Campbell CC640 User manual

INSTRUCTION MANUAL
Copyright © 2007
Campbell Scientific (Canada)Corp.
CC640 Digital Camera
August 2010

WARRANTY AND ASSISTANCE
This equipment is warranted by CAMPBELL SCIENTIFIC (CANADA) CORP. (“CSC”) to
be free from defects in materials and workmanship under normal use and service for
twelve (12) months from date of shipment unless specified otherwise. ***** Batteries
are not warranted. ***** CSC's obligation under this warranty is limited to repairing or
replacing (at CSC's option) defective products. The customer shall assume all costs of
removing, reinstalling, and shipping defective products to CSC. CSC will return such
products by surface carrier prepaid. This warranty shall not apply to any CSC products
which have been subjected to modification, misuse, neglect, accidents of nature, or
shipping damage. This warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability or fitness for a particular purpose. CSC is not
liable for special, indirect, incidental, or consequential damages.
Products may not be returned without prior authorization. To obtain a Return
Merchandise Authorization (RMA), contact CAMPBELL SCIENTIFIC (CANADA) CORP.,
at [phone]. An RMA number will be issued in order to facilitate Repair Personnel
in identifying an instrument upon arrival. Please write this number clearly on the outside
of the shipping container. Include description of symptoms and all pertinent details.
CAMPBELL SCIENTIFIC (CANADA) CORP. does not accept collect calls.
Non-warranty products returned for repair should be accompanied by a purchase order to
cover repair costs.

CC640 Table of Contents
PDF viewers note: These page numbers refer to the printed version of this document. Use
the Adobe Acrobat® bookmarks tab for links to specific sections.
1. Specifications ..............................................................1
2. Introduction..................................................................2
2.1 Connecting................................................................................................3
2.2 Configuring...............................................................................................4
2.3 Operating..................................................................................................4
2.4 Retrieving Images.....................................................................................4
2.5 Additional Reference Material..................................................................4
2.6 CC640 Quick Check List..........................................................................4
3. Camera Hardware Description ...................................5
3.1 Terminal Block Connections ....................................................................5
3.2 Power Switch............................................................................................5
3.3 Snap Button ..............................................................................................6
3.4 Setup Button.............................................................................................6
3.5 Video Output............................................................................................6
3.6 External I/O Connector.............................................................................7
3.7 LED (Green).............................................................................................7
3.8 Compact Flash Memory Card...................................................................8
3.8.1 Firmware Update from Memory Card...............................................8
4. Communications..........................................................9
4.1 PakBus Communications..........................................................................9
4.2 RS-232 Port............................................................................................10
4.3 CS I/O Port.............................................................................................13
4.4 RS-485 Port............................................................................................14
5. Device Configuration Utility......................................15
6. Operational Description ............................................19
6.1 Self Timed Mode....................................................................................19
6.2 External Trigger Mode ...........................................................................19
7. Image Quality .............................................................20
7.1 Lighting Conditions................................................................................20
7.2 Night Time Images .................................................................................20
7.3 Date and Time Stamp .............................................................................20
7.4 JPEG Compression.................................................................................21
8. Lens ............................................................................22
i

CC640 Table of Contents
8.1 Lenses and Field of View ...................................................................... 22
8.2 Focus and Zoom Adjustment................................................................. 23
8.2.1 Temperature and Variations and Focus.......................................... 23
8.2.2 Focusing Number (Displayed in Video Output)............................. 23
8.2.3 C2404 USB 2.0 Video Capture Cable with RCA Extension.......... 24
8.3 Lens Filter.............................................................................................. 27
9. Maintenance ...............................................................28
9.1 Lithium Battery...................................................................................... 28
9.2 Lens Cleaning ........................................................................................ 28
10. Setup and Interface Guide ......................................28
10.1 Trigger Mode....................................................................................... 28
10.1.1 External Trigger............................................................................ 28
10.1.2 Self-Timed Trigger....................................................................... 28
10.1.3 Combination of External and Self-Timed Triggers...................... 29
10.2 Communications .................................................................................. 29
10.2.1 Communications Disabled............................................................ 29
10.2.2 CS I/O Communications............................................................... 29
10.2.3 RS-232 Communications.............................................................. 30
10.2.4 RS-485 Communications.............................................................. 30
10.2.5 Concurrent Communications........................................................ 30
11. Power Calculations and Timings............................31
11.1 Standalone Operation........................................................................... 31
11.2 Operation with Communications ......................................................... 31
12. CR10X Interface Guide ............................................33
12.1 CR10X Datalogger Requirements ....................................................... 33
12.2 CR10X Memory Allocation................................................................. 33
12.3 CR10X PakBus Settings...................................................................... 33
12.4 CR10X *D15 Settings.......................................................................... 34
12.5 CR10X Multiple Cameras.................................................................... 34
12.6 CR10X Connections ............................................................................ 34
13. CR1000 Interface Guide...........................................34
13.1 CR1000 Memory Setup ....................................................................... 34
13.2 CR1000 Files Manager........................................................................ 34
13.3 CR1000 CS I/O Communications........................................................ 35
13.4 CR1000 RS-232 Port Communications............................................... 36
13.5 CR1000 COM Port (Control Port) Communications........................... 36
14. Remote Image Retrieval ..........................................36
14.1 LNCMD.EXE ...................................................................................... 37
14.2 Using LoggerNet File Control............................................................. 37
14.3 Task Setup / LNCMD.EXE ................................................................. 38
ii

