CAB CC200-SQ User manual
Assembly Instructions
Scanner
CC200-SQ
MADE IN GERMANY
2 2
Assembly Instructions
Edition: 01/2020 - Part No.: 9003507
Copyright
This documentation as well as translation hereof are property of cab Produkttechnik
GmbH & Co. KG.
The replication, conversion, duplication or divulgement of the whole manual or parts
of it for other intentions than its original intended purpose demand the previous
written authorization by cab.
Editor
Regarding questions or comments please contact cab Produkttechnik GmbH & Co KG.
Topicality
Due to the constant further development of our products discrepancies between
documentation and product can occur.
Please check www.cab.de for the latest update.
Terms and conditions
Deliveries and performances are effected under the General conditions of sale of cab.
Germany
cab Produkttechnik
GmbH & Co KG
Karlsruhe
Tel. +49 721 6626 0
www.cab.de
USA
cab Technology, Inc.
Chelmsford, MA
Tel. +1 978 250 8321
www.cab.de/us
Taiwan
cab Technology Co., Ltd.
Taipei
Tel. +886 (02) 8227 3966
www.cab.de/tw
China
cab (Shanghai) Trading Co., Ltd.
Guangzhou
Tel. +86 (020) 2831 7358
www.cab.de/cn
France
cab Technologies S.à.r.l.
Niedermodern
Tel. +33 388 722501
www.cab.de/fr
Mexico
cab Technology, Inc.
Juárez
Tel. +52 656 682 4301
www.cab.de/es
China
cab (Shanghai) Trading Co., Ltd.
Shanghai
Tel. +86 (021) 6236 3161
www.cab.de/cn
South Africa
cab Technology (Pty) Ltd.
Randburg
Tel. +27 11 886 3580
www.cab.de/za
3
1 Introduction....................................................................................4
1.1 Instructions ......................................................................................4
1.2 Intended Use ...................................................................................5
1.3 Safety Instructions...........................................................................6
1.4 Environment.....................................................................................6
1.5 Technical Data.................................................................................7
2 Installation......................................................................................9
2.1 Unpacking........................................................................................9
2.2 Mounting the Scanner....................................................................10
2.3 Adjusting the Scanner....................................................................11
3 Conguration ...............................................................................13
3.1 Printerconguration.......................................................................13
3.2 Softwareconguration ..................................................................14
4 Operation......................................................................................18
5 Reference to the EU Declaration of Conformity .......................19
Table of Contents
4 4
1 Introduction
1.1 Instructions
Important information and instructions in this documentation are designated
as follows:
Danger!
Draws attention to an exceptionally great, imminent danger to your
health or life due to hazardous voltages.
!
Danger!
Draws attention to a danger with high risk which, if not avoided,
may result in death or serious injury.
!
Warning!
Draws attention to a danger with medium risk which, if not avoided,
may result in death or serious injury.
!
Caution!
Draws attention to a danger with low risk which, if not avoided, may
result in minor or moderate injury.
!
Attention!
Draws attention to potential risks of property damage or loss of
quality.
i
Note!
Advices to make work routine easier or on important steps to be
carried out.
Environment!
Gives you tips on protecting the environment.
Handling instruction.
Reference to section, position, illustration number or document.
Option(accessories,peripheralequipment,specialttings).
Time Information in the display.
5
1 Introduction
1.2 Intended Use
• The device is intended exclusively as a peripheral device for the cab
printers of the SQUIX series for checking of printed linear barcodes and
2D codes. For that purpose, it is possible to check only one barcode
per label. Any other use or use going beyond this shall be regarded as
improper use. The manufacturer/supplier shall not be liable for damage
resulting from unauthorized use; the user shall bear the risk alone.
!
Attention!
Tooperatethescannerthermwareversion5.29orhigheris
needed!
• The device is manufactured in accordance with the current technological
status and the recognized safety rules.
However, danger to the life and limb of the user or third parties and/or
damage to the device and other tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in the operating manual.
• Usage for the intended purpose also includes complying with the operating
manual, including the manufacturer's maintenance recommendations and
specications.
i
Note!
All documentation can also currently be found in the Internet.
!
Warning!
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
6 6
1 Introduction
1.3 Safety Instructions
• Warning stickers must not be removed, as then you and other people
cannot be aware of dangers and may be injured.
• The device may only be used in a dry environment, do not expose it to
moisture (sprays of water, mists, etc.).
