Cambridge Audio ONE+ DX1+ User manual

Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge
One
OneOne
One
System Code = B0 4F
(NEC Code)
Key
EJECT
POWER_TOGGLE
PRESET
1
PRESET
2
PRESET
3
PRESET
4
PRESET
PRESET
6
PRESET
7
PRESET
8
PRESET
9
INFO
PRESET
0/10
10+
MUTE_TOGGLE
STEREO_MONO
SOURCE_UP
VOL_UP
SKIP_DOWN
PLAY_PAUSE_ENTER
SKIP_UP
VOL_DOWN
SEARCH_BACK
STOP
SEARCH_UP
REPEAT
RANDOM
PROGRAM
BACKLIGHT
TIMER
SLEEP
MENU
BACK
FOLDER_UP
SELECT
FOLDER_DOWN
Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge
+
++
+ IR Remote Control Codes
IR Remote Control CodesIR Remote Control Codes
IR Remote Control Codes
(NEC Code)
Command Code
0x12
0x2D
0x02
0x0
3
0x0
4
0x0
0x0
6
0x0
7
0x0
8
0x0
9
0x0
A
0X0C
0x0
B
0x4D
0x2F
0x1A
0x2E
0x10
0x0E
0x0F
0x0D
0x11
0x17
0x13
0x16
0x1B
0x1C
0x1D
0x1E
0x1F
0x40
0x14
0x43
0x41
0x1
0x42
Tel: [phone] Fax: [phone] Web: www.cambridge
-audio.com
Command Code

Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge
The following commands
on this page
2.4 onwards.
(
To check software version, press and hold Source and Info buttons at the same time on the
front panel. Softw
are version will be displayed.
POWER_O
N
POWER_
OFF
MUTE_ON
MUTE_OFF
The following
commands are supported
provided on the remote control:
System Code = B0 4F
(NEC Code
Key
DAB
FM
CD
SD
USB
IPOD
AUX
Information in this document has been carefully checked for accuracy;
improvement, therefore design and specifications are subject to change without prior
free to email us at:
www.cambrigdeaudio.com/sts
This document contains
proprietary information protected by copyright. ll rights are reserved. No part of this
be reproduced by any mechanical, electronic or other means, in any form, without prior
© Copyright Cambridge udio Ltd 2008
Gallery Court, Hankey Place, London SE1 4BB England
Tel: [phone] Fax: [phone] Web: www.cambridge
on this page
are supported by One+ with software version
To check software version, press and hold Source and Info buttons at the same time on the
are version will be displayed.
)
0x00
0x44
0x19
0x4
commands are supported
by One+ (software version 2.4 onwards)
provided on the remote control:
(NEC Code
)
Command Code
0x01
0x46
0x47
0x48
0x49
0x4B
0x4C
Information in this document has been carefully checked for accuracy;
however, Cambridge udio's policy is one of continuous
improvement, therefore design and specifications are subject to change without prior
notice. If you notice any errors please feel
www.cambrigdeaudio.com/sts
proprietary information protected by copyright. ll rights are reserved. No part of this
be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer.
Tel: [phone] Fax: [phone] Web: www.cambridge
-audio.com
are supported by One+ with software version
To check software version, press and hold Source and Info buttons at the same time on the
by One+ (software version 2.4 onwards)
but not
Command Code
however, Cambridge udio's policy is one of continuous
notice. If you notice any errors please feel
proprietary information protected by copyright. ll rights are reserved. No part of this
document may
written permission of the manufacturer.