Cable-Tronix CT-400 User manual

INSTALLATION MANUAL
CT-4001-In 4-Out Audio Video Distribution
Amplifier
PACKAGE CONTENTS
This package contains:
One CT-400 Audio Video Distribution Amplifier
One 15VDC Power Adaptor
One CT-400 Installation Manual
PRODUCT DESCRIPTION
The CT-400 is a 4-port composite audio/video amplifier is designed to distribute audio/video
signals up to 4 devices while maintaining the original signal strength after distribution. The unit
supports 480i resolution.
SPECIFICATIONS
CT-400
1-In 4-Out Distribution Amplifier Specifications (Typical)
Video

1. Video Impedance 75 ohm
2. Video Bandwidth >10MHz
3. Video Gain 2V unterminated 1V
4. Video Insertion Loss 50Hz to 10MHz <40dB
5. In to Out Isolation 50Hz to 10MHz 32dB port to port
6. Out to In Isolation 50Hz to 10MHz 60dB
7. Return Loss 50Hz to 10MHz 60dB
8. Audio Response >100kHz
Audio
9. Audio Input Impedance 22K ohm
10. Audio Output Impedance 1K ohm
11. Gain Unity
12. THD 0.05% @1V input level
13. Frequency Response 20Hz to 100kHz
14. Channel Separation >75dB@1kHz
15. In to Out Isolation 60dB
16. Out to In Isolation 60dB
17. Signal to Noise 100dB@2V (out)
18. A/V Input/Output Jacks RCA type phone jacks
General
19. Power 15V DC@400mA with 2.5mm power jack
20. Dimensions INSTALLATION

1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested. Ensure that all accessories are removed
from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or Cabletronix at 1-610-429-1511 for
assistance.
3. PRODUCT DIAGRAM
INSERT IMAGE and CONNECTIONS HERE
4. HARDWARE CONNECTIONS
a. Connect the signal source’s composite video output to the distribution amplifier’s
composite video input.
b. Connect the signal source’s audio L/R output to the distribution amplifier’s audio
L/R input.
c. Connect your TV or monitor’s composite input to the distribution amplifier’s
composite video OUTPUT 1, OUTPUT 2, OUTPUT 3, or OUTPUT 4.
d. Connect your TV or monitor’s audio L/R input to the distribution amplifier’s audio
L/R output.

Troubleshooting assistance can be found on-line at www.cabletronix.com in addition to
support from Cabletronix sales engineers at 1-610-429-1511.