Calibre HQPro1000 User manual

HQPro1000
User’s Manual

Issue 1.0 HQPro1000 User’s Guide
2
This page is intentionally left blank

Issue 1.0 HQPro1000 User’s Guide
3
COPYRIGHT
This document and the software described within it are copyrighted with all rights reserved. Under
copyright laws, neither the documentation nor the software may be copied, photocopied, reproduced,
translated, or reduced to electronic medium or machine-readable form, in whole or in part, without
prior written consent of Calibre UK Ltd ("Calibre"). Failure to comply with this condition may result in
prosecution.
Calibre does not warrant that this product package will function properly in every hardware/software
environment.
Although Calibre has tested the hardware, firmware, software and reviewed the documentation,
CALIBRE MAKES NO WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO
THIS HARDWARE, FIRMWARE, SOFTWARE OR DOCUMENTATION, THEIR QUALITY, PERFORMANCE,
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. THIS SOFTWARE AND DOCUMENTATION
ARE LICENSED 'AS IS', AND YOU, THE LICENSEE, BY MAKING USE THEREOF, ARE ASSUMING THE ENTIRE
RISK AS TO THEIR QUALITY AND PERFORMANCE.
IN NO EVENT WILL CALIBRE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE OR
DOCUMENTATION, even if advised of the possibility of such damages. In particular, and without
prejudice to the generality of the foregoing, Calibre has no liability for any programs or data stored or
used with Calibre software, including costs of recovering such programs or data.
UK Office:
Cornwall House, Cornwall Terrace
Bradford, West Yorkshire
BD8 7JS, England
APAC Office:
No. 11, Li Hsing Rd., Science Park,
Hsinchu, Taiwan, R.O.C.
America: +1 (916) 282-1067
Europe: +44 1274940770
China: +86 95013 5890 6926
APAC, Australia & NZ: +886 989 997068
Email techsupport@calibreuk.com
Web-site www.calibreuk.com
Copyright (c) 2019 All World-wide Rights Reserved
All trademarks acknowledged
Calibre operates a policy of continued product improvement; therefore specifications are subject to
change without notice as products are updated or revised.
E&OE.

Issue 1.0 HQPro1000 User’s Guide
4
Table of Contents
TABLE OF CONTENTS.......................................................................................................... 4
LIST OF FIGURES .................................................................................................................. 9
LIST OF TABLES .................................................................................................................... 9
REVISION TABLE ................................................................................................................10
SAFETY WARNINGS...........................................................................................................11
1INTRODUCTION ..........................................................................................................12
1.1 SYSTEM OVERVIEW........................................................................................................................12
1.2 UNIT SETUP..................................................................................................................................13
2UNIT DESCRIPTION.....................................................................................................14
2.1 FRONT PANEL LAYOUT....................................................................................................................14
2.1.1 Front Panel Shortcuts:........................................................................................................15
2.1.2 Button behaviour tables.....................................................................................................16
2.1.2.1 Presets 1 thru 10 ..........................................................................................................................................16
2.1.2.2 Preset Preview (PRV)....................................................................................................................................16
2.1.2.3 Test Pattern (TP), Black (BLK) .......................................................................................................................16
2.1.2.4 FREEZE (FRZ).................................................................................................................................................16
2.1.2.5 Area of Interest (AOI)...................................................................................................................................17
2.1.2.6 Layers 1 thru 4..............................................................................................................................................17
2.1.2.7 HDMI1, HDMI2 & Input Module (Card) Inputs.............................................................................................17
2.1.2.8 LOGO............................................................................................................................................................18
2.2 REAR PANEL LAYOUT......................................................................................................................19
3MAIN UNIT PRODUCT SPECIFICATION ...................................................................20
3.1.1 Power Supply Requirement................................................................................................20
3.2 INPUT SPECIFICATIONS....................................................................................................................20
3.2.1 4K HDMI.............................................................................................................................20
3.2.2 4K DP Input (General Input Module Only) .........................................................................20
3.2.3 3G-SDI Input (General Input Module Only)........................................................................20
3.2.4 Genlock Input with Loop through ......................................................................................20
3.3 OUTPUT SPECIFICATIONS ................................................................................................................21
3.3.1 HDMI Outputs ....................................................................................................................21
3.3.2 HDCP Output encryption....................................................................................................21
3.3.3 Audio Output......................................................................................................................21
3.3.4 Supported Formats (Resolutions and Frame rates) ...........................................................22
3.4 COMMUNICATIONS SPECIFICATION...................................................................................................23
3.4.1 TCP/IP Port.........................................................................................................................23
3.4.2 Serial Communication Settings (RS232).............................................................................23
4UNIT CONTROL ...........................................................................................................24
5FRONT PANEL MENUS ...............................................................................................24
5.1 MAIN (TOP)MENU .......................................................................................................................24
5.2 INPUT MENU ................................................................................................................................25
5.2.1 Sources Config....................................................................................................................25

