Cambridge Audio AZUR 840A V2 Administrator guide

Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge-audio.com
840A v2.0 Amplifier
Remote Control Codes
All Codes are RC5 format.
System Code = 16
Key Command Code (decimal)
Input 1 4
Input 2 5
Input 3 3
Input 4 1
Input 5 2
Input 6 0
Input 7 6
Input 8 7
Vol - 17
Vol + 16
Mute toggle 13
Amp on 14
Amp off (Standby) 15
Standby toggle 12
Mute on 50
Mute off 51
Speaker Select 20
Mode 21
Bright 18
Source Up 8
Source Down 9
Speaker select A 28
Speaker select B 29
Speaker select A + B 30
Note the Discrete Mute On and Off and Power On and Off codes which don’t
have dedicated buttons on the remote are also actually available from the
remote by special procedure, see product manual
Information in this document has been carefully checked for accuracy; however, Cambridge Audio's policy is
one of continuous improvement, therefore design and specifications are subject to change without prior
notice. If you notice any errors please feel free to email us at: [email protected]
This document contains proprietary information protected by copyright. All rights are reserved. No part of this
document may be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer.
© Copyright Cambridge Audio Ltd 2008