Caltrend JP175 User manual

I n s t a l l a t i o n
I n s t r u c t i o n s
2 1 2 1 S o u t h A n n e S t r e e t
S a n t a A n a , C A 9 2 7 0 4
800- 8 4 6 - 8621
F o r G e n e r a l I n f o r m a t i o n
o r W a r r a n t y c o n t a c t :
s u p p o r t @ c a l t r e n d . c o m
Part#JP175
Row: Front Buckets
Application Available for: Jeep Compass 2010-2017
Parts included:
Backrests-2 Headrest-2
Bottom Cushion-2

Part#: JP175 Front Buckets
Step #1- Prepare Seats
Remove headrest from mounts and
set them aside.
Step #2-Install Backrest
Step #3 Install Backrest
Step#4- Install Cushion
Step#5- Install Cushions
Step#6- Install Headrest
Place the cover over the headrest, matching its
contours,and cutouts. Then secure the fit with
the velcro.
Step#7-Finishing Touch
**Enjoy your CalTrend Seat
Covers***
***In case of dirty or stained
covers hand wash with mild
detergent and air dry. NEVER
MACHINE WASH OR DRY. The
material may come apart from
lamination or foaming. This
will also void any
warranty.***
Pull the velcro through the back, and secure
the backrest by attaching the velcros together.
Also tuck in the top piece of the backrest,
sending the velcro to the back. Then secure it
by attaching the velcros under the cover.
Place the cover onto the cushion,
matching its contours, and cutouts.
Then tuck in the top piece of the cover,
sending the buckles to the back.
Buckle the straps accordingly, make sure
to pull the straps tightly, so the cover is
well fitted. Also tuck in all sides of the
cushion.
Place the cover over
the cushion,
matching its
contours, and
cutouts. Tuck in the
bottom piece of the
cover, sending the
velcro to the back.
Make sure the
lumbar is well
fitted. ( located on
the side of the
backrest)
Once all covers
have been
installed adjust
the seating and
headrests to their
regular position.
Tuck all straps
underneath the
seating. Now you
are ready to enjoy
your CalTrend
Seat Covers 