Issue 1.0 HQPro1000 User’s Guide
5
5.2.1.1 Colour space.................................................................................................................................................25
5.2.1.2 Range ...........................................................................................................................................................25
5.2.1.3 Deep Colour .................................................................................................................................................25
5.2.1.4 EDID Resolution............................................................................................................................................25
5.2.1.5 EDID Frame Rate ..........................................................................................................................................25
5.2.1.6 HDCP ............................................................................................................................................................26
5.2.1.7 Colour Adjustments......................................................................................................................................26
5.2.1.7.1 Black-Level Offset ...................................................................................................................................26
5.2.1.7.2 Brightness...............................................................................................................................................26
5.2.1.7.3 Contrast..................................................................................................................................................26
5.2.1.7.4 Saturation...............................................................................................................................................26
5.2.1.7.5 Hue .........................................................................................................................................................26
5.2.1.7.6 RGB values..............................................................................................................................................26
5.2.1.7.7 Colour Temp ...........................................................................................................................................27
5.2.1.7.8 Input Gamma..........................................................................................................................................27
5.2.1.8 Picture Format..............................................................................................................................................28
5.2.1.8.1 Original ...................................................................................................................................................28
5.2.1.8.2 Stretch ....................................................................................................................................................28
5.2.1.8.3 Crop ........................................................................................................................................................29
5.2.1.8.4 Anamorphic: ...........................................................................................................................................29
5.2.1.9 Area-of-Interest (AOI) ..................................................................................................................................29
5.2.1.9.1 AOI Enable ..............................................................................................................................................29
5.2.1.9.2 HSize.......................................................................................................................................................29
5.2.1.9.3 Aspect Lock.............................................................................................................................................29
5.2.1.9.4 VSize .......................................................................................................................................................30
5.2.1.9.5 HPos........................................................................................................................................................30
5.2.1.9.6 VPos........................................................................................................................................................30
5.2.1.9.7 AOI Reset................................................................................................................................................30
5.2.1.10 Sharpness.................................................................................................................................................31
5.2.1.11 HDMI Audio Support................................................................................................................................31
5.2.1.12 SDI Setup (Optional GIM card).................................................................................................................31
5.2.1.12.1 SDI to HDMI Audio................................................................................................................................31
5.2.1.13 SDI Level B Stream ...................................................................................................................................31
5.2.2 Test Pattern Setup..............................................................................................................31
5.2.2.1 Test Pattern Selection ..................................................................................................................................31
5.2.2.2 Test Pattern Tone.........................................................................................................................................32
5.2.2.3 Moving Cross parameters ............................................................................................................................32
5.2.2.3.1 Color (FG) of the Moving Cross...............................................................................................................32
5.2.2.3.2 Moving Cross Background (BG) color .....................................................................................................32
5.2.2.3.3 Moving Cross Speed ...............................................................................................................................33
5.2.2.3.4 Moving Cross Width ...............................................................................................................................33
5.2.3 Input Enable.......................................................................................................................33
5.3 OUTPUT.......................................................................................................................................34
5.3.1 Main Output and Quad Output Format.............................................................................34
5.3.1.1 Output Resolution........................................................................................................................................34
5.3.1.2 Output Frame Rate.......................................................................................................................................34
5.3.1.3 Custom Modes (Resolutions) .......................................................................................................................34
5.3.2 Gamma/Colour/Crush........................................................................................................35
5.3.2.1 Colour Temperature.....................................................................................................................................35
5.3.2.2 Output Gamma ............................................................................................................................................35
5.3.2.3 Black Crush...................................................................................................................................................35
5.3.3 Output Config.....................................................................................................................35
5.3.3.1 HDMI Output................................................................................................................................................35
5.3.3.2 DVI Colour Space..........................................................................................................................................36
5.3.3.3 DVI Range.....................................................................................................................................................36
5.3.4 Confidence Monitor Output...............................................................................................37
5.3.5 I/O Lock..............................................................................................................................38
5.3.5.1 I/O Lock = Off (Free Run)..............................................................................................................................38
5.3.5.2 I/O Lock = Source .........................................................................................................................................38
5.3.5.3 I/O Lock = Low Latency.................................................................................................................................38

