CableWholesale 41V3-26100 User manual

User manual
4K/2K HDbitT HDMI Extender
Q：TV display “Waiting for connection” on the right corner?
A：Please check if the power supply of TX (Sender) and switcher (if used)
is connected, and make sure connecting cable is firmly.
Q：TV display “Please check the TX input signal”？
A：1) please check if there is a HDMI signal input of TX.
2) Try to connect the signal source directly to display device to see if
there is singal output from source device or change the signal source,
HDMI wire and try again.
Q: When playing 4kx2k source, screen is back without any content?
A: Make sure both TV and HDMI cable support HDMI1.4.
•FAQ
•Specification
Q：Display not fluent, not stable?
A：1) Please check the cable length between the TX to switch, the switch
to the RX and the connection between each level is within the
required range.
2) Click the"reset"button on the TX/RX front panel, reset and
reconnect.
HDMI EXTENDER
TX(Sender)
HDMI IN
DVD
Switch
CAT5/5E/6 Cable
HDMI OUT
TV HDMI EXTENDER
RX(Receiver)
2.2 Router Connection: By using network router/repeater, realize
unlimited extension.
Switch*N
2.3 One-to-many Connection: By using network router/switch，one
sender to several receivers, realize extender & splitter function.
HDMI OUT
TV
HDMI EXTENDER
TX(Sender)
HDMI IN
DVD
HDMI EXTENDER
RX(Receiver)
Switch
HDMI OUT
TV
HDMI EXTENDER
RX(Receiver)
HDMI OUT
TV
HDMI EXTENDER
RX(Receiver)
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual are just for reference,and there may be some slight
difference with the real products.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Disclaimer
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz,
4Kx2K @24/25/30Hz
Specifications
HDMI Signal Compatible with HDCP
Support resolutions
Network Cable UTP/STP Cat5/5e/6
Transmission distance Up to 120 meters transmission distance for 1080p
60Hz Full HD over single CAT6
IR signal
Working Temperature
Power Supply
Supports 20~60KHz IR devices
Items
DC5V/2A
0℃～60℃
transport protocol HDbitT
Power Consumption TX: 5W; RX: 4W
Dimensions
Weight
Color Black
96.8(W) x 94(D) x 23.7(H)mm *2PCS
TX:170g RX:167g
CAT5/5E/6 Cable
CAT5/5E/6
Cable
41V3-26100 = 1080p
41V3-27100 = 4K

• Installation Procedures
2. HDMI EXTENDER RX(Receiver)
HDMI EXTENDER
sender TX ×1pcs
HDMI EXTENDER
receiver Rx ×1pcs
User Manual ×1pcs
• Installation Requirements
1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring
equipment etc).
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. Network cables：UTP/STP Cat5e/6 network cables, which following the
standard of IEEE-568B.
Transmission length: CAT5 80m/CAT5E 100m/CAT6 120m.
DC5V/2A ×2pcs IR blaster e x tension
cable*1 p c s
IR receiver extension
cable*1pcs
IR OUT I R IN
• Panel Description
1. HDMI EXTENDER TX (Sender)
• Introduction
Reset
HDMI signal input
IR signal output to connect
with blaster extension cable
Power input（DC5V）
HDbitT signal output
4
3
2
15
6
7
8
Data transmission light
Network link light
Power Light
Reset
HDMI signal output
IR signal input to connect with
IR receiver extension cable
Power input（DC5V）
HDbitT signal input
4
3
2
15
6
7
8
Data transmission light
Network link light
Power Light
Follow the stanard of IEEE-568B:
1- Orange/white
2- Orange
3- Green/white
1. How to make a Cat5e/6 network cable
4- Blue
5- Blue/white
6- Green
7- Brown/white
8- Brown
2. Connections
HDMI IN HDMI OUT
HDMI EXTENDER
TX(Sender)
HDMI EXTENDER
RX(Receiver)
TV
2.1 Point to Point connection: Up to 120 meters transmission dista-
nce over single CAT6 (High quality cable can reach 150 meters) .
DVD
Please read below safety instructions carefully before installation and
operation:
* Please pay attention to all the warnings and hints on this device.
* Do not expose this unit to rain, moisture and liquid.
* Do not put any stuff into the device.
* Do not repair or open this device without professional people's guidance.
* Make sure good ventilation openings to avoid product overheating damage.
* Shut off power and make sure environment is safe before installation.
* Do not plug-in/out the network cables and IR cables when it is in using
to avoid cables damage.
* Use DC5V only. Make sure the specification matched if using 3rd party DC
adapters.
Thank you for purchasing this product. For optimum performance and
safety, please read the instructions carefully and keep the manual for
future reference.
• Important safety notice
HDMI HDbitT extender, takes the advantages of the latest transmission
technology - HDbitT, extends your HDMI video/audio with the resolution
of 1080p 60Hz up to 120m(394 feet) via single network cable. Supports IR
signal trans mission, to control media playback of the signal source device
at the display location.
• Package Contents
123
IR
123
CAT5/5E/6
Cable