California Air Tools 20060DCC User manual

ULTRA QUIET & OIL FREE
AIR COMPRESSOR
OWNER'S MANUAL
CALIFORNIA AIR TOOLS
20060DCC
6.0 HP
20 GALLON
220 VOLTS 60 HERTZ
ULTRA-QUIET AIR COMPRESSOR
98% DRYAIR SYSTEM
WWW.CALIFORNIAAIRTOOLS.COM Customer Support 1-866-409-4581

2 Customer Support: 1-866-409-4581
AIR COMPRESSOR
TABLE OF CONTENTS
INTRODUCTION __________________________________2
IMPORTANT SAFETY INSTRUCTIONS _______________5
AIR COMPRESSOR COMPONENTS__________________7
PRE-OPERATION CHECKLIST ______________________8
Package Contents & Assembly____________________8
Inspect for Damage _____________________________8
Save Packaging ________________________________8
Compressor Location ___________________________8
Electrical Power ________________________________9
OPERATING THE AIR COMPRESSOR ________________9
Introduction ___________________________________9
Assembly _____________________________________9
Test Run _____________________________________10
Daily Operation________________________________10
MAINTENANCE _________________________________11
Draining the Air Tank ___________________________11
Changing the Air Filter__________________________11
Testing for Leaks ______________________________11
Cleaning _____________________________________11
STORAGE ______________________________________11
TROUBLESHOOTING ____________________________12
SPECIFICATIONS________________________________13
Electrical Circuit _______________________________13
Air Passage Drawing ___________________________13
WARRANTY ____________________________________14
INTRODUCTION
Thank you for purchasing a California Air Tools, Inc.
Air Compressor.
Record the model and serial numbers indicated on your
air compressor’s nameplate:
Model No. ________________________________________
Serial No. ________________________________________
Date of Purchase: _________________________________
Store/Dealer: _____________________________________

3
Customer Support: 1-866-409-4581
AIR COMPRESSOR
How to find a local service center:
Even quality built equipment might need service or repair parts.
Contact the California Air Tools Customer Service Department:
Phone: [phone]
Online: WWW.CALIFORNIAAIRTOOLS.COM
Please provide the information below:
Model number and Serial number and specifications shown on the
Model number/Serial number plate.
Part number or numbers shown in the parts list section of the
owner’s manual for your air compressor model.
A brief description of the trouble with the air compressor.
Do not return your air compressor for service or parts to the
store/dealer where purchased.
IMPORTANT SAFETY
INSTRUCTIONS
Safety Messages & Signal Words:
DANGER
DANGER
There is a danger of electric shock.
There is a danger of electric shock.
Use only undamaged electrical cords.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in wet
DO NOT operate air compressor in wet weather or in wet
conditions.
conditions.
DO NOT touch air compressor or cords if hands or feet are
DO NOT touch air compressor or cords if hands or feet are
wet.
wet.
Ensure that all cords are free of damage before connecting
Ensure that all cords are free of damage before connecting
to the power supply.
to the power supply.
Ensure that you have a sucient electrical supply for
Ensure that you have a sucient electrical supply for
supporting the requirements of the motor.
supporting the requirements of the motor.
Improper installation of the grounding plug is able to result
Improper installation of the grounding plug is able to result
in a risk of electric shock. When repair or replacement of the
in a risk of electric shock. When repair or replacement of the
cord or plug is required, do not connect the grounding wire
cord or plug is required, do not connect the grounding wire
to either at terminal. The wire with insulation having an
to either at terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is
outer surface that is green with or without yellow stripes is
the grounding wire.
the grounding wire.
This product must be grounded. In the event of an electrical
This product must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electrical shock
short circuit, grounding reduces the risk of electrical shock
by providing an escape wire for the electric current.
by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be
wire with an appropriate grounding plug. The plug must be
plugged into an outlet that is properly installed and
plugged into an outlet that is properly installed and
grounded in accordance with the local codes and
grounded in accordance with the local codes and
ordinances.
ordinances.
This product is for use on a nominal 220-V circuit and has a
This product is for use on a nominal 220-V circuit and has a
grounding plug similar to the plug illustrated in sketch A.
grounding plug similar to the plug illustrated in sketch A.
Only connect the product to an outlet having the same
Only connect the product to an outlet having the same
conguration as the plug.
conguration as the plug.
Do not use an adapter with this product.
Do not use an adapter with this product.
SHOCK
SHOCK

