Caltta ZXIMCU PT01 P200 User manual

ZXIMCU PT01 P200 Portable
Emergency Command System
Operation Manual

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page I
Version update instruction
Version
Date
Author
Auditor
Remark
1.0
2021-01-19
Caltta Technologies Co.,Ltd.
Address
12F, Building G2, International E-City, Nanshan, Shenzhen,
Zip code
518052
Website
http://www.caltta.com
Email
[e-mail]
Telephone
[phone]
©2021 Copyright Caltta Technologies Co.,Ltd. All rights reserved
Copyright statement:
The copyright of this document belongs to Caltta Technologies Co.,Ltd. Text contains proprietary information owned by
Caltta Technologies Co.,Ltd., without the written permission of Caltta Technologies Co.,Ltd., any unit or individual shall not
use or leak any document and Figures, this document contains tables, Figure, data and other information.
The information in this document contains the development progress of Caltta Technologies Co.,Ltd. products and
technology will continue to update, Caltta Technologies Co.,Ltd. would not notice such information updates.
Privacy Policy:
Caltta Technologies Co.,Ltd. is a global leader in trunking communications and information technology, the company has
committed to complying with appropriate regulations to personal data security. In order to protect it, a lot of essential security
technical measures should be taken such as anonymous, data encryption.

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page II
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
INDEX
1 OVERVIEW.................................................................................................................................................1
2 ZXIMCU PT01 P200 VERSION 3.0....................................................................................................... 1
2.1 INTRODUCTION OF ZXIMCU PT01 P200 VERSION 3.0..................................................... 1
2.2 ZXIMCU PT01 P200 CONNECTION OPERATION.................................................................4
3 NETWORK ARCHITECTURE INTRODUCTION................................................................................ 7
4 DISPATCHING PC CONFIGURATION.................................................................................................8
4.1 IP ADDRESS SETTING................................................................................................................8
4.2 IE 11 BROWSER SETTING.........................................................................................................9
5 TRUNKING SERVICES OPERATIONS............................................................................................. 10
5.1 OPERATIONS OF DAS UNIFIED DISPATCH CONSOLE.................................................. 10
5.1.1 DISPATCH CONSOLE INSTALLATION................................................................... 10
5.1.2 DISPATCH CONSOLE LOGIN................................................................................... 11
5.1.3 DISPATCH CONSOLE INTERFACE INTRODUCTION.........................................13
5.1.4 DISPATCH CONSOLE INITIATES A HALF-DUPLEX VOICE PRIVATE CALL 19
5.1.5 DISPATCH CONSOLE INITIATES A FULL-DUPLEX VOICE PRIVATE CALL.20
5.1.6 DISPATCH CONSOLE INITIATES A FULL-DUPLEX VIDEO PRIVATE CALL.20
5.1.7 DISPATCH CONSOLE INITIATES A VOICE GROUP CALL................................21
5.1.8 DISPATCH CONSOLE INITIATES A VIDEO GROUP CALL................................21
5.1.9 SENDING SMS AND MMS..........................................................................................22
5.1.10 FORCED RELEASE AND FORCED INSERTION BY THE DISPATCHER..... 22
5.1.11 DYNAMIC REGROUP................................................................................................23
5.1.12 TEMPORARY GROUP CALL................................................................................... 24
5.1.13 EMERGENCY CALL...................................................................................................25
5.1.14 DISPATCH CONSOLE LOCATION.........................................................................25
5.1.15 FRAME SELECT AND DISPATCH ON THE MAP................................................27
5.1.16 DISPATCH CONSOLE INITIATES VIDEO PULL................................................. 28
5.1.17 DISPATCH CONSOLE INITIATES VIDEO DISTRIBUTION............................... 30
5.2 OPERATIONS OF MULTIMEDIA DISPATCH SYSTEM......................................................31
5.2.1 DISPATCHER LOGIN...................................................................................................32

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page III
5.2.2 VIDEO PULL.................................................................................................................. 32
5.2.3 VIDEO DISTRIBUTION................................................................................................ 34
5.2.4 LOCATION......................................................................................................................37
6 CARD ALLOCATION AND NUMBER ALLOCATION.................................................................... 39
6.1 HAND-HELD TERMINAL NUMBER ALLOCATION.............................................................. 39
6.1.1 LOGIN TO THE UNIFIED OMM................................................................................. 39
6.1.2 USER AUTHENTICATION INFORMATION CONFIGURATION.......................... 40
6.1.3 USER NUMBER ALLOCATION..................................................................................41
6.1.4 ADD GROUP..................................................................................................................44
6.1.5 ADD GROUP MEMBER...............................................................................................45
6.2 CPE TERMINAL NUMBER ALLOCATION............................................................................. 47
6.2.1 LOGIN TO THE UNIFIED OMM................................................................................. 47
6.2.2 USER AUTHENTICATION INFORMATION CONFIGURATION.......................... 47
6.2.3 USER NUMBER ALLOCATION..................................................................................48
6.2.4 LOGIN TO THE LTE CORE NETWORK MANAGEMENT PAGE........................ 48
6.2.5 APN CONFIGURATION...............................................................................................49
6.2.6 SYNCHRONIZE DATA.................................................................................................51
6.2.7 SHOW CPE ACCESS STATUS................................................................................. 51
6.3 DISPATCHER MANAGEMENT................................................................................................ 52
7 REFERENCES........................................................................................................................................ 54
7.1 MANUALLY ADD TRUSTED SITES TO THE IE BROWSER............................................. 54
7.2 APPENDIX A.1.1..........................................................................................................................59
7.2.1 APPENDIX A.1.1.1........................................................................................................59

