Caliber RDD883BT User manual

RDD883BT
OPERATING INSTRUCTIONS
DVD/VCD/CD/MP3/USB/SD/MMC PLAYER
FM/AM TUNER

1
Safety Precautions
To ensure safe driving, please adjust the
volume to a safe & comfort level in case of
emergency situations.
Never expose this unit, amplifier, and
speakers to moisture or water for preventing
electric sparks or res.
Please don't change the fuse on the power
cord without professional guidance, using
improper fuse may cause damage to this unit
or even cause re.
Please power off this unit at once and send it
back to the after-sales service center or the
dealer /distributor you purchased from if one
of the following symptoms is found:
(a). No audio output;
(b). No image output;
(c). Water or other obstacle enters the unit;
(d). Smoking;
(e). Peculiar smell.
Only connect the unit to a 12-volt power
supply with negative grounding.
MUTE
OK
MUTE
OK
Never install this unit where the operation &
condition for safety driving is restrained.
MUTE
OK
MUTE
OK
Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the
risk of traffic accident except using for rear
view video camera.
MUTE
OK
MUTE
OK
MUTE
OK
MUTE
OK
Thank you for purchasing this product.
Please read through these operating
instructions so you will know how to operate
your model properly. After you have nished
reading the instructions, keep this manual in
a safe place for future reference.
To provide a clear demonstration and an
alternative for easy understanding of the
operation of this unit, graphic illustration
was used. However, this illustration is not
necessary printed as the actual image found
on the unit.

2
Safety Precautions (continued)
Warning
Operate the unit correctly according to the
manual instruction to prevent unnecessary
problem.
Caution
This product is a CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure. Do not open covers and do not
repair yourself. Refer servicing to qualified
personnel.
Two laser products
Wave length: CD: 780nm DVD: 650nm
Laser power: No hazardous radiation is
emitted with safety protection.
To reduce the risk of fire electric shock, and
annoying interference, use only the included
components.
Caution on using disc
1. DO NOT use irregular shaped disc.
2. Disc Cleaning. Use a dry, soft cloth to
wipe the disc from center to edge, only neutral
detergent can be used.
3. When playing a new disc. New disc may
have some rough spots around the inner and
outer edges. If such a disc is used, remove
these rough spots with a pencil or ball-point
pen, etc.
Contents
Safety Precautions .......................................1
Contents.......................................................2
Features .......................................................3
Panel Controls..............................................4
Remote Controls...........................................5
Basic Operations..........................................7
USB /SD/MMC Card Operation....................8
Disc Operation..............................................9
Tuner Operation .........................................13
Bluetooth Operation....................................14
System Setup.............................................16
Device Connections....................................18
Electrical Connections................................20
Installation Guide........................................21
Troubleshooting..........................................22
Specications .............................................23

3
DVD-R/RW compatibility
It is possible to playback DVD-R/RW discs
recorded with the video format and Video
Recording format.
Video CDs featuring PBC
compatibility
It is possible to playback Video CDs featuring
PBC (playback control).
WMA and MP3 compatibility
It is possible to playback WMA and MP3 les.
About WMA
The Windows Media™ logo printed on the
box indicates that this unit can playback
WMAdata.
!Windows Media and the Windows logo are
trade marks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
!This unit maynot operate correctly depending
on the application used to encode WMA les.
About MP3
Supply of this product only conveys a license
for private, non-commercial use and does
not convey a license or imply any right to use
this product in any commercial (i.e.revenue-
generating) realtime broadcasting (terrestrial,
satellite, cable and/or any other media),
broad-casting/streaming via internet, intranets
and/or other networks or in other electronic
content distribution systems, such as pay-
audio or audio-on-demand applications.
An indepen-dent license for such use is
required. For details, please visit http://www.
mp3licensing.com.
Features
Button Operation Explanations
Touch panel key operation
It is possible to operate this unit by using
touch panel key.
Some frequent operations
1) Move cursor
2) Confirm
Open the SOURCE MENU
Touch the top left corner of TFT screen under
playing mode.
Touch screen
Due to the touch screen, you can fulll most
functions not only by pressing buttons but also
by touching the options you desired.