Issue 1.0 HQPro1000 User’s Guide
6
5.3.5.4 I/O Lock = Genlock .......................................................................................................................................39
5.4 LED SCREEN SIZE...........................................................................................................................40
5.4.1 Single LED Wall Size Adjustments ......................................................................................40
5.4.2 Splicing Width & Height (Quad Output Module) ...............................................................41
5.4.3 Standard or Advanced Splicing (Quad Output Module).....................................................41
5.4.4 LED Wall Splicing Examples ...............................................................................................42
5.4.4.1 Standard Splicing - 2x1 Example...................................................................................................................42
5.4.4.2 Advanced Splicing - 2x1 Example .................................................................................................................43
5.4.4.3 Standard Splicing - 2x2 Example...................................................................................................................44
5.4.4.4 Advanced Splicing - 2x2 Example .................................................................................................................44
1.1 Layers.....................................................................................................................................45
5.4.5 Background........................................................................................................................45
5.4.6 Layers Sources....................................................................................................................45
5.4.7 Layer Priorities ...................................................................................................................46
The z-order cannot change........................................................................................................................................46
5.4.8 Layer Modes.......................................................................................................................46
5.4.9 Fade (Transition) speed......................................................................................................48
5.4.10 Layer (PiP) Position & Size..................................................................................................48
5.4.10.1 PiP Position ..............................................................................................................................................48
5.4.10.1.1 PiP H-Pos...............................................................................................................................................48
5.4.10.1.2 PiP V-Pos...............................................................................................................................................48
5.4.10.2 PiP Size.....................................................................................................................................................49
5.4.10.2.1 PiP Width..............................................................................................................................................49
5.4.10.2.2 PiP Height .............................................................................................................................................49
5.4.10.3 Horizontal Flip..........................................................................................................................................49
5.4.10.4 Vertical Flip ..............................................................................................................................................49
5.4.10.5 Layer Freeze.............................................................................................................................................49
5.5 LAYER WIREFRAME PREVIEW...........................................................................................................50
5.6 PRESETS.......................................................................................................................................51
5.6.1 Store a Preset.....................................................................................................................51
5.6.2 Recall a Preset....................................................................................................................51
5.6.3 Erase a Preset.....................................................................................................................51
5.6.4 Preset Conflict ....................................................................................................................51
5.6.4.1 Preset Conflict examples..............................................................................................................................51
5.7 PRESET WIREFRAME PREVIEW .........................................................................................................52
5.8 SYSTEM........................................................................................................................................53
5.8.1 Names/Profiles...................................................................................................................53
5.8.2 User....................................................................................................................................53
5.8.3 Menu Settings....................................................................................................................53
5.8.3.1 Language ......................................................................................................................................................53
5.8.3.2 Keypad Lock .................................................................................................................................................53
5.8.3.3 Menu Time ...................................................................................................................................................54
5.8.3.4 LCD Backlight................................................................................................................................................54
5.8.3.5 Jog Push Enable............................................................................................................................................54
5.8.4 Network Settings................................................................................................................55
5.8.5 Security Settings.................................................................................................................55
5.8.6 Factory Defaults.................................................................................................................55
5.9 AUDIO .........................................................................................................................................56
5.9.1 Audio Volume.....................................................................................................................56
5.9.2 Audio Priority .....................................................................................................................56
5.9.3 Audio Delay........................................................................................................................56
5.9.4 Audio Mute ........................................................................................................................56
6WEB BROWSER CONTROL .........................................................................................57

