C-Hopetree Bookshelf 3 Tier Slim User manual

PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
Bookshelf 3 Tier - Slim
BEFORE YOU START
• Check you have all the listed parts before you start assembling.
• In the event of missing or damaged parts, contact our customer support team.
• We suggest assembling on a soft surface such as a drop sheet or rug to avoid scratching.
• Assembly will be made easier if two people work together.
PARTS LIST
Item Picture Qty Description
A
B
C
E
D
2Side Frame
Rear Horizontal Brace
Laminate Shelf E
2
1Laminate Shelf C
Laminate Shelf D
1
1
1CHTFBOOK3WSv2019
IMPORTANT INFORMATION
• Never use power tools to assemble this product.
• Clean only with a soft damp cloth, do not use abrasive cleaning products.
• Do not place hot items directly on any laminate surfaces.
• Take care when placing objects on the shelves or tabletops as the surface can be scratched.
• Maximum safe individual shelf load 15lbs/7kgs.
• This product contains small parts and sharp points, keep away from children and pets until assembly is
complete.
• Do not sit or stand on the product under any circumstances.
• Serious or fatal crushing injuries can occur from furniture tip-over accidents. To prevent this product from
tipping over it should be permanently fixed to a wall. Fixing devices for the wall are NOT included with this
product as different wall materials require different fixing devices. You should use a fixing device suitable
for the walls in your home. For advice on suitable fixing devices contact your local specialized hardware or
DIY shop.
• When using this product basic common-sense safety precautions should be followed to reduce the risk of
personal injury and/or damage to the product.
SAFETY WARNING

F
G
Flat Head Hex Bolt - M6*25mm
4
4
Flat Washer - M6
1
Hex Wrench - M6
M6*25
4
M6
M6
Plastic Hex Bolt Head Cover - M6
H
I
1
Hex Wrench - M5
J
12 Firmit Connecting Screw - M5*40mm
K
M5*40
M6
M5
Tighten all the bolts using the correct size hex
wrench supplied. Take care not to over tighten the
bolts as damage may occur. Cover M6 bolt heads
with plastic bolt head covers (H) if desired.
Step 3
ASSEMBLY INSTRUCTIONS
Step 1
Take the two side frames and fix the two rear
horizontal braces as shown using 25mm M6 bolts
and M6 washers. Finger tighten only at this stage. Take the laminate shelf (C) and align the holes in the
shelf with the holes in the frame. Fix using 40mm M5
firmit screws as shown. Finger tighten only at this
stage. Repeat this step for the remaining two
shelves in order D and E.
Step 2 (At this stage a second pair ofhands
will be very helpful.)
B
B
FG
A
A
C
D
E
I
CUSTOMER SUPPORT
For all service related inquiries including missing or damaged parts and assembly issues please email
[email protected] directly. We promise to respond to your email within 24 hours, and we
guarantee that we will fix the problem to your complete satisfaction.
Your complete satisfaction matters to us, so if our product hasn’t met or exceeded your expectations, or if
you are having any difficulty with assembly, missing or damaged parts, please email our customer support
team directly, let us know the full details of the issue (attaching clear pictures to your email will always help
us to better understand exactly what the problem is). We do ask that you reach out to our customer support
team directly before leaving any negative review or feedback on Amazon.
2CHTFBOOK3WSv2019