4
Panel Controls
Press POWER button (3) to turn on/off the unit.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a
safety feature to prevent driver distraction. In-dash DVD video functions will only operate when
vehicle is in Park and the parking brake is engaged. It is illegal in most countries for the driver to
view video while the vehicle is in motion.
1. - Touch panel
2. - Remote sensor
3. - Turn the unit on/off
4. - Select the following sources:
>Radio
>Disc (when disc inserted)
>Card (when SD/MMC card
inserted)
>USB (when USB connected)
>AV1
>AV2
>Blue-tooth
5. - Adjust brightness of screen
6. - Press to adjust volume level.
7. - Mute
8. - Reset
9. - Open the panel/Close the panel
- Hold it to access panel menu:
>Open the panel
>Eject the disc
>Close the panel
>Adjust the panel angle (TILT+/-)
10.- Map card slot (SD/MMC card)
11.- Disc slot
12.- Indicator:
It will light up when you slide the
panel down.
13.- Eject disc (when disc inserted)
- Reset the mechanism (long
press)
Press button (9) to open the panel.
10 11 12 13

5
Remote Controls
Press to turn on/off the unit.
16
1
2
3
17
4
5
6
7
8
9
10
11
13
12
14
15
18
19
20
21
22
23
24
25
26
27
28
29
Remote control operating range
The remote control can operate within a
distance of 3~5m.
1. - Select the following sources:
>Radio
>Disc (when disc inserted)
>Card (when SD/MMC card
inserted)
>USB (when USB connected)
>AV1
>AV2
>Bluetooth
2. - Disc eject
3. - Menu (DVD)
4. - Title (DVD)
5. - Goto search
6. - Radio band
- Video system PAL/NTSC/
AUTO
7. - Sound/display setting
- Setting menu (press 2 sec.)
8. - System setup
9. - Close the panel step by step
10.- Open the panel step by step
11.- Zoom (DVD/VCD)
- Dial/Receive call
12.- Enter
13.- Menu cursor
14.- Stop/Return
15.- Digit area
16.- Enter source menu
17.- Power on/off
18.- Angle (DVD)
19.- DVD subtitle
20.- A-B repeat
21.- Repeat
22.- On screen display
23.- Track random play
24.- Radio tune
- Track skip/seek
25.- Call off/cancel
- Program
26.- Volume
27.- Play/Pause
28.- Mute
29.- DVD audio
- VCD audio L/R/ST

6
Remote Controls (continued)
Replacing the lithium battery of remote control unit
When the range of the operation of the card remote control becomes short or no functions
while operating, replace the battery with a new lithium battery. Make sure the battery polarity
replacement is correct.
1. Open the back cover of the remote control unit.
2. Insert the button-type battery with the stamped (+) mark facing upward.
3. Close the back cover.
Warning
• Store the battery where children cannot reach. If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble or heat the battery or dispose it in a re.
• Do not expose or bring into contact the battery with other metallic materials. Doing this may
cause the battery to give off heat, crack or start a re.
•
When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery
may give off heat, crack or start a re.

