cam HF-T Series User manual

Original
operating manual
Flexibility & experience
Fork clamp
HF-T – HFR series
Operating manual
08/2022 – V01

2/40
© 08-2022. CAM attachments is a trademark of TVH Parts Holding NV, Brabantstraat 15, B-8790 Waregem. All rights reserved. No part of this publication may
be reproduced or communicated in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage
or retrieval system, without prior and explicit permission of TVH Parts Holding NV. Printing errors reserved. Photographs and illustrations are included for
reference purposes only.
Responsible editor: TVH Parts Holding NV, Brabantstraat 15, BE-8790Waregem
TVH is a supplier of after-market spare parts and accessories that are suitable for the maintenance and repair of OEM equipment.

3/40
www.tvh.com/hfrv01
BG Bulgarian Можете да намерите това ръководство на Вашия език чрез линка, посочен по – долу.
CS Czech Tento návod najdete ve svém jazyce prostřednictvím odkazu níže.
DA Danish Du kan finde denne vejledning på dit sprog via nedenstående link.
DE German Sie finden diese Bedienungsanleitung in Ihrer Sprache unter folgendem Link.
EL Greek Μπορείτε να βρείτε αυτό το εγχειρίδιο στη γλώσσα σας μέσω του παρακάτω συνδέσμου.
EN English You can find this manual in your language via below link.
ES Spanish Encontrarás este manual en tu propio idioma a través del siguiente enlace.
ET Estonian Oma emakeelse juhendi leiate allolevalt lingilt.
FI Finnish Löydät tämän manuaalin omalla kielelläsi alla olevan linkin taka.
FR French Vous trouverez ce manuel dans votre langue via le lien ci-dessous.
GA Irish Tá an lámhleabhar seo ar fáil i do theanga tríd an nasc thíos.
HR Croatian Ovaj prirucnik mozete pronaci na svom jeziku putem donjeg linka.
HU Hungarian Ez a kézikönyv az Ön nyelvén az alábbi link alatt található.
IS Icelandic Hægt er að finna þessa handbók á þínu tungumáli á tenglinum hér að neðan.
IT Italian Cliccando sul link sottostante troverai il manuale nella tua lingua.
LT Lithuanian Šį vadovlėlį savo kalba rasite spustelėję žemiau esančią nuorodą.
LV Latvian Rokasgrāmatu latviešu valodā Jūs varat atrast izmantojot zemāk esošo saiti.
MT Maltese Tista’ssib dan il-manwal bil-lingwa tiegħek permezz tal-link ta’hawn taħt.
NL Dutch Je vindt deze handleiding in jouw taal via onderstaande link.
NO Norwegian Du finner denne håndboken på ditt språk via linken nedenfor.
PL Polish Niniejsza instrukcja obsługi dostępna jest w Twoim języku za pośrednictwem poniższego linku.
PT Portuguese Pode encontrar este manual no seu idioma através do link abaixo.
RO Romanian Puteți găsi acest manual în limba dvs. prin link-ul de mai jos.
SK Slovak Manuál vo vašom jazyku môžete nájst v priloženom vysvietenom riadku.
SL Slovenian Ta priročnik najdete v svojem jeziku preko spodnje povezave.
SV Swedish Du kan hitta denna manual på ditt språk via länken nedan.
TR Turkish Bu kılavuzu aşağıdaki bağlantıdan kendi dilinizde bulabilirsiniz.