4 Customer Support: 1-866-409-4581
AIR COMPRESSOR
Dust or dust-like particulates caused by
power-sanding, sawing, grinding, drilling or any
other construction-like activities can contain
contaminants that are harmful to breathe.
Always use your air compressor in a well-ventilated
and clean area.
Never breathe the air that comes directly out of the
air compressor or air hose. This air is not suitable for
breathing.
Always wear approved safety equipment. When
performing dust-creating activities, securely wear
properly-fit face masks or respirators.
If you feel ill from breathing while operating your air
compressor, stop and seek medical attention
immediately.
WARNING
RISK TO BREATHING
Air compressor surfaces become hot during
operation.
DO NOT touch hot surfaces, because they can cause
severe burns.
Do not touch the air compressor’s cylinder head.
During operation, the cooling fins of the cylinder
head and delivery pipe become hot.
Allow the air compressor to cool before touching it.
DO NOT place a storage cover on the unit during
operation. Only place a cover on the air compressor
after it has thoroughly cooled down.
FIRE
HOT SURFACE
WARNING
Flying objects can cause injury to the eyes, head and
other parts of the body.
Air-powered equipment and power tools are capable
of propelling items (metal chips, fasteners and
particulates) at high speed into the air and could
result in injury.
Always wear approved head and eye protection.
Never point the air stream at any part of your body,
or at another person or animal.
When operating the air compressor, make sure all
other people and animals maintain a safe distance.
Do not move the air compressor when the air tank is
under pressure.
Never use the air hoses to pull or move the air
compressor.
Keep the air compressor on a flat surface.
WARNING
FLYING OBJECTS
Exercise caution when using pressurized air.
To prevent injury and for your general safety, only
use high-pressure hoses, fittings and couplings
designed for use with air compressors.
Inspect all hoses, fittings and couplings for leaks
and wear. When leaks and wear are detected, stop
use and replace those items immediately. Do not
repair.
Never leave pressurized air in the air tank when
performing maintenance.
Never leave the air compressor unattended with the
power supply in use and the air hose connected.
WARNING
EXPLOSION

5
Customer Support: 1-866-409-4581
AIR COMPRESSOR
Improper care could lead to the air tank bursting or
exploding.
Drain air tank daily or after each use to prevent
moisture buildup in the air tank.
Rust can weaken the air tank and cause leaks or
bursting. If rust is detected, replace tank
immediately. Do not try to repair the air tank by
welding, drilling or modifying it in any other way.
These modifications can weaken the air tank and
cause a hazardous condition.
If air tank develops a leak, replace the air tank
immediately. Never repair, weld or make
modifications to the air tank or its attachments.
Never make adjustments to the factory-set
pressures.
Never exceed manufacturer's maximum-allowable
pressure rating attachments.
Because of extreme heat, do not use plastic pipe or
lead tin solder joints for a discharge line.
WARNING
EXPLOSION
Use caution to minimize risk of fire or explosion.
It is normal for the air compressor motor and
pressure switch to produce sparks while operating. If
sparks come in contact with vapors from gasoline or
solvents, they may ignite and cause a fire or
explosion.
Abrasive tools such as grinders, drills and other
tools are capable of making sparks that can ignite
flammable materials.
Always operate the air compressor a safe distance
away from flammable items. Use in well-ventilated
areas.
Never exceed the maximum rated pressure.
FIRE
WARNING
EXPLOSION