7
Basic Operations
Turn on/off the power
1. Press button to turn on the unit.
The unit goes back to the last status after
power on.
2. When on, press button to turn off the
unit.
Mute
Press to cut the sound.
Note:
• Pressing again or adjusting volume will
release muting.
• MUTE appears on the TFT during muting.
Adjust the volume
Press VOL +/- to increase or decrease the
volume level.
The adjustable range of volume is 0 to 40.
Playing source selection
Method 1:
Press SRC button on the panel or remote
control to cycle through all the available
sources.
Method 2:
Open the 'SOURCE MENU' by touching SRC
at the top left corner of the TFT or press
MODE button on remote control, and then
touch the option you desired or select the
option by moving the cursor and then conrm.
Note:
• When some devices are not ready, they
cannot be selected.
• You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.
When parking brake applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving ahead, if the
video disc is played, the screen appears
"WARNING!! Engage Parking Brake to
View Video", and blank screen. The above
warning screen will prevent the driver
watching images. The passengers at the
rear seats can watch normally.
When reverse driving
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.
Steering Wheel Control
Touch the top left of the screen to enter
source menu, touch [ ] button to enter the
unit system setup menu, select [Other].
1. At SWC option, use / button to select a
function, then press and hold a button on
the steering wheel (if your steering wheel
supports this function) until the item on the
screen is lit. Now the function is saved in
the button.
2. Repeat step 1 to set functions of other
steering wheel buttons.
3. Exit the setting menu and you can operate
the player by the buttons on the steering
wheel.
4. If you want to change the setting, enter the
SWC setting menu, select a function on
the screen, press and hold a button on the
steering wheel for more than 2 seconds,
then the function is saved into the button
on the steering wheel. At the same time, all
other steering wheel settings are clear, you
must reset them.

8
USB /SD/MMC Card Operation
Using SD/MMC Card
1. To open the panel rst, press the button
on the panel. Insert an SD/MMC card into
the corresponding slot, the unit will load the
les automatically.
2. To remove the card, you should rst select
another source, in order to avoid damaging
the card, then slide down the panel, press
the card slightly, and take off the card after
it popped out.
Note: You can control the panel using
the touch panel control, refer to previous
section: “Panel Control”.
*The panel will not close if the card was not
fully inserted or was not removed after it
popped..
Using USB device
1. Connect your USB device to the USB cable
which you placed in the dashboard or glove
box during installation of the car radio.
When connecting a USB device, the unit
will read the les automatically.
2. To remove the USB device, you should
rst select another source, in order to avoid
damaging the USB device.
USB/SD/MMC Notes
USB functions (ash memory type) MP3 music
play
1. SD/MMC card support
2. USB ash memory 2 in 1 support
3. Fat 12/fat 16/fat 32 is possible
- Fat 12/16 (dir: 200 support, file: 500
support)
- Fat 32 (dir: 200 support, le: 500 support)
4. File name: 32 byte/dir name: 32 byte /tag
name: 32 byte
5. Tag (ID3 tag ver 2.0)
- Title/artist/album: 32 byte support
6. USB 1.1 support
USB 2.0 support
(It can not support USB 2.0 speed. Just,
get the same speed with USB 1.1)
Not all kinds of USB devices are
compatible with the unit.

9
Disc Operation
Insert a disc
Press on the panel to slide down the panel.
Insert a disc into the slot, and the unit will
change to disc mode automatically.
Note:
• Please confirm whether there is a disc in
the unit before you insert another one.
• The unit will exit current playing source and
enter DVD mode when one disc is inserted.
• Some recorded discs, such as CD-R,
CD-RW, DVD-R, DVD+R, DVD-RW,
DVD+RW cannot be played back because
of different recording status. Otherwise,
the discs without being closed could not be
played back.
Eject the disc
Method 1:
Press on the panel to slide down the panel.
Press (EJECT) to eject the disc.
Method 2:
Press on the panel more than 2 seconds
to enter panel menu, and touch EJECT on the
TFT to eject the disc.
Method 3:
Press on the remote control to eject the
disc.
Notes:
• After ejecting the disc, the unit reverts to
SD card mode automatically if you have
inserted one SD card, or the unit reverts to
radio mode.
• You can eject a disc when the unit has
powered off. The unit remains off after the
disc has been ejected.
• If the disc is not removed from the unit
within 10 seconds, the disc will be reloaded
to prevent accidental damage.
Using the touch screen controls
The touch key areas for VCD/DVD playback
are outlined below:
A - Turn to main source menu
B - Display on screen control menu
Disc Playback
1. When disc inserted, display shows “READ”.
For MP3 or disc with mixed files, reading
time may exceed 1 minute.
2. “ERROR” will be displayed if error found in
disc operation.
3. While CD/MP3/WMA files playback, CD/
MP3/WMA playback menu will appear on
the display.
4. For DVD, DVD icon will appear on the
display and TITLE appears. Press [ ] to
play.
5. For VCD, VCD icon will appear on the
display.
6. When video disc is playing, touch the
screen, some touch keys will appear.
File type supported
Audio file: MP3(*.mp3), WMA(*.wma)
Video file:
MP4 (*.avi,)
MPEG 2 (*.vob)
MPEG 1 (*.dat)
Picture file: JPEG (*.jpg)
MP3 file:
ISO 9660 or ISO 9660 + Joliet format - Max.
30 characters.
Max. nested directory is 8 levels.
The max. album number is 99.
The max. length of each track is 99 minutes
59 seconds.
Supported sampling frequency for MP3 disc:
8KHz to 48KHz (44.1KHz preferably).
Supported bit-rates of MP3 disc are: 32 - 320
kbps (128 kbps preferably).

