Calculated Industries 9430 User manual

SCHEDULE CA L C
™
ADVANCED TIME CALCULATOR
Model 9430

INTRODUCING SCHEDULECALC
The all new ScheduleCalc™is an
advanced time and date calculator
withthe following built-in features to
simplify all your time and date related
problems.
• Entry formats include:
Hours,Minutes,Seconds
Hour:Minutes:Seconds (H:M:S)
AM/PM or Sexagesimal (24-hour)
Days, Weeks, Months, Years
Work Days and Work Weeks
• Adds, subtracts, multiplies and
divides time and date formats
• Begin, End and Duration keys for
instant time and date math results
• Stopwatch/timer with count down
and count up, split/lap and optional
buzzer
• Built-in preference key lets you
customize settings
• Paperless Tape function displays the
last 20 data entries
• 10 Memory locations (registers)
• Prorate key for quick prorated time
and date calculations

TABLE OF CONTENTS
KEY DEFINITIONS / FUNCTIONS . .1
Standard Calculator Keys . . . . . . .1
Time Function Keys . . . . . . . . . . . .2
Date Function Keys . . . . . . . . . . . .3
Duration Function Keys . . . . . . . . .4
Timer Function Keys . . . . . . . . . . .6
Memory Function Keys . . . . . . . . .7
Other Function Keys . . . . . . . . . . .8
OPERATING BASICS . . . . . . . . . . .9
Basic Math . . . . . . . . . . . . . . . . . . .9
Percent Calculations . . . . . . . . . . .9
Delta Percent . . . . . . . . . . . . . . . . .9
Memory Function . . . . . . . . . . . . .10
Storing Values into Memory 1-9 . .10
Using Cumlative Memory . . . . . .11
Preference Settings . . . . . . . . . . .11
Calendar Mode Settings . . . . . . .15
USING THE SCHEDULECALC . . .17
Hours per Day . . . . . . . . . . . . . . .17
Hours per Week . . . . . . . . . . . . . .17
Year . . . . . . . . . . . . . . . . . . . . . . .18
Time and Date Math Rules . . . . .18
Time Values . . . . . . . . . . . . . . . . .19
Date Values . . . . . . . . . . . . . . . . .21
Time and Date Conversions . . . .22
TIME AND DATE MATH . . . . . . . . .23
Simple Addition . . . . . . . . . . . . . .23
Split Time Requirements . . . . . . .23
Split Times Projected . . . . . . . . . .24
Scheduling Total Time . . . . . . . . .25

Production Fixed Lengths . . . . . .25
Production Spacing . . . . . . . . . . .26
Beginning, End and Duration . . .28
Scheduling-Multiple Steps . . . . . .29
Duration-Using +Days Function .30
Holiday Values . . . . . . . . . . . . . . .30
Prorated Values . . . . . . . . . . . . . .32
Prorating a Dollar Amount . . . . . .33
Rate Function . . . . . . . . . . . . . . . .34
Billing . . . . . . . . . . . . . . . . . . . . . .35
Scheduling-Payroll . . . . . . . . . . . .37
STOPWATCH/TIMER . . . . . . . . . . .38
Split/Lap Function . . . . . . . . . . . .39
Working with Timer Values . . . . . .39
PAPERLESS TAPE FEATURE . . . .40
Display Format . . . . . . . . . . . . . . .41
Using the Paperless Tape . . . . . .41
Clear the Paperless Tape . . . . . .39
APPENDIX . . . . . . . . . . . . . . . . . . .46
WARRANTY AND REPAIR . . . . . . .48

User’s Guide — 1
KEY DEFINITIONS / FUNCTIONS
Standard Calculator Keys
o-On/Clear
Turns power on. Pressing once clears
the display. Pressing twice clears all
temporary values.
O-Off
Turns power off, clearing all non-per-
manent registers.
r-Recall
Used to recall stored values.
s-S t o r ag e
Stores displayed values.
C-Convert
Used to convert between time formats
or to access secondary functions.
0through 9&•
Keys used to enter digits.
+ – x ÷ =
Basic arithmetic operation keys.
%-Percent Key
Four-function (+ – x ÷)percentkey.
C % -Delta Percent ( )
Calculates the percentage difference
between two numbers.