Issue 1.0 HQPro1000 User’s Guide
7
6.1 CONNECTING TO THE UNIT ..............................................................................................................57
6.2 WEB PAGE MENU ORIENTATION.......................................................................................................58
6.3 SOFTWARE UPDATE .......................................................................................................................59
6.4 BACKUP AND RESTORE....................................................................................................................59
6.5 LOGO &CUSTOM TEST PATTERNS..................................................................................................59
7FIRMWARE UPDATE ...................................................................................................60
7.1 USB UPDATE ................................................................................................................................60
7.2 WEB BROWSER UPDATE .................................................................................................................60
7.3 SYSTEM RESTORE FROM AN IMAGE FILE .............................................................................................60
8OPTIONAL MODULES .................................................................................................61
8.1 GENERAL INPUT MODULE (GIM).....................................................................................................61
8.1.1 Module Description............................................................................................................61
8.1.2 Module Specification..........................................................................................................62
8.1.2.1 4K 2.0 HDMI .................................................................................................................................................62
8.1.2.2 4K 1.2 DP Input.............................................................................................................................................62
8.1.2.3 3G-SDI Input .................................................................................................................................................62
8.2 QUAD 2K HDMI OUTPUT CARD ......................................................................................................62
8.2.1 Module Description............................................................................................................62
8.2.2 Module Specification..........................................................................................................63
9USING THE FRONT PANEL .........................................................................................64
9.1 FRONT PANEL MENU TREE..............................................................................................................64
9.1.1 Input Menu.........................................................................................................................65
9.1.2 Output Menu......................................................................................................................69
9.1.3 LED Screen Sizing Menu .....................................................................................................71
9.1.4 Layer Menu ........................................................................................................................72
9.1.5 Presets................................................................................................................................74
9.1.6 Audio..................................................................................................................................74
9.1.7 System................................................................................................................................75
9.1.8 Status .................................................................................................................................76
9.2 BUTTON COLOUR CODES FOR THE OPERATION EXAMPLES .....................................................................77
9.3 FRONT PANEL OPERATION EXAMPLES ................................................................................................78
9.3.1 Switch between two layers with two different inputs .......................................................78
9.3.2 Switch between two inputs on the same layer ..................................................................79
9.3.3 Resize layers.......................................................................................................................80
9.3.4 Remove a Layer..................................................................................................................81
9.3.5 Assign source to the same layer from the same input card...............................................82
9.3.6 Store a Preset.....................................................................................................................83
9.3.7 Delete a Preset...................................................................................................................84
10 ENVIRONMENTAL AND EMC .................................................................................85
10.1 OPERATING CONDITIONS.............................................................................................................85
10.2 STORAGE ..................................................................................................................................85
10.3 CE AND FCC COMPLIANCE ..........................................................................................................85
10.4 PAT TESTING ............................................................................................................................85
11 DIMENSIONS ............................................................................................................86
12 WEIGHT .....................................................................................................................86

Issue 1.0 HQPro1000 User’s Guide
8
13 POWER.......................................................................................................................86
14 WARRANTY...............................................................................................................86
APPENDIX A RELEASE 1 & 2 HARDWARE & FEATURES ............................................87