10
Disc and le NOT supported
*.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files
and les with DRM.
Open session discs.
Stop playback temporarily
-During playback, press to pause
playback.
- The sound will be muted.
-Display "PAUSE " in the TV screen.
Press again to continue playback.
To resume normal play, repeat the
operation.
Stop playback entirely
During DVD, VCD, CD, MP3 playback:
1. Press key on remote control once
stopping the playback and the relevant
location on the disc is saved, press to
resume the playback from the saved disc
location.
2. Press twice to cease the playback. Press
to start the playback from the very
beginning the Title page of the DVD or the
rst track of VCD / CD.
Select desired track
- Press or to skip to the next track.
-Use 1-9 and 0, 10+ buttons on the remote
control to select desired track number.
Fast forward/backward during
playback
Press [ / ] for more than 2 seconds
repeatedly to select X2, X4, X8, X20 to fast
backward or forward track during playback.
-During the fast forward or backward
operation, press [ ] briefly to playback
again.
-During the fast forward or backward
operation, the volume will be muted.
Random track playback (for CD/
VCD/MP3 Only)
You can play all the tracks in random order.
1. During playback, press [ ].
- “SHUFFLE“ appears on the display.
2. Press [ ] again to select normal
playback.
Repeat
During playback, press [ REPT ] or [ ]
repeatedly.
- RPT icon will appear on the display.
-For VCD/CD: Display appears REP 1
REP ALL OFF
- For DVD: Display appears CHAPTER
TITLE REP ALL OFF
-For File disc: Display appears REP 1
REP DIR REP ALL OFF
Note:
If you do not select RPT on, when the entire
disc or TITLE playback has finished, the
system will stop. If no other control, after 5
minutes the unit will turn into standby mode.
Repeat A - B
Select desired passage to repeat playback.
-Press REPT A - B once to select starting
point Display shows REPEAT A.
-Press REPT A - B again to select ending
point.
Display shows REPEAT A - B, and selected
passage start to replay.
-Press REPT A - B once again to exit. Display
shows A - B CANCELLED.
GOTO
Goto desired track/chapter or time point
directly.
Press [ GOTO ] button on the remote control,
track or DVD Title/Chapter and time display on
top of the screen. Current item is highlighted.
Use [ / ] to select desired item. Use
digit button to select number. Press [OK] to
conrm.
Program
-Press [ PROG ] to enter program list. Use
[ / ] or [ / ] cursor and digit button to
enter number.
For DVD and File disc, select title and
chapter number.
For VCD and CD, select track number.
-Press [ ] to play, or move the cursor to
select “PLAY” and press [ OK ] to play.
-If you want to delete the list, move the
cursor to “CLEAR”, press [ OK ] to delete
all the list set before.
- Press [ PROG ] again to exit program play.
Disc Operation (continued)

