micro USB port.
Package Contents
●1 x BG-Air4Kast TX
●1 x BG-Air4Kast RX
●4 x Antenna
●1 x IR Blaster Extension cable
●1 x User Manual
●4 x Mounting Ears
●2 x 5V2A Power Adapters
●1 x IR Receiver Extension Cable
●12 x Screws
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 5

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Specifications
Technical Specifications
Power Supply
DC 5V/2A (TX ≤ 6W, RX ≤ 4W)
HDMI Version
HDMI 2.0
HDCP Version
HDCP 1.4 / HDCP 2.2
Maximum Transfer Rate
18Gbps
Supported Resolutions
3840x2160@24/30/50/60Hz,
1080P@50/60Hz, 720P@50/60Hz,
1920x1200, 2560x1440, 2560x1600
WiFi Frequency Bands
5.18~5.24 GHz
Transmission Distances
4K60 ~ 164ft (50m) / 1080p60 230ft (70m) line of sight
Latency
130~180ms
Connection Type
One-to-one
SSID Pairing
Supported
ESD Protection
1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Infrared Frequency
20~60kHz
Receiving Range
≤ 5m
Working Temperature
-20~60℃
Storage Temperature
-30~70℃
Humidity
0~90% RH (no condensation)
Dimensions (L x W x H)
115mm x 125mm x 20.6mm
Color
Black
Material
Iron
Weight
TX: 1Lb / RX: 1Lb
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 6

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Panel Descriptions
Transmitter (TX)
1.
Power Indicator
The LED will illuminate blue when the device is powered on.
2.
WiFi Indicator
Slow Flash: Waiting for connection
Solid: Connection established
Rapid Flash: SSID Pairing Mode
3.
Signal Indicator
Off: No HDMI signal detected
Solid: HDMI signal is transmitting
Rapid Flash: Restore Factory Settings in progress
4.
Channel Switch Button
Press to switch broadcasting channels
Press and hold for 5s for SSID Pairing mode
Press and hold for 10s to restore factory settings
5.
Antenna Connectors
Connect the included antennas
6.
Micro USB Port
Used for firmware upgrades
7.
HDMI Input
Connect to a source device using an HDMI cable
8.
HDMI Output
Connect to a display using an HDMI cable
9.
IR Out
Connect the included IR Blaster extension cable
10.
Power Input
Connect the included 5V/2A power supply
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 7

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Receiver (RX)
1.
Power Indicator
The LED will illuminate blue when the device is powered on.
2.
WiFi Indicator
Slow Flash: Waiting for connection
Solid: Connection established
Rapid Flash: SSID Pairing Mode
3.
Signal Indicator
Off: No HDMI signal detected
Solid: HDMI signal is transmitting
Rapid Flash: Restore Factory Settings in progress
4.
Channel Switch Button
Press to switch broadcasting channels
Press and hold for 5s for SSID Pairing mode
Press and hold for 10s to restore factory settings
5.
Antenna Connectors
Connect the included antennas
6.
Micro USB Port
Used for firmware upgrades
7.
HDMI Out
Connect to a display using an HDMI cable
8.
IR In
Connect the included IR Receiver extension cable
9.
Power Input
Connect the included 5V/2A power supply
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 8

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Connection Diagram
Connection Instructions
1. Connect the source device to the HDMI IN port of the transmitter with an HDMI
cable, and connect the HDMI OUT port of the receiver to the display device with
another HDMI cable.
2. If using the IR passback function, connect the IR blaster extension cable into the IR
OUT port of the transmitter, and connect the IR receiver extension cable into the IR
IN port of the receiver.
a: The emitter of the IR blaster extension cable should be as close as
possible to the IR receiving window of the source device.
b: Point the remote control at the receiving head of the IR receiver extension
cable to operate.
3. Plug the included power supplies into the devices to turn them on.
4. If multiple sets of BG-Air4Kast are being used at the same time and in the same
area, in order to prevent interference switch each set of transmitters and receivers
to a different channel after they have been manually paired using the SSID function.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 9

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
SSID Pairing Instructions
1. Enter SSID pairing mode by holding the transmitter and receiver's channel switch
buttons for five seconds. Both WiFi connection indicators will rapidly flash yellow.
2. When the SSID pairing is successful, the WiFi indicators on the transmitter and
receiver will change from quick flashing to a slow flashing or steady on.
Channel Number
Frequency
Channel 1
5.180 GHz
Channel 2
5.200 GHz
Channel 3
5.220 GHz
Channel 4
5.240 GHz
Troubleshooting
1. Why are the receiver and transmitter not connected and showing “Search
ipcolor Tx” on the display?
a. Move the Transmitter and Receiver closer.
b. Power cycle the transmitter and receiver.
c. Re-pair the transmitter and receiver.
2. Why is the WiFi indicator solid but the display is showing “Please check the
TX input signal”?
a. Ensure the TX has an HDMI input and that the resolution is within the
specified range
b. Try conning the signal source directly to the display device or change
the signal source and HDMI cables and then try again.
3. Why is the display stuttering or the image is unstable?
a. Place the transmitter and receiver closer and minimize the number of
obstructions between the transmitter and receiver.
b. Switch to a different channel to avoid interference from other wireless
signals and devices.
c. Power cycle the transmitter and receiver.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 10

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Tech Support
Have technical questions? We may have answered them already!
Please visit BZBGEAR’s support page (bzbgear.com/support) for helpful information and
tips regarding our products. Here you will find our Knowledge Base
(bzbgear.com/knowledge-base) with detailed tutorials, quick start guides, and step-by-step
troubleshooting instructions. Or explore our YouTube channel, BZB TV
(youtube.com/c/BZBTVchannel), for help setting up, configuring, and other helpful how-to
videos about our gear.
Need more in-depth support? Connect with one of our technical specialists directly:
Phone
1.888.499.9906
Email
[e-mail]
Live Chat
bzbgear.com
Warranty
BZBGEAR Pro AV products and cameras come with a three-year warranty. An extended
two-year warranty is available for our cameras upon registration for a total of five years.
For complete warranty information, please visit bzbgear.com/warranty.
For questions, please call 1.888.499.9906 or email [e-mail].
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 11

BZBGEAR BG-EXH-70C2 PRODUCT MANUAL
Mission Statement
BZBGEAR is a breakthrough manufacturer of high-quality, innovative audiovisual equipment
ranging from AVoIP, professional broadcasting, conferencing, home theater, to live
streaming solutions. We pride ourselves on unparalleled customer support and services.
Our team offers system design consultation, and highly reviewed technical support for all
the products in our catalog. BZBGEAR delivers quality products designed with users in
mind.
Copyright
All the contents in this manual and its copyright are owned by BZBGEAR. No one is allowed
to imitate, copy, or translate this manual without BZBGEAR’s permission. This manual
contains no guarantee, standpoint expression or other implies in any form. Product
specification and information in this manual is for reference only and subject to change
without notice.
All rights reserved. No reproducing is allowed without acknowledgement.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 12