Cambridge Audio azur 840A Installation instructions

Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge-audio.com
Azur 840A/C Remote Control Commands
Commands can be received in three ways:
- modulated IR from the remote control
- modulated IR signals input to the IR In socket (on the rear panel)
- unmodulated positive logic TTL level commands input to the Control
Bus In socket (on the rear panel)
The 840C responds to the IR commands shown in the table below:
ALL commands are NEC format with a System Code of A0 A0
Key Command Code (hex)
1 01
2 09
3 11
4 19
5 02
6 0A
7 12
8 1A
9 03
0 0B
1+ 13
Prog 1B
Play 15
Pause 1D
Stop 1C
Random 0E
Remain 0F
Skip left 04
Skip right 0C
Repeat 16
AB 17
<< 05
>> 0D
Intro 06
Space 1E
Open 07
Power toggle 44
Power On 46
Power Off 45
Bright toggle 47
Menu 48
Select 49
Mute 4A
Mute on 4B
Mute off 4C

Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge-audio.com
The 840A responds to the IR commands shown in the table below:
ALL commands are Philips RC5 format with a System Code of 16
Key Command Code (dec)
Aux/Phono 4
CD 5
Tuner/DAB 3
DVD 1
AV/MD 2
Tape Mon 0
Source 7 6
Source 8 7
Vol - 17
Vol + 16
Mute 13
Amp on 14
Amp off 15
Standby toggle 12
Mute on 50
Mute off 51
Speaker Select 20
Mode 21
Bright 18
Source Up 8
Source Down 9
Clipping Off 10
Information in this document has been carefully checked for accuracy; however, Cambridge Audio's policy is
one of continuous improvement, therefore design and specifications are subject to change without prior
notice. If you notice any errors please feel free to email us at: [e-mail]
This document contains proprietary information protected by copyright. All rights are reserved. No part of
this document may be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer.
© Copyright Cambridge Audio Ltd 2006