Issue 1.0 HQPro1000 User’s Guide
9
List of Figures
Figure 1: HQPro1000 Front Panel............................................................................................................14
Figure 2: HQPro1000 Rear Panel ............................................................................................................19
List of Tables
Table 1: Input and Outputs......................................................................................................................15
Table 2: Input and Output formats..........................................................................................................22
Table 3: Serial Connector Pinout ............................................................................................................23
Table 4: RS-232 communication settings ...............................................................................................23

Issue 1.0 HQPro1000 User’s Guide
10
Revision Table
Version
Author
Modification
Date
1.0
GK
Initial Release
02-Jul-2019

Issue 1.0 HQPro1000 User’s Guide
11
Safety Warnings
•THERE ARE NO USER SERVICEABLE PARTS WITHIN THE UNIT. REMOVAL OF THE TOP COVER
WILL EXPOSE THE USER TO DANGEROUS VOLTAGES. DO NOT OPERATE THE UNIT WITHOUT
THE TOP COVER INSTALLED.
•ENSURE THAT ALL ELECTRICAL CONNECTIONS (INCLUDING THE MAINS PLUG AND ANY
EXTENSION LEADS) COMPLY WITH ELECTRICAL SAFETY REGULATIONS.
•CONNECT ONLY LOW VOLTAGE ISOLATED CIRCUITS TO THE INPUT AND OUTPUT
CONNECTORS. IF ANY QUESTIONS REGARDING THIS ISSUE, PLEASE CONSULT QUALIFIED
SERVICE PERSONNEL.
•TO PREVENT SHOCK OR FIRE HAZARD DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. IF SUCH EXPOSURE OCCURS, REMOVE THE POWER CABLE FROM THE MAINS
OUTLET AND HAVE THE EXPOSED UNIT CHECKED BY QUALIFIED SERVICE PERSONNEL.
•DO NOT OPERATE THE EQUIPMENT IF IT APPEARS THAT IS NOT OPERATING NORMALLY, OR IF
IT IS DAMAGED IN ANY WAY. REMOVE THE POWER CABLE FROM THE MAINS OUTLET AND
CONSULT QUALIFIED SERVICE PERSONNEL.
•DO NOT REMOVE ANY FIXED COVERS UNLESS YOU ARE A QUALIFIED SERVICE PERSONNEL.
ALWAYS DISCONNECT THE POWER CABLE FROM THE MAINS OUTLET BEFORE ANY COVER IS
REMOVED.
•THIS EQUIPMENT CONTAINS NO USER SERVICEABLE PARTS. REFER ALL SERVICING AND
MAINTENANCE TO QUALIFIED SERVICE PERSONNEL.

Issue 1.0 HQPro1000 User’s Guide
12
1Introduction
This manual explains how to operate your HQPro1000 Scaler-Switcher. If you have any questions
relating to this or any other Calibre product please visit our web site www.calibreuk.com.
1.1 System Overview
The new Calibre HQPro1000 scaler-switcher features 4K50/60Hz 4:4:4 image processing algorithms
that generate vivid, sharp and detailed images. The HQPro1000 also supports true seamless switching,
4K I/O interfaces, four layers and numerous other high-end processing features.
The HQPro1000 is a modular system composed of a base unit, two optional input cards and one
optional output card. The base unit includes two 4K HDMI 2.0 inputs, one 4K HDMI 2.0 output, and a
confidence monitor output. All outputs from the main output and the optional output card, are active
simultaneously. The confidence monitor displays in a quadrant configuration the two sources
connected to the unit via the main HDMI inputs and the sources selected by the two optional input
cards.
The first optional input card to be released is the General Input Module (GIM). The GIM card includes
three inputs: one HDMI 2.0, one Display Port 1.2 and a 3G-SDI input. The first optional output card to
be released is the Quad Output Module (QOM). The QOM card has 4 HDMI 1.4 outputs that allow the
user to slice the main 4K output into four segments. Each segment can be of any size according to the
application requirement.
The main unit also includes a genlock input connector with loop through, allowing the output frame to
lock to an externally provided synchronization signal. Alternatively, the output frame rate can also lock
to the input frame rate dynamically without frame rate conversion to reduce system latency; or it can
be set to a fixed output frame rate.
If an HDCP encrypted signal is connected to the unit, then the output signals will also be HDCP
encrypted. HDCP capability can be switched off per input, so that a source can transmit non-protected
content material.
The LED sizing menu allows users to easily and quickly define the area within the output raster where
the scaled image will be placed. This area is defined to match exactly the size of the LED wall. The image
can be reduced to an area as small as 128x96 pixels.
All units can be operated via the front panel, through a built-in web page, or via an API interface. The
API commands are presented as an appendix at the end of this manual.