6 Customer Support: 1-866-409-4581
LOCATIONS OF
IMPORTANT LABELS
Read these important labels before operating.
These labels provide important safety and maintenance
information. These labels should be considered as permanent
parts of the air compressor. Should any of these labels become
illegible, damaged or removed, please contact California Air Tools
Customer Service department at 1-866-409-4581 for
replacements.
PRODUCT LABEL
A
B
C
D
E
F
G
H
AIR COMPRESSOR

7
Customer Support: 1-866-409-4581
AIR COMPRESSOR

8 Customer Support: 1-866-409-4581
PRE-OPERATION CHECKLIST
Package Contents
Model: 20060DCC
Package contents:
* Air Compressor
* Owner's Manual
Assembly:
Install the Air Filters.
1. Screw the six (6) air filters into the 6 ports located on
the top side of the motor heads.
Inspect for Damage
Before using the air compressor, make sure the air tank is not
damaged, inspect all parts for damage, and check that all pipes
are firmly connected.
Do not use the air compressor if any damage is found. If
damaged, have an authorized service center inspect and test the
air compressor to ensure that is working properly.
Save Packaging
Save all outside packaging in case you ever need to return the
product for service or repair.
Compressor Location
Use on Flat Surface
For proper operation, the air compressor must be placed on a flat
surface with an incline no greater than 15 degrees.
Maintain a Clear Area
It is very important that the air compressor is positioned so that
there is adequate airflow around the machine. There must be at
least 2 feet of obstacle-free space surrounding and above the air
compressor.
Use in Areas with Clean Air
For proper operation and to maximize the longevity of the air
compressor, it is very important that the air drawn into the air
compressor is clean. The air compressor should not be used in
areas where dust or particulates are in the air. This will damage
the motor and impair proper operation.
IMPORTANT: Always use the air filter, properly installed.
Use caution to minimize risk of fire or explosion.
It is normal for the air compressor motor and
pressure switch to produce sparks while operating. If
sparks come in contact with vapors from gasoline or
solvents, they may ignite and cause a fire or
explosion.
Abrasive tools such as grinders, drills and other
tools are capable of making sparks that can ignite
flammable materials.
Always operate the air compressor a safe distance
away from flammable items. Use in well-ventilated
areas.
Never exceed the maximum rated pressure.
FIRE
WARNING
EXPLOSION
Dust or dust-like particulates caused by
power-sanding, sawing, grinding, drilling or any
other construction-like activities can contain
contaminants that are harmful to breathe.
Always use your air compressor in a well-ventilated
and clean area.
Never breathe the air that comes directly out of the
air compressor or air hose. This air is not suitable for
breathing.
Always wear approved safety equipment. When
performing dust-creating activities, securely wear
properly-fit face masks or respirators.
If you feel ill from breathing while operating your air
compressor, stop and seek medical attention
immediately.
WARNING
RISK TO BREATHING
AIR COMPRESSOR