4/40
Thank you for using our product. For your safety and to ensure a correct operation, we would like to
bring to your attention some aspects of this manual:
• This booklet supplies useful instructions for the correct operation and maintenance of the product.
It is therefore necessary to pay the utmost attention to all of the paragraphs that illustrate the most
simple and secure way to operate and use this product.
• This booklet must be considered an integral part of the machine and must be included with the
deed of sale.
• Neither this publication, nor part of it, can be reproduced without written authorisation on the part
of the manufacturer.
• All of the information reported herein is based on data available at the moment of printing;
the manufacturer reserves the right to carry out modifications to its own products at any moment,
without notice and without incurring any sanction. It is therefore suggested to always check for
possible updates.
The person responsible for the use of the product must make sure that all of the safety rules in force in
the country of its use are applied, to guarantee that the equipment is used in conformity with the use
for which it is destined and to avoid any dangerous situation for the user.
The following warning signs are used in this manual to warn you for dangers and risks:
Informative, be careful.
Warning, can lead to injury and damage if instructions aren’t followed.
Danger, can lead to serious or fatal injury and serious damage if instructions aren’t
followed.
The following conventions are used in this manual:
6
5
1
2
3
4
HF – T - series
1Top
2 Bottom
3Left
4 Right
5 Front
6 Back

5/40
6
5
1
2
3
4
HFR – series
1Top
2 Bottom
3Left
4 Right
5 Front
6 Back
Unless otherwise stated, directions apply as seen from the operator’s control seat when facing
the attachment.

6/40
CONTENTS
1. INTRODUCTION ..................................................................................................... 7
2. DESCRIPTION ........................................................................................................ 8
2.1. Technical data......................................................................................................................8
2.2. Main components of the product .........................................................................................9
2.3. Placement of the decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4. Type plate..........................................................................................................................10
3.1. Explanation of the safety decals ..........................................................................................11
3.2 General safety instructions..................................................................................................11
4. TRANSPORT AND STORAGE....................................................................................13
5. ASSEMBLY AND INSTALLATION...............................................................................14
5.1. Packing list.........................................................................................................................14
5.2. Safety instructions for assembly and installation of the product............................................14
5.3. Assembly of the product ....................................................................................................14
6. COMMISSIONING ..................................................................................................21
7. OPERATION..........................................................................................................22
7.1. Safety instructions for operating the product.......................................................................22
7.2. Operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8. MAINTENANCE .....................................................................................................26
8.1. Safety instructions for the maintenance of the product........................................................26
8.2. Maintenance schedule .......................................................................................................26
8.3. Maintenance instructions ...................................................................................................26
9. TROUBLESHOOTING..............................................................................................30
10. FINAL DECOMMISSIONING AND DISPOSAL ..............................................................31
11. ANNEXES .............................................................................................................32
11.1. CE certificate......................................................................................................................32
11.2. Complete overview of technical data ..................................................................................34
11.3. Spare parts list....................................................................................................................37

7/40
1. INTRODUCTION
This manual contains all the necessary information on the installation and operation of the HF-fork
clamp.
Some of the maintenance operations should only be carried out by professional technicians. If you
require this information and the maintenance steps, please contact your dealer. Also included in this
manual are a number of safety instructions to create a safe working environment.
The fork clamp is a multifunctional attachment that can be used both as a fork positioner and to clamp
loads. Thanks to the 3-in-1 function, you can now easily handle pallets, bales, boxes, etc., without
changing attachments. A versatile function that is ideally suited to various branches of industry, such
as the food industry and manufacturing. Suitable ambient temperature is –20 °C up to 60 °C.
If the clamp is used in extreme conditions with temperature and humidity changes, you must contact
your dealer and obtain permission from the manufacturer.
Check your machine manual to make sure you opt for the right fork clamp with the correct load
capacity. Do not use this product for any other purposes.
Please read the manual thoroughly and observe the safety procedures before putting the unit into
operation. The operator and all persons who come into contact with the equipment should read it
carefully and regularly and have access to it at all times.
Keep this manual near the equipment and in a safe place for future reference!
Contact your dealer for any further questions or concerns you may have.
We guarantee a long period of trouble-free operation if the unit is operated and maintained correctly.
We hope you will enjoy working with your fork clamp.
This fork clamp may be unsafe if adequate maintenance is neglected.Therefore,
adequate maintenance facilities, trained personnel and procedures should be provided.
Maintenance and inspection shall be performed in conformity to the following practices:
1. A scheduled planned maintenance, lubrication and inspection system should be followed
(see maintenance instructions chapter 8).
2. Only qualified and authorised personnel shall be permitted to maintain, repair, adjust, and
inspect the fork clamp.
3. Modifications and additions which affect capacity and safe operation shall not be
performed by the customer or user without the manufacturer’s prior written approval.
Capacity, operation and maintenance plates or decals shall be changed accordingly.
4. If modifications are made without the written approval of the manufacturer, the warranty
will no longer apply.
Any person in charge of putting the machine into operation, the operation itself or the
maintenance of the machine is urged to carefully read and observe the following instructions.
Make sure that the operators of this product are familiar with the safety instructions and follow
all the procedures.
Neglecting these instructions can cause injury or death.

