Cablematic USB 3.0 DISPLAY ADAPTER User manual

USB 3.0 D ISPLAY A DAPTER
USER MANUAL

C ONTENTS
............................................................................................... 3 INTRODUCTION
F EATURES .................................................................................................. 3
S YSTEM R EQUIREMENTS ........................................................................... 3
N OTES ........................................................................................................ 4
P ACKAGE C ONTENTS ................................................................................ 4
S UPPORTED C OMMON D ISPLAY R ESOLUTION ......................................... 4
T ECHNICAL S PECIFICATIONS .................................................................... 5
....................................................................... 5
QUICK INSTALLATION GUIDE
..................................................... 7 INSTALLATION ON WINDOWS 10/8.1/ 8/ 7
D EVICE D RIVER I NSTALLATION ............................................................... 7
V ERIFYING D EVICE D RIVER I NSTALLATION (W INDOWS 8.1) ............... 10
D EVICE D RIVER U N - INSTALLATION ....................................................... 12
................................................................ 13
INSTALLATION ON WINDOWS XP
D EVICE D RIVER I NSTALLATION ............................................................. 13
V ERIFYING D EVICE D RIVER I NSTALLATION (W INDOWS XP) ............... 17
D EVICE D RIVER U N - INSTALLATION ....................................................... 18
............................................................................. 19
FUNCTION DESCRIPTION
A CCESS USB D ISPLAY A DAPTER U TILITY (W INDOWS 7/ 8/ 8.1/10)..... 19
USB Display (Trigger) Utility ....................................................... 19
.............................................................................................................. 23
Q&A
............................................................................ 24 TROUBLESHOOTING TIPS
Known Issues .......................................................................................... 24
General Recommendation ..................................................................... 24
Media Playback ...................................................................................... 24
Others ...................................................................................................... 25
R EGULATORY C OMPLIANCE ........................................................................ 26

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
3
INTRODUCTION
Thank you for purchased the USB 3.0 DISPLAY ADAPTER. By 10 times faster than USB
2.0, the USB 3.0 DISPLAY ADAPTER provides a unique solution to add an extra display
for your computer just plug and play. It works as external video card which allows
adding an additional display instantly without hassle of open the computer chassis to
install the internal graphics card. And, this connected display can act as mirrored or
extended desktop of the main display on your computer.
You can experience 1080P video playback through HDMI/DVI/VGA interface and
SuperSpeed USB 3.0 for both work and entertainment.
F
EATURES
 USB 3.0 / USB 2.0 specification compliant
 Supports display resolution up to 2048 x 1152 @ 32bits
 Supports 1080P video playback
 Plug-and-Play USB connectivity after software installed
 Support Multi-display extension of one computer system
 USB bus-powered
 Friendly software utility targeted to ease your daily USB display setting
S YSTEM R EQUIREMENTS
 Available USB 3.0 / USB 2.0 port
 1~2 USB Displays (office application):
 CPU: i3 Dual core 2.8GHz
 RAM: 2GB memory or higher
 3~4 Displays (office application):
 CPU: i5 Quad Core 2.8GHz
 RAM: 4GB memory or higher
 5~6 Displays (office application):
 CPU: i7 Quad Core 3.0GHz
 RAM: 8GB memory or higher
 Full HD Video one display
 i5 Processor recommended
 CPU: Quad Core 3.0GHz or higher
 RAM: 4GB memory or higher
 Windows 8.1/ Windows 8/ Windows 7 & Windows XP (32 or 64 bit)
 Mac OS: Snow Leopard (10.6) / Lion (10.7)/ Mountain Lion (10.8)/ Mavericks
(10.9)/ Yosemite (10.10) / EL Capitan (10.11)
(Recommended Windows XP & Mac USB 2.0 for office application only)

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
4
N OTES
Driver update and installation are available from Windows update via an active
network connection.

Do not recommend to connect USB 3.0 D ISPLAY A DAPTER via the external USB
Hub.

System reboot is required for the driver installation.