9
Customer Support: 1-866-409-4581
AIR COMPRESSOR
Electrical Power
Electrical Power Requirements
Before using the air compressor, refer to the serial label for
voltage and amperage requirements. Make sure you have a
sufficient electrical supply for supporting the motor's requirements.
Use a dedicated 220 Volt 60 Hertz, 1-Phase circuit only
208 Volts requires a buck boost transformer (i.e. 208 to 230)
Low voltage and/or an overload circuit can cause the motor's
overload protection system circuit breaker to trip.
NEMA L6-30R Outlet (receptacle) is required.
OPERATING THE AIR COMPRESSOR
Save this manual for future reference.
Introduction
This air compressor features a compact structure, stable,
performance, a high airflow rate, easy operation and low
maintenance. Because the air compressor produces no oil in the
airflow, it can be used for air supplies that need oil-free air. The
motor directly drives the pistons and does not need any
lubrication or oil to function for a long period of time.
Assembly
1. Attach the air hose to the 1/2” NPT Female Port located on the
right end of the air compressor air tank.
2. Install the (6) air filters into the 6 ports located on the top right
and left of the motor heads.
3. Make sure the manual drain valve is in the off position and that
the air compressor power switch is in the OFF position
4. Ensure that the power supply you are going to use is operating
normally. Use dedicated (220 Volts, 60 Hertz, 1-Phase) outlet.
5. A 30 Amp breaker minimum is suggested.
208 Volts requires a buck boost transformer (i.e. 208 to 230)
6. Insert the power supply cord into a NEMA L6-30R (receptacle)
NOTE: Extension cords are not recommended.
Optional Regulator (1/2” NPT)
An optional Regulator/Filter (1/2” NPT) with Micro Mist Separator
is available from California Air Tools. Contact California Air Tools:
1-866-409-4581
DANGER
DANGER
There is a danger of electric shock.
There is a danger of electric shock.
Use only undamaged electrical cords.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in wet
DO NOT operate air compressor in wet weather or in wet
conditions.
conditions.
DO NOT touch air compressor or cords if hands or feet are
DO NOT touch air compressor or cords if hands or feet are
wet.
wet.
Ensure that all cords are free of damage before connecting
Ensure that all cords are free of damage before connecting
to the power supply.
to the power supply.
Ensure that you have a sucient electrical supply for
Ensure that you have a sucient electrical supply for
supporting the requirements of the motor.
supporting the requirements of the motor.
Improper installation of the grounding plug is able to result
Improper installation of the grounding plug is able to result
in a risk of electric shock. When repair or replacement of the
in a risk of electric shock. When repair or replacement of the
cord or plug is required, do not connect the grounding wire
cord or plug is required, do not connect the grounding wire
to either at terminal. The wire with insulation having an
to either at terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is
outer surface that is green with or without yellow stripes is
the grounding wire.
the grounding wire.
This product must be grounded. In the event of an electrical
This product must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electrical shock
short circuit, grounding reduces the risk of electrical shock
by providing an escape wire for the electric current.
by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be
wire with an appropriate grounding plug. The plug must be
plugged into an outlet that is properly installed and
plugged into an outlet that is properly installed and
grounded in accordance with the local codes and
grounded in accordance with the local codes and
ordinances.
ordinances.
This product is for use on a nominal 220-V circuit and has a
This product is for use on a nominal 220-V circuit and has a
grounding plug similar to the plug illustrated in sketch A.
grounding plug similar to the plug illustrated in sketch A.
Only connect the product to an outlet having the same
Only connect the product to an outlet having the same
conguration as the plug.
conguration as the plug.
Do not use an adapter with this product.
Do not use an adapter with this product.
SHOCK
SHOCK