8/40
2. DESCRIPTION
2.1. Technical data
Always check the type plate for the correct information.
A complete overview with all technical data of each product can be found in chapter 11:
“Annexes”.
1T
LL L1
ISO2328
W6
W4
VCG
HCG
W1 W10-W11
01H
W1 Width of forks
W4 Frame width
W6 Minimum width of fork carriage
W10-11 Opening range
H10 Central visual opening
ISO2328 FEM class
VCG Vertical centre of gravity
HCG Horizontal centre of gravity
LL Lost load
L1 Maximum useful length of fork
T1 Thickness of the forks

9/40
W1 W10-W11
W6
W4
1T
L1
LL
ISO2328
HCG
VCG
W1 Width of forks
W4 Frame width
W6 Minimum width of fork carriage
W10-11 Opening range
ISO2328 FEM class
VCG Vertical centre of gravity
HCG Horizontal centre of gravity
LL Lost load
L1 Maximum useful length of fork
T1 Thickness of the forks
T1 Thickness of the forks
2.2. Main components of the product
42
3
5
7
61
N° Component
1 Forks
2Hydraulic components
3Hooks for mounting on the fork
carriage
4Hooks to lift the fork clamp
5Upper guide
6Lower guide
42
3
5
7
61
7Hydraulic cylinders