W indows XP user: “Windows Media Player” is the recommended video playback.
P ACKAGE C ONTENTS
 USB 3.0 D ISPLAY A DAPTER * 1
 Driver / Manual CD * 1
 Quick Installation Guide * 1
S
UPPORTED C OMMON D ISPLAY R ESOLUTION
Aspect
Ratio Resolution Color Depth Aspect Ratio Resolution Color Depth
Wide Screen Display Standard Display
16:9 2048 x 1152 16,32 bits 4:3 1600 x 1200 16,32 bits
16:10 1920 x 1200 16,32 bits 4:3 1400 x 1050 16,32 bits
16:9 1920 x 1080 16,32 bits 5:4 1280 x 1024 16,32 bits
16:10 1680 x 1050 16,32 bits 4:3 1280 x 960 16,32 bits
16:9 1600 x 900 16,32 bits 4:3 1152 x 864 16,32 bits
16:10 1440 x 900 16,32 bits 4:3 1024 x768 16,32 bits
16:9 1366 x 768 16,32 bits 4:3 800 x 600 16,32 bits
16:9 1360 x 768 16,32 bits
16:10 1280 x 800 16,32 bits
15:9 1280 x 768 16,32 bits
16:9 1280 x 720 16,32 bits
Monitor refresh frequency: 60 Hz

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
5
T ECHNICAL S PECIFICATIONS
Operating System
Windows 10/ 8.1 / 8 / 7 / XP (32bit &64bit)
Mac Snow Leopard (10.6) / Lion (10.7) / Mountain Lion
(10.8) / Mavericks (10.9) / Yosemite (10.10) / EI Capitan
(10.11)
Host Interface USB 3.0 A type connector
Video Output Connector
DB- 15pin (female) – Model: USB 3.0 - VGA
DVI-I (female) – Model: USB 3.0 - DVI
HDMI (female) – Model: USB 3.0 - HDMI
Case Material ABS
Power Source Bus Powered
Regulatory Compliances CE, FCC, VCCI and C-Tick
RoHS compliant
Environmental Specification
Operating Temperature: 0~50°C
Storage Temperature: -10~75°C
Humidity: <85% non-condensing
QUICK INSTALLATION GUIDE
Follow these steps to quickly install your new USB DISPLAY ADAPTER.
Step 1
Connect the display device (monitor/projector) to the VGA/DVI/HDMI connector of
USB DISPLAY ADAPTER and turn on the display device.
Step 2
※ When the Windows OS is Windows 7 or higher with an active network connection
Plug in the USB DISPLAY ADAPTER to the USB port of your computer (host PC).
It will launch the driver installation wizard automatically. Please follow the
instructions to install the device driver.
After system reboot, the extended display will be shown on the attached display
device (monitor/) projector and an icon
“USB Display (Trigger) Utility” appears
in the taskbar. The USB DISPLAY ADAPTER is ready to use now.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
6
※ When the Windows OS is Windows XP or there is no network connection
Insert the Driver/Manual CD into CD-ROM drive; the setup program should be
launched automatically. Or, double click “D:\Setup.exe (where D: is the path of
your CD-ROM drive) and follow the instructions to install the device driver.
After system reboot, please plug in the USB DISPLAY ADAPTER to the USB port
of your computer (host PC), the device driver will be configured automatically.

After the driver is configured completely, t he extended display will be shown on the
attached display device (monitor/projector) and an icon
“USB Display (Trigger)
Utility” appears in the taskbar. It is ready to use now.
Windows XP user: Please reboot the computer to make sure the USB Display
Adapters work correctly.
※ Multi-Display Setup
 Connect the display device (monitor/projector) to the VGA/DVI/HDMI connector
of USB DISPLAY ADAPTER and turn on the display device.
 Please plug in the additional USB DISPLAY ADAPTER (connected with the
display device already) to an available USB port of your computer (host PC), the
device driver will be configured automatically. After the driver is configured
completely, the USB extended display will be shown on the attached display device.
 Repeat this step for each additional USB DISPLAY ADAPTERS you want to
install.
Windows XP user
: Please reboot the computer to make sure the multiple USB
Display Adapters work correctly.
※ The screen may flash or go black during installation. It is part of the normal process.
※ This “USB Display (Trigger) Utilit y” icon won’t be appeared if the USB
DISPLAY ADAPTER does not connect to the USB port of computer (host PC).