10 Customer Support: 1-866-409-4581
AIR COMPRESSOR
Test Run
Before using the air compressor for the first time, complete a test
run as follows:
1. Turn the power switch to the OFF position. Plug the power
supply cord into a power supply socket. Start the air
compressor by turning the power switch to the ON position.
The pressure gauge reading will slowly rise as pressure
increases inside the air tank. When the gauge reading reaches
120 -125 PSI, the pressure switch will automatically turn the
power off. This indicates the compressor is working normally.
2.
Daily Operation
Starting the compressor:
1. Turn the power switch to the OFF position.
2. Attach the air hose or air fitting to the Female 1/2” NPT port
located on the right end of the air compressor air tank.
3. Close the manual drain valve.
4. Plug the power supply cord into a power supply socket.
5. Turn the power switch to the ON position.
6. Let the motor run and tank fill until motor turns off.
7. Operate air tool normally.
8. To regulate the air to the air hose. have the air compressor
and air tool both turned on and running. Turn the regulator
knob to the right to increase the pressure and to left to
decrease the air pressure to the hose and air tool..
Do not use continously (running) for more than (1) hour.
Shutting down the compressor:
1. Turn the power switch to the OFF position.
2. Unplug the power supply cord.
3. Reduce the pressure in the air tank through the air hose.
4. Draining the air tank regulatorly from the manual drain valve
will help prevent corrosion in the air tank.
Air compressor surfaces become hot during
operation.
DO NOT touch hot surfaces, because they can cause
severe burns.
Do not touch the air compressor’s cylinder head.
During operation, the cooling fins of the cylinder
head and delivery pipe become hot.
Allow the air compressor to cool before touching it.
DO NOT place a storage cover on the unit during
operation. Only place a cover on the air compressor
after it has thoroughly cooled down.
FIRE
HOT SURFACE
WARNING
Flying objects can cause injury to the eyes, head and
other parts of the body.
Air-powered equipment and power tools are capable
of propelling items (metal chips, fasteners and
particulates) at high speed into the air and could
result in injury.
Always wear approved head and eye protection.
Never point the air stream at any part of your body,
or at another person or animal.
When operating the air compressor, make sure all
other people and animals maintain a safe distance.
Do not move the air compressor when the air tank is
under pressure.
Never use the air hoses to pull or move the air
compressor.
Keep the air compressor on a flat surface.
WARNING
FLYING OBJECTS
Note: If the Air Compressor is not working properly, the
pressure gauge will indicate that there is a decrease in
pressure in the air tank. If there is an air leak from the
compressor the pressure in the air tank decreases, the
pressure switch resets and the motor automatically turns
back on.
If you detect an air leakage, turn the power switch to the
Off position, release the air from the tank by pulling on
the safety valve. Unplug the power supply cord and contact
Customer Support for Assistance.
Turn the power switch to the Off position, unplug the power
supply cord and release the air from the manual drain valve.
At this point proceed to the next step (daily operations)
starting the air compressor to continue to use.

11
Customer Support: 1-866-409-4581
AIR COMPRESSOR
MAINTENANCE
Draining the Air Tank
The frequency at which you should drain the air tank depends on
the environmental conditions and the amount of operating time
logged.
Your air compressor is equipped with an EZ-1 Auto Drain Valve
that automatically drains the air tank.
1. Place the drain tube from the auto drain valve into a waste
container capable of holding water.
2. The Auto Drain Valve will open at the beginning of a cycle to
drain the water out of the air tank.
3. Empty the waste container of water regularly.
4. Highly recommended to manually drain the air tank
regularly (Daily) from the ball drain valve to remove excess
water.
5. Draining the air tank protects parts from rust and corrosion.
Changing the Air Filter
The air filters are designed to reduce noise and help prevent
particulates in the air from entering and damaging the air
compressor.
After being used for a period of time, the air filter will become
clogged. This will reduce the air intake capabilities of the air
compressor, reducing performance. Therefore, the air filter must
be replaced regularly.
1. Open the lid of the air filter and remove the old air filter
element.
2. Replace with a new air filter element and close the lid.
Testing for Leaks
Make sure all connections are tight. Do not overtighten.
A small leak in any hose or pipe connection will reduce the air
compressor's performance.
To test for small leaks, spray a small amount of soapy water on
the area suspected of leaking. If the soap bubbles, replace the
broken part.
Cleaning
Clean items with a soft brush, or wipe with a moistened cloth
using a biodegradable solvent.
Do not use flammable liquids such as gasoline or alcohol. Always
keep parts clean from dirt and dust for better performance.
AIR DRYER CANISTERS
This air compressor includes a 98% air drying system.
* Aftercoolers (Condensers)
* Air Drying Canisters (2) - Ultra Dry Service Kit
The air drying process is performed when the air flow from the air
compressor is pushed through air dryer canister containing
desiccant material (molecular Sieve). The desiccant captures and
removes the moisture from the air.
After 2 years of use the Canister desiccant needs to be replaced.
Unscrew the old canisters counter-clockwise and discard the old
desiccant canisters (spare part is referred to as the Ultra Dry
Service Kit)
STORAGE
Before storing for a prolonged period of time:
1. Turn off the power supply.
2. Disconnect the power cord from the power supply.
3. Release all of the pressure and moisture from the air tank
through the manual drain valve.
4. Clean the air compressor to remove all dirt and dust.
5. Cover the air compressor with a cover to protect the unit from
dust and moisture.
6. Do not stack or store any items on top of or around the air
compressor. Damage could occur.