10/40
2.3. Placement of the decals
The safety and warning labels should be placed as described in the pictures below. See chapter 3 for
the explanation of the safety warnings. If the decals are damaged or missing, replace them.
1
3
2
N° Decal Explanation Reference
1XXXXX.XXXX.XXXXXXXXXX
CATALOGUENUMBER
NO.D’IDENTIFICATION
KATALOGNUMMER
CATALOGUSNUMMER
NUMERODE REFERENCIA
NUMERODIC ATALOGO
DONOT EXCEED THE LIFT TRUCK RESIDUAL CAPACITY • DE RESTCA PACITEITVANDE HEFTRUCK MAG NIET OVERSCHREDEN WORD EN • DIE RESTKAPAZITAT DES GABELSTAPLERSDARF NICHT UBERSCHRIT TEN WERDEN •
NEPASDEPASS ER LA CAPACITE RESIDUELLE DU CHARIOT ELEVATEUR • NO EXCEDER LA CAPACIDAD RESIDUAL DE LA CARRETILLA ELEVADORA • NON SUPERARE L A PORTATARESIDUA DEL CARRELLO ELEVATORE
RATEDCAPACITY
CAPACITENOMINALE
NENNTRAGFAHIGKEIT
NOMINALECAPACITEIT
CAPACIDADNOMINAL
PORTATANOMINALEkgXXXXXXXXXXXX
WEIGHT
MASSE
MASSE
GEWICHT
PESO
MASSAkgXXXXXXTHICKNESS
EPAISSEUR
DICKE
DIKTE
ESPESOR
SPESSORE mmXXXX
RECOMMENDEDOPERATINGPRESSURE
PRESSIOND’UTILISATIONRECO MMANDE
ANBEFOHLENARBEITDRUCK
AANBEVOLENWERKDRUK
PRESIONOPERATIVA RECOMENDADA
PRESIONEDI ESERCIZIO RACCOMANDATA barXXXX MAXIMUM
MAXIMA
MASSIMA barXXXX
VERTICAL
VERTICAL
VERTICAL
VERTICAAL
VERTICA
VERTICALEL mmXXXXX
HORIZONTALCENTREOF GRAVITY
CENTREDEG RAVITEHORIZONTAL
HORIZONTALEIGENSCHWERPUNKT
HORIZONTAALZWAARTEPUNT
CENTRODE GRAVIDAD HOR IZONTALE
CENTRODI GRAVITA ORIZZONTALEmmXXXXX
SERIALNUMBER
NO.DE SERIE
SERIENNUMMER
SERIENUMMER
NUMERODE SERIE
NUMERODI SERIE
XXXXX/XX/XXXXXYEAR
ANNE
JAHR
JAAR
HANO
ANNO
XXXX
www.camattachments.com
Manufacturedin the EU for TVH PARTS NV
Brabantstraat15 • B-8790 Waregem
Importedin the UK by TVH UK
NationalDistribution Centre • Zortech Avenue
Kidderminster,Worcestershire • DY11 7DY With this type plate
you can identify
your product
Contact
your dealer
2
1
2
3
4
1. Warning
2. Important:
carefully read
the manual
before using the
equipment and
carrying out the
maintenance
operations
3. Important: risk of
limb crushing
4. Important:
pressurised
liquids
165TA4750
3CAM attachments
logo
Contact
your dealer
2.4. Type plate
N° Explanation
1CAM attachments logo
2Equipment capacity
3Equipment name
4 Address
5Horizontal centre of gravity
6Serial number
7CE logo
N° Explanation
8UKCA logo
9Year of construction
10 Vertical centre of gravity
11 Thickness
12 Equipment weight
13 Maximum operating pressure
14 Recommended operating pressure
XXXXX.XXXX.XXXXXXXXXX
CATALOGUE NUMBER
NO. D’IDENTIFICATION
KATALOG NUMMER
CATALOGUS NUMMER
NUMERO DE REFERENCIA
NUMERO DI CATALOGO
DO NOT EXCEED THE LIFT TRUCK RESIDUAL CAPACITY • DE RESTCAPACITEIT VAN DE HEFTRUCK MAG NIET OVERSCHREDEN WORDEN • DIE RESTKAPAZITAT DES GABELSTAPLERS DARF NICHT UBERSCHRITTEN WER DEN •
NE PAS DEPASSER LA CAPACITE RESIDUELLE DU CHARIOT ELEVATEUR • NO EXCEDER LA CAPACIDAD RESIDUAL DE LA CARRETILLA ELEVADORA • NON SUPERARE LA PORTATA RESIDUA DEL CARRELLO ELEVATORE
RATED CAPACITY
CAPACITE NOMINALE
NENNTRAGFAHIGKEIT
NOMINALE CAPACITEIT
CAPACIDAD NOMINAL
PORTATA NOMINALEkgXXXXXXXXXXXX
WEIGHT
MASSE
MASSE
GEWICHT
PESO
MASSAkgXXXXXXTHICKNESS
EPAISSEUR
DICKE
DIKTE
ESPESOR
SPESSORE mmXXXX
RECOMMENDED OPERATING PRESSURE
PRESSION D’UTILISATION RECOMMANDE
ANBEFOHLEN ARBEIT DRUCK
AANBEVOLEN WERKDRUK
PRESION OPERATIVA RECOMENDADA
PRESIONE DI ESERCIZIO RACCOMANDATA barXXXX MAXIMUM
MAXIMA
MASSIMA barXXXX
VERTICAL
VERTICAL
VERTICAL
VERTICAAL
VERTICA
VERTICALEL mmXXXXX
HORIZONTAL CENTRE OF GRAVIT Y
CENTRE DE GRAVITE HORIZONTAL
HORIZONTALEIGENSCHWERPUNKT
HORIZONTAAL ZWAARTEPUNT
CENTRO DE GRAVIDAD HORIZONTALE
CENTRO DI GRAVITA ORIZZONTALEmmXXXXX
SERIAL NUMBER
NO. DE SERIE
SERIEN NUMMER
SERIE NUMMER
NUMERO DE SERIE
NUMERO DI SERIE
XXXXX/XX/XXXXXYEAR
ANNE
JAHR
JAAR
HANO
ANNO
XXXX
www.camattachments.com
Manufactured in the EU for TVH PARTS NV
Brabantstraat 15 • B-8790 Waregem
Imported in the UK by TVH UK
National Distribution Centre • Zortech Avenue
Kidderminster, Worcestershire • DY11 7DY
1 4
1314
3
2
9
10
12 11
6
5 87