Issue 1.0 HQPro1000 User’s Guide
13
1.2 Unit Setup
Inspect the shipping box and make sure that no damage was caused during transportation. If you
see any damage, immediately contact the shipping carrier. Remove the unit and ensure that there
is no damage caused during shipping.
STEP 1: Verify that the following items are included with the unit:
•3 pin plug IEC mains cable
•Quick Start Guide (QSG)
STEP 2: Install the unit on a clean flat surface or on an equipment rack
using the rack-mount ears. The unit should always be installed in a well ventilated, static free
environment and close to the AC power source. Max. operating temperature is 00C to 400C and 5% to
95% non-condensing humidity.
STEP 3: Connect the display device (Monitor, LED Wall, Projector, etc.) to the HDMI output connector.
STEP 4: Connect a monitor to the Confidence monitor output
STEP 5: Connect the Input sources (Blu-Ray Player, Set Top Box, PC, etc.).
STEP 6: Insert the power cord and power-up the unit. The boot-up process takes about one minute.

Issue 1.0 HQPro1000 User’s Guide
14
2Unit Description
2.1 Front Panel Layout
The front panel buttons allow users to select between the different inputs, provide direct access to
important functions and allow for the menu navigation to setup and control the unit.
Figure 1: HQPro1000 Front Panel
A: LCD Display
Displays the system menus in a multi-line colour display and a layer wireframe illustration.
B: Layer keys
Layer 1 through 4: These keys select the corresponding layer
C: PRV (Preset Preview)
Enables the layer wireframe representation allowing users to preview the selected preset
D: Jog wheel
The wheel is used for navigating through the menu system and making value changes. The jog wheel
has a push function that creates the same effect as pushing the Menu/Sel key.
E: Menu navigational keys:
•Menu/Sel key acts as an Enter or Select key for menu changes.
•Esc To exit the menu or any submenu
F: Input keys
All input channels are directly selected with these buttons.
•First Row: 2xHDMI-1 & 2 (UHD/4k) inputs, LOGO, Test Pattern
•Second Row: Optional Card 1: Inputs 1 through 4
•Third Row: Optional Card 2: Inputs 1 through 4
G: Function keys
These keys provide direct access (shortcuts) to several important functions and menus.
•LED Setup: Shortcut to the LED sizing menu
•Freeze: Freezes the selected layer. Pressing the button again, deactivates the action and
resumes the live output.
•AOI (Input Area-of-Interest): Shortcut to the input AOI menu. Also activates or deactivates the
feature.
•Black: Sets the whole output to black. Pressing the button again, deactivates the action and
enables the live output to reappear.

