Cables to Go 39975 User manual

DVI over UTP Extender
Model: 39975
Operation Manual

1
DVI over UTP Extender
Model: 39975
Operation Manual
Thank you for purchasing the DVI over UTP Extender. We recommend that you read this
manual thoroughly and retain for future reference.
Package Contents:
•(1) DVI Local Unit (DVI-L)
•(1) DVI Remote Unit (DVI-R)
•(2) Power Adapters
•Operation Manual
Features:
•Extend DVI signals over Cat5 cable
•Power indication light lets you know the extenders are active
•Supports PC resolution of 1600x1200 60Hz @30 meters
•Supports PC resolution of 1280x1024 60Hz @50 meters
•Easy installation
•Plug & Play

2
Connecting the Extenders
Note-If you do not have Cat5 cable already installed in-wall and you plan on installing Cat5
behind the wall, we recommend hooking up everything before you install the cable to make sure
everything will be functional in your application.
1. Turn off your PC and monitor.
2. Connect a DVI male to male cable between the PC and the “DVI In” port on the
DVI-L (DVI-Local) unit.
3. Connect a DVI male to male cable between the monitor and the “DVI Out” port on the DVI-R
(DVI-Remote) unit.
4. Use two Cat5 cablesconnecting the endsto the “Video” port and DDC on the DVI-L unit and
the other ends to the “Video” and DDC port on the DVI-R unit.
5. Use the two power adapters to connect each unit to an electrical outlet.
6. Turn on the PC and monitor.
Note: The purpose of the DDC (Data Display Channel) is to provide communication capability
between a source and a display. The channel provides configuration information to allow such
features as “Plug & Play”, and give you optimal performance from your display.
DVI-Local unit
DVI-Remote Unit
Local Unit Rear View
Remote Unit Rear View

3
Troubleshooting:
Specifications:
Inputs
Outputs
Interface
1 DVI Female (DVI Local
Unit)
2 RJ-45 Port (DVI Remote
Unit)
1 DVI Female (DVI
Remote Unit)
2 RJ-45 Port (DVI Local
Unit)
Max Resolution
1600x1200 60Hz w/30 meter Cat5 cable/
1280x1024 60Hz w/60 meter Cat5 cable
Housing Material
Metal
Power
DC 5V 1.2A
Weight
.3 lbs.
Dimensions (L x W x H)
2.64 x 2.05 x 1.50 in.
Problem
Possible Solution
No picture
1. Make sure to use Cat5e cables. Other category
cables may work, but results cannot be guaranteed
using other types.
2. Be sure that each unit is positioned correct. The
remote unit should connect to the display, and the
local unit should connect to your PC.
3. Check to see if the power indicator lights are on and
the units are plugged in.

4
Cables To Go™ One Year Warranty
At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one
year warranty on this device. If you experience problems due to workmanship or material defect
for the duration of this warranty, we will repair or replace this device. To request a Return
Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or
www.cablestogo.com.
Important Safety Information
!Do not plug the unit in any outlet that does not have enough current to allow the switch to
function. Refer to the specifications in this manual for power level of the unit.
! Liquid:
If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to
use the unit.
Do not attempt to use this product in an outdoor environment as elements such as rain, snow,
hail, etc. can damage the product.
! In case of a storm, it is recommended that you unplug this device from the outlet.
! Avoid placing this product next to objects that produce heat such as portable heaters, space
heaters, or heating ducts.
!THERE ARE NO USER SERVICEABLE PARTS
Do not attempt to open this product and expose the internal circuitry. If you feel that the
product is defective, unplug the unit and refer to the warranty information section of this
manual.
3555 Kettering Blvd.
Moraine, OH 45439
1-800-293-4970
www.cablestogo.com