Cabletron Systems 6C105 Operation and maintenance manual

IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the FE-100 uplink module to
experience problems when used in the SmartSwitch 2000 and 6000
family of products.
Known issues are specific to the FE-100 units produced after 2/15/98 .
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the SmartSwitch 2000 and 6000 products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the FE-100 uplink module to
experience problems when used in the SmartSwitch 2000 and 6000
family of products.
Known issues are specific to the FE-100 units produced after 2/15/98 .
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the SmartSwitch 2000 and 6000 products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the FE-100 uplink module to
experience problems when used in the SmartSwitch 2000 and 6000
family of products.
Known issues are specific to the FE-100 units produced after 2/15/98 .
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the SmartSwitch 2000 and 6000 products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the FE-100 uplink module to
experience problems when used in the SmartSwitch 2000 and 6000
family of products.
Known issues are specific to the FE-100 units produced after 2/15/98 .
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the SmartSwitch 2000 and 6000 products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02

To ensure full functionality of the FE-100 when used with SmartSwitch
2000 and 6000 products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
[phone].
To ensure full functionality of the FE-100 when used with SmartSwitch
2000 and 6000 products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
[phone].
To ensure full functionality of the FE-100 when used with
SmartSwitch
2000 and 6000 products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
[phone].
To ensure full functionality of the
FE-100 when used with SmartSwitch
2000 and 6000 products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
[phone].