2 — ScheduleCalc™
Time Function Keys
H-Hour
Enters/converts to decimal hours or
Hour: Minute: Second (H:M:S) time
formats. Repeated presses will toggle
between formats.
m-Minute
Enters/converts to decimal minutes
or Minute: Second (M:S) time fomats.
Repeated presses will toggle between
formats.
ß-Seconds
Enters/converts to seconds.
:-Time Unit Separator
Separates Hours, Minutes, and
Seconds.
C : - 24 Hr
Converts the displayed time value to
24-hour format. For example, 3:00:00
pm is converted to 15:00:00. See
“ Ti me Va l u e s ” s e c t i o n .
A
Designates entry as AM.
p
Designates entry as PM.

User’s Guide — 3
Date Function Keys
/-Date Separator
Used as a separator for date entries.
For example, 1 / 1 5 /
1 9 9 7. Displays the year setting
when used with r. See “Date
Values” section.
s / -C h a n geYear
Used to change and store the default
year. If no year is entered as part of a
date entry, ScheduleCalc uses this
default. For example, if the default
year is 2007, entering 3/1=
displays as: THUR 3 • 0 1 • 2 0 0 7.
y-Ye a rs
Used to enter a displayed value as
years. When used with C, a
displayed value is converted to years.
Â-Months
Used to enter a value as months.
When used with C, the displayed
value is converted to months.
w-Weeks
Used to enter a week value. When
used with C, the displayed value is
converted to weeks. When used with
s, you may change the number of
work hours per week. (Enter a value
then press sw.) Used with r,
displays work hours per week.

4 — ScheduleCalc™
d-Days
Used to enter a value as days. When
used with C, the displayed value is
converted to days. When used with
s, you may change the number of
work hours per day. (Enter a value
then press sd.) Used with r,
displays work hours per day.
h-Holiday
Used to display programmed holi-
days. Use with sand Cto add
and delete holidays. See “Holiday
Values” section.
M-Mode
Used to set the Day Count method for
date math calculations. See
“Calendar Mode” section.

User’s Guide — 5
Duration Function Keys
B- Beginning Point
Used with the Eand Dkeys to
enter or calculate the starting point of
a time or date duration.
E-End Point
Used with Band Dkeys to enter
or calculate the ending point of a time
or date duration.
C 1 (+1 day) -Plus One Day
Used before the Ekey to add 24
hours to a time calculation.
C 2 (+2 day) -Plus Two Day
Used before the Ekey to add 48
hours to a time calculation.
C 3 (+3 day) -Plus Three Day
Used before the Ekey to add 72
hours to a time calculation.
D-Duration
Used with the Band Ekeys,
and the +1 day, +2 day, +3 day func-
tions to enter or calculate the duration of
tim e .
∏-Prorate
Used in combination with the B
and Ekeys to calculate a prorated
value. See “Prorated Values” section.

6 — ScheduleCalc™
C ∏ -Prorated Amount
Used to enter the dollar value being
prorated. Used in combination with
the Band Eand ∏keys. See
“Prorated Values” section.
C • -Rate
Multiplies a numerical or time value
by the rate or temporarily overrides a
stored rate.
N o t e : When entering a math string, C •
pressed after a unitless value will override
the previous rate. For example, if you enter
2 • 5 H x 1 0 C •,
ScheduleCalc uses 10 as rate instead of
stored value.
s•-Store Rate
Permanently stores a unitless value
as a rate. You may clear the value by
performing a “Clear All” (C x ) or
replace it with another value.
Timer Function Keys
T-Stopwatch / Timer
Used to access the Stopwatch/Timer
Function.
S- Split / Lap Function
Pauses the Timer display, without
stopping the Timer. If the S/LP prefer-
ence is set to the “Split” option, the
total time elapse from the start of the
Timer to the moment the Skey is
pressed will be displayed. If set to the
“Lap” option, the elapsed time
between presses of Sis displayed.