12 Customer Support: 1-866-409-4581
AIR COMPRESSOR
TROUBLESHOOTING
WWW.CALIFORNIAAIRTOOLS.COM
Go to the “Maintenance & Trouble Shooting Guide” Tab
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS
Pressure drop in the tank. Air leaks at connections.
Let the compressor build pressure in the tank, to
the maximum pressure if possible. Brush soapy
water on air connections and look carefully for air
bubbles. Tighten leaky connections.
The unloader valve leaks when
the compressor is idle. Unloader valve spring compressed.
Let the air in the tank flow out until all the pressure
is released. Then remove the unloader valve plug
and clean the valve spring and elongate. If
necessary, replace the spring and then reinstall all
components.
The compressor stopped and
does not start.
Overload cutout operated because of
motor overheating.
Check that the main voltage corresponds to
specifications. An extension cord that is too thin or
too long can cause a voltage drop and cause the
motor to overheat. Allow the motor to cool down.
Press the Reset Button to restart the air
compressor Ensure that the compressor is plugged
into a socket as close as possible to the consumer
unit or fuse box.
Motor windings are burned out. Contact Customer Support.
The motor does not start and
makes a humming noise. Capacitor is burned out. Replace capacitor.
The motor does not start or starts
slowly. Low voltage supply to the motor.
Check that the main voltage corresponds to
specifications. An extension cord that is too thin or
too long can cause a voltage drop and cause the
motor to overheat. Allow the motor to cool down.
Ensure that the compressor is plugged into a
socket as close as possible to the unit or fuse box.
The compressor is noisy with
metallic clangs.
Compressor head gasket broken or
valve faulty. Stop the compressor and contact service center
The compressor does not reach
the maximum pressure.
Compressor head gasket broken or
valve faulty. Stop the compressor and contact service center
The compressor doesn't seem to
provide as much air as it did
when new and/or the compressor
cuts off within a much shorter
time period.
The pressure switch needs adjusting. Stop the compressor and contact service center
The tank is full of water due to
condensation.
Open the ball valve and release the pressure.
Open the drain valve and release the water within
the tank.
The motor pump unit does not
stop when the tank pressure
reaches its maximum working
pressure and the safety valve
vents air.
Pressure switch defective or needs
adjusting.
Stop the compressor immediately and contact
Customer Support.

13
Customer Support: 1-866-409-4581
SPECIFICATIONS
Electrical Circuit
Air Passage Drawing
AIR COMPRESSOR
Motor
Earth wire
(Green)
Red cords for
Capacitor
Electric cord
for motor
Solenoid
valve
Electric cord
for motor
Pressure
switch
Overload protector
(MAX temperature 135°C)
Pressure switch Safety valve
Pressure gauge
Regulator Pressure gauge
Ball valve
Filter
Drain valve
Air intake
Check valve
Solenoid
valve
Compressor Tank