11/40
3. SAFETY INSTRUCTIONS
3.1. Explanation of the safety decals
If the decals are damaged or missing, please replace them.
Make sure that all the safety messages are legible.
Replace damaged stickers asking the manufacturer for new ones.
If the part to be replaced bears a sticker, ensure that a new sticker is applied to the new part.
Decal Explanation Reference
1
2
3
4
1. Warning
2. Important: carefully read the manual before
using the equipment and carrying out the
maintenance operations
3. Important: risk of limb crushing
4. Important: pressurised liquids
165TA4750
3.2 General safety instructions
• Do not operate the product unless you are of age.
• The person responsible for the use of the product must make sure that all of the safety rules
in force in the country of its use are applied, to guarantee that the equipment is used in
conformity with the use for which it is intended and to avoid any dangerous situation for
the user.
• The operator should wear safety shoes and gloves when using or maintaining the fork
clamp.
• People who come into contact with this equipment and apply procedures, working
practices or use tools that are not described in this manual, are responsible for the safe and
proper operation of the equipment.
• Never allow people to climb onto the equipment or load, or walk under it.
• Do not use the equipment to lift or transport people.
• Do not use the fork clamp for any other purposes than those intended.
• Never exceed the maximum allowed capacity that is indicated on the type plate.
• The safety precautions and warnings are indicated in the manual and on the equipment by
means of visual messages.
• Failure to pay attention to these warning messages may jeopardise the safety of the
operator with serious consequences for himself and other people.

12/40
In addition to the safety regulations described in this section, please take note of all the
information provided in the manual of the lifting device onto which the fork clamp is to be
mounted.
Failure to comply with the basic safety norms or precautions may lead to accidents during
operation, maintenance or repair of the equipment.
It is often possible to avoid accidents by recognising potentially dangerous situations before
they occur. The operator must be aware of potential dangers and possess the training,
competence and equipment necessary to correctly carry out the work.
CAM attachments cannot under any circumstances be held responsible for accidents or
damage resulting from the use of the equipment by inadequately trained personnel or if
inappropriate use has been made of the same, as well as the, even partial, non-observance of
the safety norms and the intervention procedures contained in the present manual and in that
of your lifting device.
CAM attachments cannot envisage each possible circumstance that may result in danger.
Therefore, the warnings given in this publication and appearing on the equipment are not
exhaustive.
If equipment, procedures, work methods or working techniques are used that are not
specifically advised by CAM attachments, it is necessary to make sure that there is no danger
to the operator or other people.

13/40
4. TRANSPORT AND STORAGE
1. Transport
If you want to transport the fork clamp on a pallet, make sure that the attachment is securely attached
so that it can’t fall off.
Safely transport the fork clamp by following the steps below:
1. Check the type plate to know the weight of the fork clamp. Select the appropriate materials
according to the weight (sling, cable, hook, etc.).
2. Attach the fork clamp to the lifting device with the lifting sling (see chapter 5.3.).
3. Lift the fork clamp with a crane. Only use a crane with sufficient capacity and secure the fork clamp
to the crane, so that it can be lifted safely.
4. Place the fork clamp onto a pallet.
5. Secure the attachment onto a transport pallet with retaining bands.
6. Wrap the attachment with film to protect it from weather influences and corrosion during
transport.
• Adjust your driving speed while driving over rough terrain and up and down slopes.
• Only transport the fork clamp in its lowest position.
• Before transporting the fork clamp, carefully read the instructions in the manual of the lifting
device.
2. Storage
The fork clamp must always be stored in a dry, frost-free and temperature-controlled environment.
Do not store this product outside in a wet environment.
Store the fork clamp in a safe place and make sure it can’t fall over.
Lubricate metal parts with an anti-corrosive agent.
Avoid direct sunlight.
Do not leave the truck unguarded without applying the handbrake and switching off the
engine first.