11
DVD Audio Select
Press [ AUDIO ] to select audio language to
listen if the DVD has multiple audio languages.
VCD Audio Select
Press [ AUDIO ] to select audio channel to
listen.
L R Stereo
DVD Subtitle Select
Press [ SUBTITLE ] to select the subtitle
language to show if the DVD has multiple
language subtitles.
DVD Title Select
Press [ TITLE ] to display title or chapter list,
use [ / ] or [ / ] cursor or digit number
to select, press [ OK ] to play.
DVD Angle Select
Press [ ANGLE ] to select different angle to
view if the DVD has multiple-angle views.
ZOOM
Press ZOOM button, the picture will be
zoomed accordingly.
Disc Operation (continued)
DVD Playback Menu
During playback touch the center of the screen:
Touch the icon to access desired function.
1. Subtitle select
2. Repeat playback
3. Audio select
4. Menu play
5. Select title
6. Track skip/seek
7. Play/Pause
8. Stop
9. Display audio/video setting menu
Video VCD Playback Menu
During playback touch the center of the screen:
Touch the icon to access desired function.
1. Random play
2. Repeat play
3. Audio select
4. Menu play
5. Track skip/seek
6. Play/Pause
7. Stop
8. Display audio/video setting menu

12
Disc Operation (continued)
MP3/MP4/PHOTO Menu
DISC
Mariah Carey
No fatman scoop
It’s Like That
3:02 13:04
CD/MP3/MP4/PHOTO Menu
During playback touch the center of the screen:
MP3
Hero.mp3
Long night.mp3
All
Leave me alone
When I’m gone
1. Display source menu
2. Display audio/video setting menu
3. Current time
4. Folder/le list
5. Repeat playback
6. Previous/next page
7. Random play
8. Play/Pause
9. Stop
10. Show audio le
11. Show video le
12. Show photo le
13.back to up folder
14.Show next menu
15.Current track number/total track number
16.Playback information
17.Track skip/seek
18.Play/Pause
19.Stop
20.Show previous menu
PHOTO Intro Menu
During intro photos, touch the center of the
screen:
Touch to access desired function.
1. Rotate the picture anticlockwise/clockwise.
2. Mirror the picture vertically/horizontally
3. Zoom
4. Previous/next picture
5. Play/Pause
6. Stop
7. Display audio/video setting menu

13
Tuner Operation
Radio Menu
Touch to access desired function:
1. Display source menu
2. Display audio/video setting menu
3. Current time
4. Tuner information
5. Touch to tune automatically.
Press more than 2 seconds to tune
manually.
6. Select previous/next preset station.
7. Show next menu
RADIO
RADIO
8. Tuner information
9. Preset stations
10.Touch to tune automatically.
Press more than 2 seconds to tune
manually.
11.Band switch
12.Auto search and store stations
13.Show previous menu
RDS Basics
RDS service availability varies with areas.
Please understand if RDS service is not
available in your area, the following service is
not available.
AF Mode
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(program identication) as the current station
but with stronger signal strength.
Touch [ ] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then
select AF on or off.
AF ON: AF function is activated.
AF OFF: AF function is disabled.
Remark: AF indicator on LCD will ash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
TA Mode
Some RDS FM stations periodically provide
trafc information.
TP (Trafc Program Identication)
Broadcasting of trafc information
TA (Trafc Announcements Identication)
Radio announcements on trafc conditions
Touch [ ] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then
select TA on or off.
When TA mode is turned on, the TA indicator
will blink.
When trafc announcement is received, the TA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TA is turned on, SEEK, SCAN, AMS function
can only be received or saved when traffic
program identication (TP) code is received.