Issue 1.0 HQPro1000 User’s Guide
15
H: Preset keys
These keys provide direct access to preset
•10 Preset Keys
•Preset Store and Clear Keys
2.1.1 Front Panel Shortcuts:
ESC + Preset 1: Keypad Lock
ESC + Preset 2: Keypad Unlock
ESC + Preset 3: Firmware Rev. no.
ESC + Preset 4: Network Settings
Note: First press and hold the Esc button and then press the second button.
Table 1: Input and Outputs
Base Unit
Optional
HQPro1000 Main Unit
•HDMI 4K 2.0 Inputs
•HDMI 4K 2.0 Outputs
•HDMI 2K 1.4 Confidence Monitor Output
•Ext. Genlock Input and Loop through
2
1
1
1
General Input Module (GIM)
•HDMI 4K 2.0 Input
•DisplayPort 4K 1.2 Input
•3G-SDI Input
1
1
1
Quad Output Module (QOM)
•HDMI 2K 1.2 Output
4
Note: 4K50/60 HDMI 2.0 & DP 1.2 Inputs and Outputs support resolutions up-to 4096x2160 4:4:4 RGB.

Issue 1.0 HQPro1000 User’s Guide
16
2.1.2 Button behaviour tables
2.1.2.1 Presets 1 thru 10
LED Colour: White
Brightness
Flashing Speed
Behaviour
Dark
N/A
No Preset is stored
Half Lit
Solid
A valid preset is stored, but not on screen
Fully Lit
Fast
A valid preset is stored, and has been cued
to be executed after TAKE
Slow
A preset has been selected, but a conflict
has been detected with existing layout or
Nothing is stored in the preset
Solid
The preset is on screen
2.1.2.2 Preset Preview (PRV)
LED Colour: White
Brightness
Flashing Speed
Behaviour
Dark
N/A
Function is inactive
Fully Lit
Solid
•Activated immediately as soon as the
button is pressed
•Function stays active until the button
is pressed again
2.1.2.3 Test Pattern (TP), Black (BLK)
LED Colour: Red
Brightness
Flashing Speed
Behaviour
Dark
N/A
Functions are inactive
Fully Lit
Solid
•Activated immediately across the
whole output screen as soon as the
button is pressed.
•Pressing these buttons has an
immediate effect. TRANS or CUT
buttons are not needed to be pressed
for these functions to be activated
•Function stays active until the button
is pressed again
2.1.2.4 FREEZE (FRZ)
LED Colour: White
Brightness
Flashing Speed
Behaviour
Dark
N/A
Function is inactive
Half Lit
Solid
Selected layer is frozen, but is not on
screen

Issue 1.0 HQPro1000 User’s Guide
17
Fully Lit
Solid
•If a layer button is pressed prior to
pressing the FRZ button, then the
corresponding layer will be frozen
•If no layer button is pressed prior to
pressing the FRZ button, then all layers
will be frozen
•Pressing FRZ has an immediate effect.
TRANS or CUT buttons are not needed
to be pressed for this function to be
activated
•Function stays active until the button
is pressed again
2.1.2.5 Area of Interest (AOI)
LED Colour: White
Brightness
Flashing Speed
Behaviour
Dark
N/A
•Selected input doesn’t have modified
AOI settings. Default settings are
applied
Half Lit
Solid
•The Selected input has modified AOI
settings, but currently are not applied
Fully Lit
Solid
•Selected input has modified AOI
settings, and are applied
•Pressing AOI has an immediate effect.
TRANS or CUT buttons are not needed
to be pressed for this function to be
activated
2.1.2.6 Layers 1 thru 4
LED Colour: Red/Blue
Brightness
Flashing Speed
Color
Behaviour
Dark
N/A
N/A
•Layer not on screen
Half Lit
Solid
Blue
•Layer is selected and in
the edit mode
Fully Lit
Solid
Red
•Layer is selected.
2.1.2.7 HDMI1, HDMI2 & Input Module (Card) Inputs
LED Colour: Red/Green
Brightness
Flashing Speed
Color
Behaviour
Dark
N/A
N/A
No valid signal has been
detected
Half Lit
Solid
Green
A valid signal has been detected,
but it is not on screen
Fully Lit
Fast
Green
A valid source has been cued to
go on screen