14/40
5. ASSEMBLY AND INSTALLATION
5.1. Packing list
Description Amount Reference
Fork clamp 1See chapter
11.2
Operating manual 1 167TA9006
Spare part list 1See 11.2.
Spare parts list
5.2. Safety instructions for assembly and installation of the product
• Wear safety gloves and safety shoes when assembling the fork clamp.
• The assembly and installation must be carried out by an expert.
• Make sure that the goods and packaging are in good condition.
• Before commissioning, carry out a risk analysis of the assembly of the CAM attachment on
the forklift.
• Before using the fork clamp, carefully read the instructions in the manual of your lifting
device.
5.3. Assembly of the product
• Before installing the equipment, a thorough visual check must be carried out to make sure
that no damage occurred during the transportation and handling stage.
• If one or more components are damaged, it is necessary to notify CAM attachments and
agree on the measures to be taken.
HF/HF – T clamp
1. Remove the packing materials carefully.
2. Place the fork clamp on a flat surface.
3. Remove the lower hooks on both sides.
4. Attach and lift the fork clamp between the hooks and the HF/
HF-T drawbar as shown in the picture below.
Check the type plate to know the weight of the fork
clamp. Select the appropriate materials according to the
weight (slings, cables, hooks, etc.)
Lift the fork clamp with a crane. Only use a crane with
sufficient capacity and secure the fork clamp to the
crane, so that it can be lifted safely

15/40
5. Place the fork clamp parallel to the fork carriage of your lifting
device.
6. When assembling the fork clamp, part A should be placed
on one of the two upper jaws in slot B and this on the side of
the lifting device. A
B
x
y
7. Position the fork clamp centrally on the plate of the lifting device.
8. Lift the clamp by lifting the lift truck plate and position the two lower blocking hooks, securing
them with the relevant bolts
Screw dimension Driving torque (Nm)
8.8 type 10.9 type 12.9 type
M12 87 122 147
M14 138 194 235
M16 210 299 357
M20 411 578 696
M24 711 1000 –
9. Connect the hydraulics.
10. Your fork clamp is now ready for use!
HF
HF-T
OPEN-CLOSE
FORKS
HF
OPEN-CLOSE
FORKS
INTEGRATED
SIDESHIFTING
HF-T
HF
HF-T
OPEN-CLOSE
FORKS
HF
OPEN-CLOSE
FORKS
INTEGRATED
SIDESHIFTING
HF-T

16/40
HF – TS clamp
1. Remove the packing materials carefully.
2. Place the fork clamp on a flat surface.
3. Remove the lower hooks on both sides.
4. Attach and lift the fork clamp between the hooks and
the HF - TS drawbar as shown in the picture below.
Before lifting the equipment, make sure that the
lifting materials (slings, cables, hooks, etc.) are
adequate for the weight of the equipment (see
identification label).
Check the stability of the equipment before lifting.
Check the type plate to know the weight of the
fork clamp. Select the appropriate materials
according to the weight (slings, cables, hooks, etc.)
Lift the fork clamp with a crane. Only use a crane
with sufficient capacity and secure the fork clamp
to the crane, so that it can be lifted safely.
5. Place the fork clamp parallel to the fork carriage of your
lifting device.
6. When mounting the fork clamp, part A on the side-shift
cylinder must be inserted into slot B on the side of the
forklift. B
A
x
y
7. Place the clamp centrally on the plate of the forklift truck
8. Lift the clamp by lifting the lift truck plate and position the two lower blocking hooks, securing
them with the relevant bolts
Screw dimension Driving torque (Nm)
8.8 type 10.9 type 12.9 type
M12 87 122 147
M14 138 194 235
M16 210 299 357
M20 411 578 696
M24 711 1000 –