14
Bluetooth OperationTuner Operation (continued)
Note:
For your safety, avoid talking on the phone as
much as possible while driving.
Bluetooth is a wireless transmission way
for short distance. The built-in Bluetooth
can connect with the mobile phones having
Bluetooth function.
After connecting, you can control your mobile
phone through the unit.
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
Press the SRC button repeatedly on the panel
or touch BT on the source menu to enter
Bluetooth mode.
BT
10
11
1. Display source menu
2. Display audio/video setting menu
3. Current time
4. BT information
5. Display LOG menu
6. Previous track
7. Play/Pause
8. Next track
9. Keypad
10. Terminate call
11. Dial
Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to the unit
and start to search for Bluetooth devices.
After “CALIBER” appears on the pairing list
of your mobile phone, select it. At this time, a
pairing code is required. Enter the pairing code
(“1234” by default) and the Bluetooth pairing
will process automatically. Some mobile
phones may instruct you to select connect or
disconnect, please select connecting.
TA SEEK/TA ALARM
Touch [ ] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then
select TA Seek or TA Alarm.
If the TA (Trafc Announcements) is turned on
and there is no traffic program identification
code received in the specied time, no TA/TP
will display and either TA ALARM or TA SEEK
will be activated.
TA ALARM mode: Alarm is turned on.
TA SEEK mode: TA SEEK is automatically
activated.
TA VOL
Touch [ ] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then touch
/ to adjust TA volume.
REG Mode
Touch [ ] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then
select REG on or off.
REG ON: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG OFF: AF function will ignore the regional
code (of the PI) and stations in the other
regions can also be tuned automatically.
EON (Enhanced Other Networks)
When EON data is received, the EON
indicator lights and the TA and AF functions
are enhanced.
TA: Traffic information can be received from
the current station or stations in other network.
AF: The frequency list of preset RDS stations
is updated by EON data. EON enables the
radio to make fuller use of RDS information.
It constantly updates the AF list of preset
stations, including the one that currently tuned
into. If you preset a station around the area at
your home, you will later be able to receive the
same station at an alternative frequency, or
any other station serving the same program,
EON also keeps track of locally available TP
stations for quick reception.

15
After pairing successfully, the Bluetooth icon
lights up. Touch and hold button to
disconnect.
Dial
KEY PAD
13800138000
123
456
789
*
0#
1. Touch to open keypad, input dial
number by the number buttons, touch
KEY PAD
13800138000
123
456
789
*
0#
to erase previous number. Touch
KEY PAD
13800138000
123
456
789
*
0#
to conrm and dial out.
2. Touch or press key on the
remote control to cancel.
3. At BT main menu, touch to dial out
the last dialled number.
Receive
1. After pair is successful, if there is an
incoming call, the unit switches to BT mode
automatically.
2. Touch or press key on the
remote control to receive.
3. Touch or press key on the
remote control to hang up.
History
After pair is successful, touch
BT
10
11
to open
LOG menu.
LOG
Phone book
SIM Phonebook
10.Dial
11.Page up
12.Page down
13.Phone book
14.Received calls
15.Dialled numbers
16.Missed calls
17.Show previous menu
BT MENU General Operation
Press the [SRC] button on the panel or touch
top left of the screen to enter Source menu,
touch [ ] button to enter the unit system
setup menu, then touch BT to enter BT setting
menu.
1. Pair On/Off
Set the automatically pair on or off. If select
On, the unit will pair automatically.
2. Auto Connect On/Off
Set the automatic connection on or off.
When Auto Connect On and Paired OK, if the
distance is over 10 metres, the connection
will exit. The Bluetooth technology will
automatically establish a connection between
the unit and the registered mobile phone when
the transmission distance is 10 metres or
shorter.
When Auto Connect Off and Paired OK, if the
distance is over 10 metres, the connection
will exit. The Bluetooth technology will not
automatically establish a connection between
the unit and the registered mobile phone when
the transmission distance is 10 metres or
shorter.
Whether the automatic connections is set ON
or OFF, when power is off then on again, the
unit Bluetooth will connect the mobile phone
(if the Bluetooth function was turned on) which
was paired OK last time.
3. Auto Answer On/Off
Set the automatic answering a call ON/OFF.
When Auto Answer On and Paired OK, if there
is an incoming call, in 15 seconds, the unit
will answer automatically, and voice will be
transferred to the unit too.
When Auto Answer Off and Paired OK, if there
is an incoming call, the unit will not answer
automatically until you choose receiving or
rejecting.
Bluetooth Operation (continued)

