Cables to Go TruLink 39962 User manual

TruLink™
2/4-Port Audio Video Splitter / Extender
User Manual
#39962
#39963

1
Introduction
The TruLink™ Video Switcher/Extender will display two or four computer’s video outputs to one
monitor or projector. Daisy-chain more than one switcher to expand the number of computers you
can connect. With the built-in video signal enhancement, you can place the monitor up to 210 feet
away while maintaining your video quality. No software is required and PC selection is easy.
Switch between computers via push buttons or use the infared remote control for PC selection from
up to 6 feet away. From use in test bench facilities, data centers and help desks, classrooms, and
multi-media centers, the TruLink Video Switcher/Extender delivers both performance and value.
Features:
•Display video output from two or four computers on a single monitor or
projector
•PC selection via push buttons or IR remote control
•IR remote control allows you to switch outputs from up to 6 feet away
•Daisy-chain switches to expand the number of computers connected
•Built-in video signal enhancement allows monitor to be placed up to 210 feet
away
•Supports video resolutions up to 2048x1536
•Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multisync monitors
•Maximum bandwidth of 450MHz
•Input connectors: 2 or 4x HD15 Male
•Output connectors: 1x HD15 Female

2
Package Contents:
•TruLink™ 2 or 4-Port UXGA Monitor Switcher/Extender
•InfaRed Remote Control
•5V/1A DC Power Adapter
•User Manual
Product Specification
Function 2-Port (Part #39962) 4-Port (Part #39963)
Type Video Selector
Cable Distance
(Selector to Monitor)
65 meters (max.)
Signal Type VGA,SVGA,XGA,Multi sync
PC selection By push button and Infrared remote control
Video Output
Connectors
1 x HDB-15 Female
Operating
Temperature
0-40 degrees(Celsius)
Storage Temperature -50-70 degrees(Celsius)
Humidity 0-80%RH,Non-condensing
Housing Metal
DC Power Adapter 5V
Max. Resolution 2048x1536
Bandwidth(-3db) 450MHz
Video Input
Connectors
2x HDB-15 Male 4x HDB-15 Male

3
Application
ApplicationApplication
Application
2-port Video Selector- #39962
4-port video Selector- #39963

4
Connecting the
Connecting the Connecting the
Connecting the D
DD
Device
eviceevice
evice
1. Use an HD15 male to male cable to connect your monitor or
projector to the HD15 female port with the picture of a monitor
under it.
2. Use HD15 male to female cables to connect your computers to
the HD15 male ports labeled 1-2 or 1-4.
3. Connect the power adapter to the port labeled DC 5V and
connect the adapter to a power outlet.
4. Use the push buttons on the front of the device or the IR
remote control to switch the video signal sent to your monitor
or projector.
5. The LED above the push button on the front of the device will
light green to indicate which computer is selected.
6. Turn the on/off the device and your monitor by switching on/off
the red toggle switch on the front of the device.
www.cablestogo.com
1501 Webster Street
Dayton, Ohio 45404