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page
IV
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure Index
Figure 2- 1 ZXIMCU PT01 P200 MPU.................................................................................................... 1
Figure 2- 2 ZXIMCU PT01 P200 RRU.....................................................................................................2
Figure 2- 3 ZXIMCU PT01 P200 Power Line......................................................................................... 3
Figure 2- 4 ZXIMCU P200 device............................................................................................................ 4
Figure 2- 5 Connection between MPU and RRU with the the power line......................................... 4
Figure 2- 6 Connection of the feeder and antenna............................................................................... 4
Figure 2- 7 Connection of GPS antenna................................................................................................. 5
Figure 2- 8 Power switch and indicator light...........................................................................................6
Figure 2- 9 Connection of the dispatch console.................................................................................... 6
Figure 3- 1 System Network Architecture............................................................................................... 7
Figure 4- 1 Adding Route...........................................................................................................................9
Figure 4- 2 Download plug-in and script on the OMM interface ..................................................... 9
Figure 4- 3 Trusted site script setting of IE browser........................................................................... 10
Figure 5- 1 Downloading client and plug-ins of the dispatch console..............................................11
Figure 5- 2 Selecting dispatch console local IP address................................................................... 11
Figure 5- 3 Login interface of the dispatch console............................................................................ 12
Figure 5- 4 Dispatch console interface..................................................................................................13
Figure 5- 5 Dispatch console interface layout......................................................................................14
Figure 5- 6 Add user to dispatching operation area............................................................................15
Figure 5- 7 Remove user from dispatching operation area............................................................... 15
Figure 5- 8 Sound channel selection..................................................................................................... 16
Figure 5- 9 User call attribute setting.....................................................................................................16
Figure 5- 10 Group call attribute setting................................................................................................17
Figure 5- 11 Dispatcher call attribute setting........................................................................................17
Figure 5- 12 GIS interface of the dispatch console.............................................................................18
Figure 5- 13 Video dispatch interface....................................................................................................19
Figure 5- 14 Dispatch console initiates a half-duplex voice private call..........................................19
Figure 5- 15 Dispatch console initiates a full-duplex voice private call........................................... 20
Figure 5- 16 Dispatch console initiates a full-duplex video private call........................................... 20
Figure 5- 17 Dispatch console initiates a voice group call.................................................................21
Figure 5- 18 Dispatch console initiates a video group call................................................................ 22
Figure 5- 19 Sending SMS and MMS....................................................................................................22

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page V
Figure 5- 20 Forced release by the dispatcher....................................................................................23
Figure 5- 21 Forced insertion by dispatcher.........................................................................................23
Figure 5- 22 Dynamic regroup................................................................................................................ 24
Figure 5- 23 Temporary group call.........................................................................................................25
Figure 5- 24 Emergency call................................................................................................................... 25
Figure 5- 25 Dispatch console location operation............................................................................... 26
Figure 5- 26 Map interface display and operation...............................................................................27
Figure 5- 27 Frame select on the map.................................................................................................. 27
Figure 5- 28 Frame select and dispatch on the map.......................................................................... 28
Figure 5- 29 Dispatch console initiates a video pull............................................................................29
Figure 5- 30 Toolbar of the video display window...............................................................................30
Figure 5- 31 Dispatch console Initiates video distribution..................................................................31
Figure 5- 32 Client Installation of the Multimedia Dispatch System.................................................31
Figure 5- 33 MDS client logging............................................................................................................. 32
Figure 5- 34 Operations of the multimedia dispatch video pull.........................................................33
Figure 5- 35 Multimedia dispatch video display window.................................................................... 34
Figure 5- 36 Multimedia dispatch video distribution............................................................................35
Figure 5- 37 Video distribution is successful........................................................................................35
Figure 5- 38 Video is distributed to the receiving terminal.................................................................36
Figure 5- 39 Ending video distribution...................................................................................................36
Figure 5- 40 MDS terminal location operation..................................................................................... 37
Figure 5- 41 MDS location display......................................................................................................... 38
Figure 5- 42 Viewing historical track of the terminal...........................................................................38
Figure 5- 43 Dispatching the terminal on the Map interface............................................................. 39
Figure 6- 1 Unified OMM interface.........................................................................................................40
Figure 6- 2 Add card.................................................................................................................................40
Figure 6- 3 Input Add card information..................................................................................................41
Figure 6- 4 Add user.................................................................................................................................42
Figure 6- 5 Input user information-1...................................................................................................... 43
Figure 6- 6 Input user information-2...................................................................................................... 43
Figure 6- 7 Add group.............................................................................................................................. 44
Figure 6- 8 Group account information setting.................................................................................... 45
Figure 6- 9 Add group member-1...........................................................................................................45
Figure 6- 10 Add group member-2.........................................................................................................46
Figure 6- 11 Add group member-3.........................................................................................................46
Figure 6- 12 Modify the group member attribute................................................................................. 47