16
System Setup
Audio/Video Setting
You have 2 methods to enter audio/video
setting menu.
Method 1: Touch SEL on the TFT.
Method 2: Press the SEL button on the
remote control.
1. Touch [ / ] button on the TFT to adjust
Bass/Middle/Treble.
2. Touch [ / ] on the TFT to select preset EQ.
3. Touch to access EQ setting menu.
4. Touch to access Fader/Balance menu, then
touch [ / / / ] on the TFT to adjust.
5. Touch to access Video setting menu, then
touch [ / ] button on the TFT to adjust
brightness, Contrast/Colour/Dimmer of the
TFT.
6. Touch to exit audio/video setting menu and
return to previous mode.
SETUP Menu
You have 3 methods to enter setup menu.
Method 1: Select on the source menu
Method 2: Press the VOL knob more than 2
seconds.
Method 3: Press the SETUP button on the
remote control.
12H 24H
R
22
BT TV OTHER
BT
Pair
AutoConnect
Auto Answer
Reset
12
1. Display source menu
2. Current time
3. Adjustable options
4. Page up/down
5. Touch to access general setting options
6. Touch to access language setting options
7. Touch to access DVD setting options
8. Touch to access radio setting options
9. Touch to show next page of setting menu
10.Touch to access BT setting options
11.Touch to access other setting options
12.Touch to show previous page of setting
menu
General Setting
Beep: On, Off
Touch [On] or [Off] to select beep sound on
or off.
Loudness: On, Off
Touch [On] or [Off] to select loudness on or
off.
Time Mode: 12H, 24H
Touch [12H] or [24H] to select 12 or 24 hour
time format.
Time Adjust:
12H 24H
R
22
02:20
Touch left side of
12H 24H
R
22
02:20 to active hour
setting, touch
12H 24H
R
22
/
12H 24H
R
22
to adjust. Touch right
side of
12H 24H
R
22
02:20 to active minute setting, touch
12H 24H
R
22
/
12H 24H
R
22
to adjust.
Subwoofer: Off, 80Hz, 120Hz, 160Hz
Touch [Off] to turn off the subwoofer, touch
[80Hz], [120Hz] or [160Hz] to set subwoofer
frequency.

17
Subw Volume: ,
When the subwoofer on, touch [ ] / [ ] to
adjust subwoofer volume.
Mirror: On, Off
Touch [On] or [Off] to select mirror or normal
display.When you enter MIRROR IMAGE ON
mode, the video of camera is mirror image.
Parking: On, Off
Touch [On] or [Off] to turn on or off the parking
mode. At PARKING ON mode, play video
disc, the screen appears as a blank screen.
Language Setting
OSD Language
Audio Language
Subtitle Language
Menu Language
Touch the language to the right of the option
to show all the optional languages, touch to
select. Touch to return to previous menu
without any modication.
If the DVD disc has the audio file in the
selected language, the dialogues you listened
to will be in the selected language.
If the DVD disc does not contain the audio le
in the selected language, the dialogues you
listened to will be in the default language.
You can change the language by pressing
[AUDIO] key of the remote controller.
DVD Setting
TV System: NTSC, PAL, Auto
Touch [NTSC], [PAL] or [Auto] to select TV
system.
TV Type: 4:3PS, 4:3LB, 16:9
Touch [4:3PS], [4:3LB] or [16:9] to select TV
type to watch wide screen movies.
4:3 Pan Scan: For 4:3 TV, left and right edges
will be cut.
4:3 Letter Box: For 4:3 TV, black bars will
appear on top and bottom.
16:9: For 16:9 wide screen TV.
Password: Set
Touch [Set] to open keypad, enter rating
password by the number buttons. Touch
KEY PAD
13800138000
123
456
789
*
0#
to erase previous number. Touch
KEY PAD
13800138000
123
456
789
*
0#
to confirm. The original password is
“0000“.
After you enter the password, [UNLOCK]
appears on the screen, now you can adjust
the rating level. If you want to [LOCK] it, enter
a 4-digit password in the keypad.
Rating: ,
Touch [ ] / [ ] to select a rating level.
The rating of the disc is from 1 to 8:
(1) with the most limits when playing.
(8) with the least limits when playing.
Original setting: 8
Brightness: ,
Touch [ ] / [ ] to set brightness of the video
output.
Contrast: ,
Touch [ ] / [ ] to set contrast of the video
output.
Hue: ,
Touch [ ] / [ ] to set hue of the video output.
Saturation: ,
Touch [ ] / [ ] to set saturation of the video
output.
Default: Restore (only DVD)
Touch [Restore] to load original setting.
Radio Setting
LOC_DX: LOC, DX
Touch [LOC] or [DX] to select radio local or
distant.
LOC: Only stations with strong signal can
be broadcast.
DX: Stations with strong and weak signals
can be broadcast.
Stereo_Mono: Mono, Stereo
Touch to select FM stereo or mono.
AF: On, Off
Touch [On] or [Off] to select alternative
frequency on or off.
TA: On, Off
Touch [On] or [Off] to select traffic
System Setup (continued)