• Do not use the device in an explosive atmosphere.
• Do not use the device close to high-voltage power lines.
• Perform only those actions described in this operating manual.
Work going beyond this may only be performed by trained personnel or
service technicians.
• Unauthorized interference with electronic modules or their software can
cause malfunctions.
• Otherunauthorizedworkonormodicationstothedevicecanalso
endanger operational safety.
• Alwayshaveserviceworkdoneinaqualiedworkshop,wherethe
personnel have the technical knowledge and tools required to do the
necessary work.
1.4 Environment
Obsolete devices contain valuable recyclable materials that should be sent
for recycling.
Send to suitable collection points, separately from residual waste.
The modular construction of the device enables it to be easily
disassembled into its component parts.
Send the parts for recycling.
Take the electronic circuit boards to public waste disposal centers or to
the distributor.
7
1.5 Technical Data
CC200-SQ
Reading distance 45 - 145 mm
Reading angle -15° to +15°
Codes per label 1
Check functions GOODBAD Checking the readability
VERIFY Checking the readability and comparing the
result with the data received
Table 1 Technical data
Code Type Programming Code size
cablabel
S3 JScript Min Max
Width Height Width Height
Aztec 2D G V G V 10 10 80 80
Codabar Linear G S G S 20 3 150 80
Codablock F 2D G - G - 10 10 80 80
Code 128
A, B, C Linear G V G V 20 3 150 80
Code 39 Linear G V G V 20 3 150 80
Code 39
Full ASCII Linear G V G V 20 3 150 80
Code 93 Linear G V G V 20 3 150 80
Data Matrix 2D G V G V 5 5 80 80
EAN / GS1
Datamatrix 2D G - G - 5 5 80 80
EAN / UCC /
GS1 128 Linear G - G - 20 3 150 80
EAN / UPC
Appendix 2 Linear G - G - 20 3 150 80
EAN / UPC
Appendix 5 Linear G - G - 20 3 150 80
EAN 13 Linear G V G V 30 3 150 80
EAN 18 /
SSCC 18 Linear G - G - 30 3 150 80
EAN 8 Linear G V G V 20 3 150 80
GS1 Data Bar Stacked G - G - 20 10 150 80
HIBC Linear G - G - 20 3 150 80
Ident and
Leacode Dpost
AG
Linear G - G - 20 3 150 80
1 Introduction
8 8
1 Introduction
Code Type Programming Code size
cablabel
S3 JScript Min Max
Width Height Width Height
Interleaved 2/5 Linear G V G V 20 3 150 80
ITF 14 Linear G - G - 20 3 150 80
JAN 13 Linear G V G V 20 3 150 80
JAN 8 Linear G V G V 20 3 150 80
Micro PDF 417 Stacked S S S S 20 10 150 80
Micro QR-Code 2D G V G V 15 15 80 80
MSI Plessey Linear S S S S - - 150 80
PDF 417 Stacked G V G V 20 10 150 80
Postnet Linear S S S S - - 150 80
PZN Linear G - G - 20 3 150 80
QR-Code 2D G V G V 15 15 80 80
RSS 14 Linear G - G - 20 3 150 80
UPC A Linear G V G V 20 3 150 80
UPC E Linear G V G V 20 3 150 80
UPC E0 Linear G - G - 20 3 150 80
UPS Maxicode 2D G - G - 15 15 80 80
DotCode 2D Not implemented
FIM Linear Not implemented
Plessey Linear Not implemented
G ... Goodbad
V ... Verify
S...Speciccongurationrequested
Table 2 Functionality depending on the code parameters
9
2 Installation
2.1 Unpacking
Check stacker for damage which may have occurred during transport.
Check delivery for completeness.
Contents of delivery:
• Scanner CC200-SQ with support and USB cable
• Assembly instruction
i
Note!
Please keep the original packaging in case the device must be
returned.
!
Attention!
The device and printing materials will be damaged by moisture and
wetness.
Set up label printer with scanner only in dry locations protected
from splash water.
10 10
2 Installation
2.2 Mounting the Scanner
!
Attention!
Disconnect the printer from the electrical outlet before mounting
the scanner.
2
13
Figure 1 Mounting the scanner
1. Push the retainer (1) of the scanner to the cutout of the printer base plate
(3).
