Cambro Camshelving Universal Storage Rack User manual

Camshelving®Universal Storage Rack
Assembly & Installation Guide
VIDEO GUIDE
Instructions
available in
multiple
languages
www.cambro.com
KIT PARTS TOOLS NEEDED
Starter Kit:
2 Rail Panels (C)
16 Rail Panel Brackets – 8 (A), 8 (B)
8 Traverse Brackets (D)
8 Metal Hex Head Bolts (E)
Add-On Kit:
1 Rail Panel (C)
8 Rail Panel Brackets – 4 (A), 4 (B)
4 Traverse Brackets (D)
4 Metal Hex Head Bolts (E)
OR
¾”(19 mm) Socket
Ratchet Wrench
Adjustable
Wrench
A B
C D E
COMPONENT

(C)
CLICK
(A)
(B)
✓
Step 1
Assemble 1 Rail Panel Bracket set.
(A and B)
Step 2
Snap Rail Panel Bracket set
into Rail Panel (C) Corner.
Step 3
Repeat Steps 1 & 2
for remaining 3
corners of Rail Panel.
INSTALLATION REQUIREMENTS
• 4 open dovetails between shelves
• NO shelf plates on traverses
• Open space between back of unit and wall: 3” - 5” (7,6 - 12,7 cm)

Brackets must be inside the Traverses.
4 X (D) 4 X (E)
Step 5
Slide Rail Panel to
one side/end.
Note: When installing on Elements®
Series shelving, the panels closest to
the posts will have a tighter fit. Preview
the assembly video (see page 1) before
starting the panel installation.
Step 6
1. Slide each Traverse
Bracket (D) onto Rail Panel
and Traverse.
2. Install Bolts into front
and back Brackets.
3. Adjust and straighten
Rail Panel.
4. Tighten Bolts with tool.
OR
Step 4
Place Rail Panel, pointing up,
between Traverses.

www.cambro.com D052201
CAMBRO EUROPEAN LOGISTICS
TEL: [phone]
FAX: [phone]
[email protected]
CAMBRO U.S.A.
TEL: [phone]
FAX: [phone]
[email protected]
CAMBRO IRELAND
TEL: [phone] Toll Free
FAX: [phone]
[email protected]
© Copyright Cambro Manufacturing Company. Printed in the U.S.A. 11/22
勘宝制造(惠州)有限公司
电话: [phone]
传真: [phone]
[email protected]
Step 7
1. Prepare next Rail Panel (Steps 1-3).
2. Install on Shelf Traverses (Steps 4 & 6).
3. Tighten Bolts just enough to hold
the rail panel upright on Traverses.
TIP: Inserting a tray, or pan, as illustrated, will more accurately determine
the distance needed between Rail Panels.
Step 8
1. Test fit with storage item
placed on top rails first.
2. Tighten top Bolts with tool.
3. Test fit with same storage
item on bottom rails and
adjust as needed.
4. Tighten all Bolts with tool.
OR
UMUNVR
REV A