CableWholesale 42V3-22200 User manual

HDMI Extender over Cat5e/Cat6
(HD BaseT)
User manual

Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
I. Introduction
The HDMI Extender over cat5e/cat6 is a tool for extending your HDMI signal over long
distance to a compatible display. It is designed to convert HDMI signal to standard
HDBaseT signal and transmit by Internet cable. Its also supports Transfer Bidirectional
Infrared control signal together with the HDMI signal, so you can control the Source in
the Sink side which is 100 meters outside, also you can control the Sink in the Source side
which is 100 meters outside using the HDMI Extender.
1

II. Features
One pair as a full functional module, no need for setting.
POE(Power Over Ethernet)function support, either TX or RX powered
12V@2.5A,another device will no need power form the DC jack. POE Power
Consumption less than 10W.
Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long
distances transmission.
UTP cable termination follows the standard of IEEE-568B.
Transmission distance:
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit
4K x 2K@30Hz@24bit.
HDMI V1.4 supported.
2

HDCP compliant.
Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D
1080P60Hz and 4K x 2K@30Hz@24bit
Transfer Bidirectional Infrared control signal together with the HDMI signal.
III. Package
HDMI Extender Transmitter -------------------------------------------------------- 1PC
HDMI Extender Receiver ------------------------------------------------------------ 1PC
IR Transmitter -------------------------------------------------------------------------- 2PCS
IR Receiver ----------------------------------------------------------------------------- 2PCS
12V2.5A DC Power Supply adapter ------------------------------------------------ 1PCS
Operation Manual --------------------------------------------------------------------- 1PC
3

IV. Specifications
Frequency Bandwidth 2.97Gbps
HDMI Transmitter Input/Output Ports 1x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
HDMI Receiver Input/Output Ports 1 x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
Power Supply DC 12V 2.5A
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 65(W) X 100 (D) X 25 (H)
Weight 200g x 2
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
4

Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20 ~ 90% RH (Non-condensing)
Power Consumption (Max) 20W
V. Operation controls and Functions
Transmitter
DC IN: Plug the 12V DC power supply into the unit.
5

IR OUT: Chanel 1 IR Transmitter.
IR IN: Chanel 2 IR Receiver.
HDMI IN: HDMI Input port.
HDMI Signal OUT: Standard HDBaseT signal output port
LINK LED: This red LED illuminate when the Transmitter and Receiver are connected
with
LAN cable.
Receiver
6

DC IN: Plug the 12V DC power supply into the unit.
IR IN: Chanel 1 IR Receiver.
IR OUT: Chanel 2 IR Transmitter.
HDMI OUT: HDMI Output port.
HDMI Signal IN: Standard HDBaseT signal input port
LINK LED: This red LED illuminate when the Transmitter and Receiver is connected
with
LAN cable.
7

VI. Application Example
8