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page
VI
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure 6- 13 Input user information........................................................................................................48
Figure 6- 14 Enter to expert diagnosis mode on the unified OMM interface..................................49
Figure 6- 15 Add CPE IP Pool and IP Segment..................................................................................50
Figure 6- 16 Create CPE Authorization Profile....................................................................................51
Figure 6- 17 Show CPE access status..................................................................................................52
Figure 6- 18 Add dispatcher account.....................................................................................................52
Figure 6- 19 Setting dispatcher account information.......................................................................... 53
Figure 7- 1 Trusted sits setting of the Internet Options...................................................................... 54
Figure 7- 2 Security settings of trusted sites-1.................................................................................... 55
Figure 7- 3 Security settings of trusted sites-2.................................................................................... 56
Figure 7- 4 Security settings of trusted sites-3.................................................................................... 56
Figure 7- 5 Temporary Internet Files Settings..................................................................................... 57
Figure 7- 6 Uncheck "Turn on Pop-up Blocker" .................................................................................58
Figure 7- 7 Advanced Setting of Internet Option................................................................................. 59

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 1
1Overview
This manual covers introduction and operating instruction of Caltta LTE Emergency
Command System, which includes configuration and operation methods for MDS,
core network, base station, terminals and peripheral supporting products. Please
select the corresponding operation steps according to the actual system and device.
2ZXIMCU PT01 P200 Version 3.0
2.1 Introduction of ZXIMCU PT01 P200 Version 3.0
The distributed structure of control unit and RF unit helps P200 reduce its weight,
which is more convenient for carrying. The System consists of MPU, RRU, power
connection line, etc.
Figure 2- 1 ZXIMCU PT01 P200 MPU

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page 2
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
1) Network Interface 1: used for connecting with dispatch console or backhaul device
2) Handle: convenient to carry
3) Network Interface 2: used for connecting with dispatch console or backhaul device
4) Optoelectronic Input Interface: connect with RRU via power line.
5) CPS Antenna Interface: connect with GPS Antenna
6) System Debugging Interface
7) Extended Optical Fiber Interface
Figure 2- 2 ZXIMCU PT01 P200 RRU

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 3
1) Power Input Interface: power input and connect with MPU
2) RF Antenna Interface
3) Handle
4) RF Antenna Interface
Figure 2- 3 ZXIMCU PT01 P200 Power Line
1) A Connector : Waterproof connector with large size diameter, connect to RRU
2) B Connector , Waterproof connector with small size diameter, connect to MPU
3) C Connector : Triangle plug, connect to external power supply

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page 4
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
2.2 ZXIMCU PT01 P200 Connection Operation
Step 1: Take out the device as shown below
Figure 2- 4 ZXIMCU P200 device
Step 2: Connect the A connector of the power line to RRU, connect B connector to
MPU, and tighten them up
Figure 2- 5 Connection between MPU and RRU with the the power line
Step 3: Connect feeder and antenna: Connect one end of the antenna feeders (2
pieces) to the RF interface of RRU, connect the other end to the RF antenna. Make
sure to tighten them up when connecting, otherwise it may cause the weak signal
and lead to failure of registration when the terminal is slightly far away from the
system.
Figure 2- 6 Connection of the feeder and antenna

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 5
Step 4: Connect GPS Antenna (no need to connect if the device is used as a
stand-alone station): Connect one end of the GPS feeder to the GPS antenna
interface of MPU, the other end to the GPS antenna
Figure 2- 7 Connection of GPS antenna

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page 6
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Step 5: Connect the C connector of the power line to the Power Input Interface
(100-240V AC, 50/60Hz), then turn on the main power switch of the device. The main
power switch is on the side of the RRU.
Observe the RRU indicators. The RUN indicator flashes after power-on, the RUN and
OPT1 indicator flash after the system starts normally, and the ACT indicator is
always on.
Figure 2- 8 Power switch and indicator light
Step 6: Use network cable to connect the dispatching laptop to any of the MPU
network interface. The network interface could also be used as output interface of the
system transmission.
Figure 2- 9 Connection of the dispatch console