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
7
INSTALLATION ON WINDOWS 10/8.1/ 8/ 7
D EVICE D RIVER I NSTALLATION
Installing the device driver enables your computer’s operating system to recognize the
USB 3.0 DISPLAY ADAPTER once it’s connected. Please check your operating system
and refer to the appropriate installation procedure to begin installing the device driver.
This section illustrates the simple device driver installation procedure for computer
running
Windows 8.1 operating system. Please make sure the USB 3.0 DISPLAY
ADAPTER is unplugged from your PC or Notebook before executing the setup program.
Step 1.
Insert the Driver CD into the CD-ROM drive; the setup program should be launched
automatically. If setup program does not begin automatically, click Start, Run and
double click “
D:\Setup.exe ” (where D: is the path of your CD-ROM drive).
Step 2.
Driver Installation Wizard, click “ Next ” to continue.
Step 3.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
8
License Agreement; please review it and check “ I accept the terms of the license
agreement.
” Click “ Next ” to accept the License Agreement.
Step 4.
Setup is searching for installed features.....
Step 5.
Select “ Yes, I want to restart my computer now”, and click “ Finish ” to reboot.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
9
Step 6. HARDWARE DEVICE DRIVER INSTALLATION (AFTER REBOOT)
Please connect the external display device (monitor/projector) to the VGA/DVI
connector of
USB 3.0 D ISPLAY A DAPTER and turn on this external display device.
Then plug the
USB 3.0 D ISPLAY A DAPTER into an available USB port of your PC or
Notebook. The device driver software setup will begin automatically.
After the driver is configured, you will see there an UI icon “USB Display
(Trigger) Utility
” on the taskbar. The extended display will be shown on
the attached display device. You may begin to use the USB 3.0 Display
Adapter with your display device.
Step 7. I NSTALLATION OF MULTIPLE USB 3.0 D ISPLAY A DAPTERS
Please plug in the additional USB 3.0 Display Adapter (connected with the external
display device already) to an available USB port of your computer (host PC), the
device driver will be configured automatically. After the driver is configured
completely, the USB extended display will be shown on the attached display device.
Repeat this step for each additional USB 3.0 Display Adapters you want to install.
All USB Display devices are now installed completely and ready to use.
※
The “USB Display (Trigger) Utility ” icon won’t be appeared if the USB Display
Adapter does not connect to the USB host.
※
The screen may flash or go black during installation. It is part of the normal process.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
10
V ERIFYING D EVICE D RIVER I NSTALLATION (W INDOWS 8.1)
The following procedure allows you to verify the device driver installation.
Swipe in from the right edge of the screen, and then click “Search”→enter “Device
Manager”. (Right click “Start ” at the taskbar, click “Device Manager”)
Plug-in the
USB 3.0 D ISPLAY A DAPTER , then double click “Trigger USB Graphics
Family”. Begin verification by make sure highlighted devices were added to the
system.
Single USB 3.0 Display Adapter installation on the computer
U
SB3.0TOVGA/DVI U SB3.0TOHDMI

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
11
Multiple USB 3.0 Display Adapters installation on the computer