Issue 1.0 HQPro1000 User’s Guide
18
Slow
Green
A valid source hasn’t been
detected, but the input is cued
to go on screen
Slow
Red
An invalid input is on screen
Solid
Red
A valid input is on screen
2.1.2.8 LOGO
LED Colour: Red/Green
Brightness
Flashing Speed
Color
Behaviour
Dark
N/A
N/A
No LOGO is stored
Half Lit
Solid
Green
A LOGO is stored, but it is not on
screen
Fully Lit
Fast
Green
LOGO has been cued to go on
screen
Slow
Green
A LOGO is not stored, but it is
cued to go on screen
Slow
Red
LOGO is on screen, but its black
because there is no image is
stored
Solid
Red
LOGO is on screen
Other Buttons
•ESC
•Sel
•LED Size
•(Layer size)
•Store (Preset)
•Erase (Preset)
•Next (Preset)
•Toggle (Preset)
LED Colour: White
Brightness
Flashing Speed
Behaviour
Dark
N/A
The buttons are not pressed
Fully Lit
Solid
The button is pressed. Button
goes dark, as soon as it is
depressed.

Issue 1.0 HQPro1000 User’s Guide
19
2.2 Rear Panel Layout
The rear panel features all input and output connectors, genlock connectors, communication ports,
power supply connector with switch and the input and output optional slots.
Figure 2: HQPro1000 Rear Panel
A: Communication Ports
These keys provide direct access to preset
•TCP/IP
•USB
•RS232 port
B: Input Connectors: 2x HDMI 4K50/60Hz 4:4:4
C: Main Output Connector: 2x HDMI 4K50/60Hz 4:4:4
D: Confidence Output Monitor Connector: 1x HDMI 2K50/60Hz 4:4:4
E: Genlock input (BNC) with loop through
F: Optional Output Card slot
G: Optional Input Card slots
H: Power supply connector with switch

Issue 1.0 HQPro1000 User’s Guide
20
3Main Unit Product Specification
This section provides technical specification for all models. The following topics are discussed:
•Power Supply Requirements
•Input Specifications
•Output Specifications
•Analog Audio
•Supported Formats
•Communication Specifications
3.1.1 Power Supply Requirement
100V-264VAC 50/60Hz connected via a standard IEC connector located on the rear panel.
3.2 Input Specifications
3.2.1 4K HDMI
•HDMI with or without HDCP, 36-bit video compatible.
•DVI-D input with or without HDCP
•Signal formats - video
oSD: 625i (576i) and 525i (480i) in double-rate formats;
oED: 480p, 576p;
oHD: 1280x720p, 1920x1080i, 1920x1080psf; 1920x1080p 23.97, 24, 25, 29.94, 30, 50,
59.94 & 60Hz; 2048x1080p 23.97, 24, 25, 29.94, 30, 50, 59.94 & 60Hz.
•Signal formats –computer
oCommon VESA graphics formats from VGA up-to 4K including 2560x1440p,
2560x1600p, 3840x2160p & 4096x2160p @ 23.97, 24, 25, 29.94, 30, 50, 59.94 & 60Hz
at 4:4:4 colour space format
3.2.2 4K DP Input (General Input Module Only)
•Display Port without HDCP, 36-bit video compatible.
•Signal formats as HDMI 1 and HDMI 2.
3.2.3 3G-SDI Input (General Input Module Only)
•Format: SD-SDI, HD-SDI and 3G-SDI YCbCr 4:2:2 serial digital component video.
•Level B support.
When input is 3G Level B (2 stream mapping), there is an option to select which of the two video
streams (Stream 1 or 2) to use. Otherwise it works with whatever mapping is specified in the
SMPTE 352 packet (or defaults to 10bit 4:2:2 if none).
•Input impedance: 75 ohms.
•SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant, accepts 484i, 576i, 720, 1080i and
1080p single link formats at 270Mb, 1.485Gb or 2.97Gb rates.
3.2.4 Genlock Input with Loop through
The Genlock input supports the following signals:
•NTSC and PAL Blackburst
•HD tri-level sync, per SMPTE 274M & 296M.
Other manuals for HQPro1000
1
Table of contents
Other Calibre Switch manuals