mini PhotoScanner
User Manual mini PhotoScanner
Notes
•Keeping the original flat and level when feeding prevents
possible jamming
•Keep the original free from finger prints, oil, or dust for optimum
scanned image quality
•Remove photos from the sleeve after scanning to prevent the sleeve
from sticking to the photo
•Keep the sleeves in a safe place when not in use to prevent them
from accumulating dust
3. Place the photo/document on the left edge of the feed slot and
adjust the guide lever so that it aligns to the right hand side of the
photo/document
4. Gently push the photo/document into the feeding slot and let go
when it begins to feed into the slot
5. When the scan has completed, a folder will be created on the SD card
or USB memory stick called ‘Photo1’. This folder can hold 9999 files.
A ‘Photo2’ folder will be created for the next 9999 scans.
Each scanned image is given a file name with the prefix ‘scan’ followed
by a 4 digital sequential number in the order the images are stored.
For example Scan0001, Scan0002, etc.
6. When you have finished scanning, press and hold the power button
for 2 seconds to turn off the mini PhotoScanner. You can now safely
disconnect the power and remove the SD card or USB memory stick
from the scanner.
pg6