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 7
3Network Architecture Introduction
Caltta LTE portable emergency command system is based on All-IP flat network
architecture. The system follows B-TrunC Broadband Trunking standard, integrates
LTE core network iEPC, professional voice and video trunking network DSS,
multimedia dispatching server MDS, base station system and terminals, and provides
end-to-end multimedia command and dispatch solution. While providing kinds of
multimedia service such as voice, video and data, the system can also support data
bearer and transmission for the third-party, keeping the system in openness.
LTE Portable Emergency Command System network topology is shown as follows:
Figure 3- 1 System Network Architecture
Remark: The network architecture diagram of the system is a schematic diagram of each
network unit. The physical form of the device is determined by different products.

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page 8
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
LTE core network iEPC is a common LTE core network device complying to 3GPP
standard specification, consists of MME, S/P-GW, and HSS, which is used for
providing common LTE services.
Trunking core network system DSS is composed of PDS and DAS. PDS provides
trunking services for trunking users. DAS provides dispatching services and industry
customized services.
Multimedia dispatching server MDS has various functions such as mobile video
surveillance, Video pull, video distribution, video dubbing, etc.
4Dispatching PC Configuration
Both common PC or laptop can be used as dispatching PC. The PC operating
system requires Win 7 or above.
4.1 IP Address Setting
The IP address of PC needs to interconnect with the IP address of MDS server
(defaults to 192.168.13.20) and the IP address of trunking dispatch console (defaults
to 192.168.13.21). Interconnecting to OMM IP address is also required while login
the OMM system.
The following two IP addresses can be configured individually in the LAN to
communicate with MDS dispatch console, trunking dispatch console and OMM
system , to login the dispatch console (in the LAN, the IP address of the dispatch
console needs to be set in the same network segment with the trunking dispatch
console and MDS dispatch console, and there is no IP address conflict):
192.168.13.160/24
192.168.90.160/24
Open the PC command terminal and add a static route for the direct access to the
individual device, CPE and camera:
route add 45.45.0.0 mask 255.255.0.0 192.168.13.80 –p

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 9
Figure 4- 1 Adding Route
4.2 IE 11 Browser Setting
Login to the OMM system via browser. Support both IE and Chrome browser. If using
IE browser, version 11 is required.
Before logging in, make sure the PC has been installed with Adobe flash player and
the IE settings are correct, otherwise the OMM interface may not open. The Adobe
flash player plug-in and IE setting script can be downloaded and installed on the
OMM interface.
Figure 4- 2 Download plug-in and script on the OMM interface
Script setting of IE trusted site:
Extract the following compressed package (or the batch file downloaded from the
OMM), open Internet Explore11 to set up the script:
IE11SettingsZh.7
z

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page 10
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Input the OMM server address in the CMD window, which defaults to
192.168.90.129.
Figure 4- 3 Trusted site script setting of IE browser
Press Enter button after inputting the IP address, the script will set up automatically.
Click any key to exit when finishing set up.
5Trunking Services Operations
5.1 Operations of DAS Unified Dispatch Console
5.1.1 Dispatch Console Installation
Install the dispatch console software on the PC in advance and login the DAS
dispatch console via the CS client.
Input the defaulted IP address 192.168.13.21 in the IE browser, then it will enter into
the interface of plug-in and client downloading.
After downloading the client and plug-in., install the plug-in first, then install the client
later according to the defaulted settings. Restart the PC after the installation.

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 11
Figure 5- 1 Downloading client and plug-ins of the dispatch console
5.1.2 Dispatch Console Login
Double click the DAS dispatch console icon and open the software. The DAS
software will pop up the IP selection interface if the fixed IP address changes or for
first time login. Select 192.168.13.160 as the dispatch console local IP address. Click
OK to enter the login interface.
Figure 5- 2 Selecting dispatch console local IP address

ZXIMCU PT01 P200 Portable Emergency Command System Operation Manual
Page 12
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure 5- 3 Login interface of the dispatch console
Input the account number and password on the login interface of dispatch console ,
select Remember Password and click the setting icon on the right side, Input the
server IP address (IP address of the trunking dispatch console) and MDS IP address,
then click Login to login in the dispatch console. The defaulted parameters of the
dispatch console are as follows:
Account number: dis01, Password: 666666
Server IP address (IP address of the trunking dispatch console) : 192.168.13.21
MDS IP address: 192.168.13.20
Tip 1: Modifying the Local IP Address of the Dispatch Console
Enter to the login interface of the dispatch console after the local IP address is
configured. Will fail to access to the server if selecting the wrong IP address.
There are two methods to modify the local IP address:
1. Method 1: Delete the local fixed IP address and add another IP address, then
re-select the IP address.