14 Customer Support: 1-866-409-4581
AIR COMPRESSOR
CALIFORNIA AIR TOOLS INC. LIMITED WARRANTY
This warranty is limited to Air Compressors distributed by:
California Air Tools, Inc.
8560 Siempre Viva Road
San Diego, CA 92154
Limited Warranty
California Air Tools Inc. will repair or replace, free of charge, to the original retail customer who purchased a California Air Tools, Inc.
Air Compressor from an authorized dealer, distributor or distributor’s dealer in North America.
This warranty does not transfer to subsequent owners.
California Air Tools Inc. will repair or replace, at its option, any parts of the portable air compressor that are proven by an authorized
service center to be defective in material or workmanship under normal use during the applicable warranty time period as stated below.
This limited warranty covers the cost of the replacement parts and labor for all defects when installed by an authorized service center.
Transportation charges are the responsibility of the customer. Any part replaced under warranty becomes the property of California Air
Tools Inc.
All parts replaced under warranty will be considered as part of original product, and any warranty on those parts will expire coincident with
the original product warranty.
Limited Warranty Periods
Non-commercial / Non-rental (personal use by a retail customer): 12 months parts and labor
Commercial / Rental (usage for income, business use): 12 months parts and labor
The limited warranty period begins on the date of retail purchase by the original purchaser.
Invoice or receipt is required for warranty claims.
Disclaimers, Limitations of Remedies & Exclusions
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Disclaimer of Other Warranties
To the fullest extent permitted by applicable law, this limited warranty is exclusive and expressly in lieu of any and all other warranties,
including, without limitation, any implied warranties of merchantability or fitness for a particular purpose or any other implied warranties
that may arise from the course of dealing or usage of the trade. California Air Tools Inc. hereby declaims and excludes all other
warranties. To the extent that California Air Tools Inc. products are consumer products under applicable federal and state law with respect
to any customer, the duration of any implied warranties (including but not limited to implied warranties of merchantability or fitness for a
particular purpose) are limited to the shortest duration permitted by applicable law or the Limited Warranty period provided herein,
whichever is longer.
Limitations of Remedies
California Air Tools Inc. shall not be liable to customer, or anyone claiming under customer, for any other obligations or liabilities, including
but not limited to, obligations or liabilities airing out of breach of contract or warranty, negligence or other tort or any theory of strict liability,
with respect to the air compressor or California Air Tools Inc. acts or omissions or otherwise. To the fullest extent permitted by applicable
law, California Air Tools Inc. shall not in any event be liable for incidental, compensatory, punitive, consequential, indirect, special or other
damages, including but not limited to loss of use, loss of income, loss of time, loss of sales, injury to personal property, or liability
customer incurs with respect to any other person, or any other type or form of consequential damage or economic loss.

15
Customer Support: 1-866-409-4581
AIR COMPRESSOR
Exclusions
In addition to the foregoing disclaimers, limitations and terms, this limited warranty shall not apply to and does not cover accessories, nor
does it cover products that are in any way subject to any of the following:
1. Improper setup, installation or storage.
2. Lack of proper maintenance and service.
3. Accident, damage, abuse or misuse.
4. Abnormal operating conditions or applications.
5. Repair or modification by customer or any third party without written consent of California Air Tools Inc.
6. Use under operating conditions or in applications not recommended by California Air Tools Inc.
7. Abnormal wear.
8. The use of accessories or attachments not recommended by California Air Tools Inc.
9. Repairs without California Air Tools prior written approval
10. Incorrect voltage, improperly wired or failure to have a certified licensed electrician install the air compressor.
11. Acts of God.
The application of these exclusions will be determined at the sole discretion of California Air Tools Inc.
Registration
Warranty registration with California Air Tools Inc. is required on all products.
You can mail the enclosed registration form or complete on-line at www.californiaairtools.com under the “Contact Us” Tab.
Warranty is also available by keeping and showing your original receipt from the date of purchase to an Authorized California Air Tools
Service Center.
Maintenance & Trouble Shooting
WWW.CALIFORNIAAIRTOOLS.COM
Go to the “Maintenance & Trouble Shooting Guide” Tab
Service
Do not return your air compressor to the place of purchase.
Warranty is available by showing your original receipt with the date of purchase to an Authorized California Air Tools Service Center.
For all customer service inquiries.
Contact California Air Tools Customer Service
1-866-409-4581 M - Th (8am - 4pm) Fri (8an-2pm) Pacific Time
[email protected]
WWW.CALIFORNIAAIRTOOLS.COM
Go to the “Contact Us” Tab
Click on the Parts or Service Tab for faster service.