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
12
D EVICE D RIVER U N - INSTALLATION
Step 1. Rick click “ Start ” at the taskbar, then click →”Programs and Features”.
Select
“ Trigger External Graphics Family 15.xx.xxxx.0179” .
Click “Uninstall” button.
Step 2.
Unplug the USB 3.0 D ISPLAY A DAPTER and click “OK ” to continue.
Step 3.
Select “ Yes, I want to restart my computer now ” and click “ Finish ” to reboot.
After reboot, you will complete the driver un-installation.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
13
INSTALLATION ON WINDOWS XP
D EVICE D RIVER I NSTALLATION
Installing the device driver enables your computer’s operating system to recognize the
USB
3.0 D ISPLAY A DAPTER once it’s connected. Please check your operating system
and refer to the appropriate installation procedure to begin installing the device driver.
This section illustrates the simple device driver installation procedure for computer
running
Windows XP operating system. Please make sure the USB 3.0 D ISPLAY
A DAPTER is unplugged from your PC or Notebook before executing the setup
program.
Step 1.
Insert the Driver CD into the CD-ROM drive; the setup program should be launched
automatically. If setup program does not begin automatically, click Start, Run and
double click “
D:\Setup.exe ” (where D: is the path of your CD-ROM drive).
Step 2.
Driver Installation Wizard, click “ Next ” to continue.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
14
Step 3.
License Agreement; please read it and select “ I accept the terms of the license
agreement
.” Click “ Next ” to accept the License Agreement.
Step 4.
Setup is searching for installed features…..
※
You may notice the screen flashes during the driver installation. It is part of the
normal process.
※
When the Microsoft Windows Security warning dialogue box appears, please select
“Continue Anyway” to continue with the installation. This will not affect the device driver
installation and the device usage.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
15
Step 5.
Select “ Yes, I want to restart my computer now ”, and click “ Finish ” to reboot.
Step 6. H
ARDWARE D EVICE D RIVER I NSTALLATION (A FTER REBOOT )
1. Please c onnect the external display device (monitor/projector) to the VGA/DVI
connector of USB
3.0 D ISPLAY A DAPTER and turn on this external display device.
2. Then plug the USB 3.0 D ISPLAY A DAPTER into an available USB port of your
computer. The device driver will be configured automatically.
※
When the Hardware Installation Wizard dialog appears, please select “ No, not this time ”
and click “
Next ” to continue. Click “Continue Anyway” when the Microsoft Software
warning dialogue box appears. Then, click “
Finish ” to complete the Hardware Wizard.
3. After the driver is configured, you will see there is an UI icon “USB Display Device
(Trigger family)
” on taskbar. The extended display will be shown on the attached
display device. The USB 3.0 Display Adapter is ready to use now.
※
You may notice the screen flashes during the hardware installation. It is part of the
normal process.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
16
Step 7. I NSTALLATION OF MULTIPLE USB 3.0 D ISPLAY A DAPTERS
Please plug in the additional USB 3.0 Display Adapter (connected with the external
display device already) to an available USB port of your computer (host PC), the
device driver will be configured automatically. After the driver is configured
completely, the USB extended display will be shown on the attached display device.
Repeat this step for each additional USB 3.0 Display Adapters you want to install.
To make sure the USB 3.0 Display Adapters worked correctly, please reboot the
computer.
After reboot the computer, all USB 3.0 Display devices are now installed
completely and ready to use.
※
The “USB Display Device (Trigger family) ” icon won’t be appeared if the USB
Display Adapter does not connect to the USB host.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
17
V ERIFYING D EVICE D RIVER I NSTALLATION (W INDOWS XP)
The following procedure allows you to verify the device driver installation.
Please right click “My Computer” →“Properties” →“Hardware” →“Device
Manager”.
Plug-in the USB 3.0 D ISPLAY A DAPTER , then double click “Display adapters”, and
“Trigger USB Graphic Family”. Begin verification by make sure highlighted devices
were added to the system.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
18
D EVICE D RIVER U N - INSTALLATION
Step 1. Click “Start ” → “ Control Panel ” → “ Add or Remove Programs ”
Select “ Trigger External Graphics Family 15.xx.xxxx.0179” .
Click
“ Uninstall ” button.
Step 2. Unplug the USB 3.0 D ISPLAY A DAPTER and click “ OK ” to continue.
Step 3. Select “ Yes, I want to restart my computer now ” and click “ Finish ” to reboot.
After reboot, you will complete the driver un-installation.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
19
FUNCTION DESCRIPTION
This section describes several friendly functions provided by the USB D ISPLAY
A DAPTER designed to ease your single or multiple USB display experience . A display
device described in this section means devices such as monitor and projector...
A CCESS USB D ISPLAY A DAPTER U TILITY (W INDOWS 7/ 8/ 8.1/10)
Make sure the USB Display Adapter is
attached to the PC, and will see an icon “USB
Display (Trigger) Utility ” in the taskbar.
Click this icon to access the variety of
functions associated to the USB Display
adapter.
USB Display (Trigger) Utility
- It won’t be shown on the taskbar if the USB Display Adapter does not connect to
the USB port of your PC.
D ISPLAY ID
– Smart Display Device ID Detection
USB Display Adapter supports VESA defined
DDC/EDID. The utility will show the display
device ID whenever it is attached to the USB Display
Adapter.
If there is no display device attached to the USB
Display Adapter, a “Generic” ID will be shown.
In some cases, the attached display device does not
support EDID, the ID will also defined as “Generic”.

USB 3.0 D ISPLAY A DAPTER U SER M ANUAL
20
D ISPLAY R ESOLUTION
–
Fast Access to Display Resolution Setting
The resolution list will show up when you move the cursor
over “Display Resolution”. Select and click the
resolution you want.
D
ISPLAY O RIENTATION
There are four options available:
“Landscape”, “Portrait (Flipped)”,
“Landscape (Flipped)”, and “Portrait” that
under the extended or primary display mode.
E
XTENDED D ESKTOP TO
To adjust the position of extended display to be
“Right”, “ Left”, “Top”, or “Bottom”.
.