2. Insert and tighten screw (2).
3. Insert the USB cable of the scanner into an USB port of the printer.
11
2.3 Adjusting the Scanner
2
4
1
5
3
Figure 2 Adjusting distance and angle
In order to adapt the scanner to the code to be checked, the scanner may be
adjusted:
Adjusting the reading distance
• Adaptation to size and resolution of the code
Loosen screw (5).
Move the upper part of the retainer (4) with scanner.
Tighten screw (5).
2 Installation
12 12
2 Installation
Adjusting the reading angle and inclination
• Adaptation to the position of small codes on the label
Loosen 2 screws (2) to adjust the reading angle and screw (3) to adjust
the inclination.
Turn the scanner (1).
Tighten 2 screws (2) and screw (3).
i
Note!
The moment of checking during the label feed can be set in the
software. Programming Manual.
13
3 Conguration
3.1 Printerconguration
When the CC200-SQ is connected to the printer, a menu entry will appear in
theprinter'scongurationmenuwhereyoucansetupthedevice.
Figure 3 Verifying menu
Start the menu.
Select Setup > Verifying.
Parameter Meaning Default
Error handling Let you choose how a barcode read error will be
handled by the printer.
Error dialog: the printer stops printing and an error
message is displayed.
Void label: the printer makes a backfeed and the label
is void.
Error dialog & Void label: the printer stops printing, an
error message is displayed and
the printer makes a
backfeed to void the label.
Error
dialog
Code checker Live image: shows the image seen by the scanner at
the printer's display.
Trigger mode: activates the trigger on the scanner.
Useful to determine the right reading angle of the
scanner.
Monitor mode: when a print job is running, displays
the value read by the scanner
14 14
3 Conguration
3.2 Softwareconguration
3.2.1 Code checking with JScript
i
Note!
For more details on JScript Programming manual
Commands list
+VERIFYn
Optional parameter for printer barcodes.
This parameter allows the printer to verify that the printed data are identical to
the data sent.
"n" read offset in Y-position seen from the top of the barcode.
+GOODBADn
Optional parameter for printer barcodes.
This parameter allows the printer to verify the barcode readability, without
verifying the data content.
"n" read offset in Y-position seen from the top of the barcode.
,GOODBADn
Optional parameter for graphic barcodes.
This parameter allows the printer to verify the barcode readability, without
verifying the data content.
Mainly used with windows drivers.
"n" read offset in Y-position seen from the top of the barcode.
15
3 Conguration
Examples
;+VERIFY
mm
zO
J
O R
H 75,0,T
D 0,0
S l1;0,0,30,30,100,100,1
B 8,10,0,CODE39+VERIFY0,15,.5,4;1234567
A 1
;+GOODBAD
mm
zO
J
O R
H 75,0,T
D 0,0
S l1;0,0,30,30,100,100,1
B 8,10,0,CODE39+GOODBAD0,15,.5,4;1234567
A 1
;,GOODBAD
mm
zO
J
O R
H 75,0,T
D 0,0
S l1;0,0,30,30,100,100,1
I 10,10,0,1,1,GOODBAD0;PICT1
A 1
17
1
2
3
Figure 5 Barcode properties
Clickon"Verier"(1).
Activate parameter by checking "Enabled" (2).
Select "Readability" or "Data content" (3).
Change the read offset and read timeout if necessary.
i
Note!
Forprinterbarcodesbothtypesofvericationareavailable.
For graphic barcodes only the option "Readability" can be used.
3 Conguration
18 18
4 Operation
Insert transfer ribbon and labels Operator's Manual of the printer.
Install the power and computer connections.
Switch on the printer.
For operation in peel-off mode press to start the synchronization.
Remove the blank labels peeled-off during synchronization.
Send a print job.
Therstlabelwillbeprinted.Whenthecodetobecheckedreachesthe
scan area, the scanner will be triggered.
• If the check result is positive, the next label will be printed.
In peel-off mode the label must be removed from the peel position.
• If the result is negative the error message Scan read error and a picture of
the area read appears.
After removing the faulty label the print can be repeated by pressing Repeat
or canceled by pressing Cancel.
Figure 6 Barcode read error
19
5 Reference to the EU Declaration of Conformity
The Scanner CC200-SQ complies with the relevant fundamental regulations
of the EU Rules for Safety and Health:
• Directive 2014/30/EU relating to electromagnetic compatibility
• Directive 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
EU Declaration of Conformity
https://www.cab.de/media/pushle.cfm?le=3648
Table of contents