18
announcement on or off.
TA mode: Seek, Alarm
Touch [Seek] or [Alarm] to select traffic
announcement’s active mode.
REG: On, Off
Touch [On] or [Off] to select whether identify
the regional code when tuning.
RDS CT: On, Off
Touch [On] or [Off] to select whether
synchronize clock time with the signal source.
BT Setting
Pair: On, Off
Touch [On] or [Off] to choose pair
automatically on or off.
Auto Connect: On, Off
Touch [On] or [Off] to choose connect
automatically on or off.
Auto Answer: On, Off
Touch [On] or [Off] to choose answer
automatically on or off.
PIN Code: Set
Touch [Set] button to open keypad, then
set the bluetooth password by the number
buttons. Touch
KEY PAD
13800138000
123
456
789
*
0#
the erase previous
number. Touch
KEY PAD
13800138000
123
456
789
*
0#
to conrm .The original
password is “1234”.
To reset the password, you should enter
the original password first, then input a new
password, touch
KEY PAD
13800138000
123
456
789
*
0#
to conrm, input the
password again to conrm.
Other Setting
SWC (Steering Wheel Control)
refer to <Basic Operations>.
TS: Adjust
Touch [Adjust] to calibrate the screen.
When the touch operation is not sensitive or
valid, you should calibrate the touch screen
through “TS Calibrate” function.
System Setup (continued) Device Connections
Notes of connection
•This unit is designed to be used in a
vehicle with a 12-volt battery and negative
grounding. Before installing this unit to a
recreational vehicle, a bus, or a truck, make
sure the battery voltage is appropriate for
this unit to be used, otherwise, install a
transformer by professional to convert the
output voltage to 12V.
•To avoid short circuit in the electrical
system, ensure that the negative battery
cable is disconnected before installation.
•To prevent short circuit in the wiring and
damaging to this unit, secure all wirings
with cable clamp or adhesive tape. Route
the wirings in a secured, out of heating
place without touching any moving parts
such as gear shift, handbrake, and seat
rails to prevent the wiring insulation being
melted / worn off.
•Never pass the yellow power cord through
the installation hole into the engine
compartment and connect to the car
battery. Otherwise, a high possibility of
serious short circuit to the electrical system
may occur.
•Replacing a new fuse with 15A rating
when the old one is broken, using no
fuse or fuse with improper rating may
cause damage to this unit or even fires.
If a proper fuse is installed and electrical
problems still occur, please contact your
local authorised service agent.
•DO NOT connect other equipments with
the car battery to avoid battery overheating.
•Please make sure all the wiring
connections & the cables of the Speakers
are well-insulated. Otherwise, this unit may
be damaged by short circuit.
•If there is no ACC available, please
connect ACC lead to the power supply with
a switch.
• If an external power amplier is connected,
please don't connect P.CONT lead to the
power lead of the external power amplier,
otherwise, electric spark or other damage
may result.
•Never ground the speaker output to
prevent the damage to the built-in power
amplier.

19
Parking Brake Cable Connections
Reverse Driving Cable Connections
Device Connections (continued)
Key A: Connect to steering
wheel control cable
Key A
SWC
Key B (standby)
Key B GND GND
Steering Wheel Control Cable Connections