17/40
9. Connect the hydraulics.
10. Your fork clamp is now ready for use!
HFR clamp
1. Remove the packing materials carefully.
2. Place the fork clamp on a flat surface.
3. Remove the lower hooks on both sides.
4. Attach and lift the fork clamp between the hooks and
the HFR drawbar as shown in the picture below
Before lifting the equipment, make sure that the
lifting materials (slings, cables, hooks, etc.) are
adequate for the weight of the equipment (see
identification label).
Check the stability of the equipment before lifting.
Check the type plate to know the weight of the
fork clamp. Select the appropriate materials
according to the weight (slings, cables, hooks, etc.)
Lift the fork clamp with a crane. Only use a crane
with sufficient capacity and secure the fork clamp
to the crane, so that it can be lifted safely.
5. Place the fork clamp parallel to the fork carriage of your
lifting device
HF-TS
SIDESHIFTING
OPEN-CLOSE
FORKS
HF-TS

18/40
6. When mounting the fork clamp, part A on the sides-hift
cylinder must be inserted into slot B on the side of the
forklift.
BA
x
y
7. Place the clamp centrally on the plate of the forklift truck.
8. Lift the clamp by lifting the lift truck plate and position the two lower blocking hooks, securing
them with the relevant bolts
Screw dimension Driving torque (Nm)
8.8 type 10.9 type 12.9 type
M12 87 122 147
M14 138 194 235
M16 210 299 357
M20 411 578 696
M24 711 1000 –
9. Connect the hydraulics.
10. Your fork clamp is now ready for use!
HF – TS clamp
1. Remove the packing materials carefully.
2. Place the fork clamp on a flat surface.
3. Remove the lower hooks on both sides.
HFR
ROTATION
JOINT
OPEN-CLOSE
FORKS
HFR

19/40
4. Attach and lift the fork clamp between the hooks and
the HFR drawbar as shown in the picture below.
Before lifting the equipment, make sure that the
lifting materials (slings, cables, hooks, etc.) are
adequate for the weight of the equipment (see
identification label).
Check the stability of the equipment before lifting.
Check the type plate to know the weight of the
fork clamp. Select the appropriate materials
according to the weight (slings, cables, hooks, etc.)
Lift the fork clamp with a crane. Only use a crane
with sufficient capacity and secure the fork clamp
to the crane, so that it can be lifted safely.
5. Place the fork clamp parallel to the fork carriage of your
lifting device.
6. When mounting the fork clamp, part A on the side-shift
cylinder must be inserted into slot B on the side of the
forklift.
BA
x
y
7. Place the clamp centrally on the plate of the forklift truck.
8. Lift the clamp by lifting the lift truck plate and position the two lower blocking hooks, securing
them with the relevant bolts
Screw dimension Driving torque (Nm)
8.8 type 10.9 type 12.9 type
M12 87 122 147
M14 138 194 235
M16 210 299 357
M20 411 578 696
M24 711 1000 –

20/40
9. Connect the hydraulics
10. Your fork clamp is now ready for use!
For correct operation, the fork clamp requires an oil flow rate of 25 l/min at a maximum pressure
of 180 bar.
A flow rate lower than recommended will result in a lower rotational speed.
A flow rate higher than the maximum may result in overheating, reduced system performance
and shortened hydraulic system life.
After the assembly of the attachment and before putting the device into operation, check if all
the functions operate correctly.
Any failure of the safety devices can cause malfunctioning and damage to the attachment.
5.3.1. Bleeding the hydraulic system
To avoid air from entering your hydraulic system, which could eventually cause damage to the fork
clamp, it’s necessary to bleed the hydraulic system before use.
1. Start your lifting device.
2. rotate or move your fork clamp several times in both directions.
3. Inspect the hydraulic circuit for any leaks
HFR-TS ROTATION
JOINT
SIDESHIFTING
OPEN-CLOSE
FORKS
HFR-TS