CC640 Table of Contents
iii
15. Installation................................................................41
15.1 Enclosures.............................................................................................41
15.2 Mounting Holes....................................................................................41
Appendices
A. Camera Enclosure................................................... A-1
A.1 Preliminary Enclosure......................................................................... A-1
B. Quick Set Up and Test Procedure—
CC640 in Standalone Mode ................................. B-1
Figures
1. CC640 Camera............................................................................................2
2. Terminal Block Position and Layout..........................................................5
3. Camera to Datalogger RS-232 Port (DCE) Connection .............................9
4. Using C2006 Adapter Board to Carry RS-232 TX and RX on Multi-
Conductor Cable....................................................................................10
5. RS-232 Wiring using C2006 Boards with Multi-Conductor Cable..........11
6. Connections for Configuration.................................................................12
7. Camera Connections for CS I/O Port Operation ......................................13
8. Camera Connections for remote CS I/O Operations..................................14
9. Device Configuration Utility Screen ........................................................16
10. Illustration of Time Stamp Banner .........................................................21
11. Video Output with Focusing Number.....................................................24
12. USB 2.0 Video Capture Cable (extension not shown) ..........................25
13. Desktop Icons for GrabBee Software.....................................................25
14. GrabBee Software Application...............................................................26
15. General Tab of Option Page...................................................................26
16. Encoder Properties of Option Page.........................................................27
17. Lens and Filter........................................................................................27
18. Task Setup ..............................................................................................39
19. Task using Add After to Collect Images after Scheduled Call...............40
20. Mounting Holes......................................................................................41
A-1. Camera on the Enclosure Mounting Plate......................................... A-1
A-2. Preliminary Enclosure—Bottom View.............................................. A-2
A-3. Preliminary Mount Attached to a CM202 Crossarm......................... A-3
Tables
1. Recommended Cable Color Connections...................................................3
2. Explanation of Configuration Settings .....................................................17
3. Standalone Operation Power Usages........................................................31
4. RS-232 Port File Transfer Times and Power Usage per Image................32
5. CR10XPB CS I/O File Transfer Times ....................................................32
6. CR1000 CS I/O File Transfer Times........................................................32
This is a blank page

1
CC640 Digital Camera
1. Specifications
Power Supply
Operating: 9-15 VDC 250 mA Max
Quiescent: 250 uA typical
Operating Temperature -40°C to +70°C
Ext. Input Signal
Logic Low Level: 0 - 0.7 VDC (-12VDC Absolute Min)
Logic High Level: 4 – 15 VDC (15VDC Absolute Max)
RS-485
Max. BAUD Rate: 230.4 KBAUD
RS-232
Max. BAUD Rate: 230.4 KBAUD
CS I/O
Max. BAUD Rate: 76.8 KBAUD
CSDC addresses: 7 or 8
Memory Card Interface
Type: Compact Flash
File System: FAT16
File Type: JPEG
Size: 2GB or less supported
Clock Accuracy ±1 Minute/Year (0°C to 40°C)
±4 Minutes/Year (-40°C to 70°C)
Lens
Mount: CS-Type
IRIS: DC Compatible
Resolution 640 x 480 (307,200 pixels)
640 x 504 (with Time Stamp banner)
Dimensions
Length: 235 mm (9.25 inches) With Lens
Width: 110 mm (4.33 inches)
Height: 64 mm (2.52 inches)
Weight: 0.9 kg (2.0 lbs)

CC640 Digital Camera
2
2. Introduction
The CC640 digital camera was designed to meet the stringent operational
requirements necessary for remote battery powered installations. The CC640
has a very low quiescent power draw and can operate over a wide temperature
range.
The camera contains a compact flash memory card interface that turns the
camera into a powerful image logger. The combination of JPEG compression
and memory card storage enables the CC640 to store over 10,000 images.
The CC640 can operate in a stand-alone mode with image acquisitions
triggered by the cameras own precision real time clock. Image acquisitions can
also be triggered by an externally applied digital signal.
FIGURE 1. CC640 Camera

CC640 Digital Camera
3
2.1 Connecting
The camera should be connected to the datalogger and power supply using the
wiring recommendations in Table 1, Cable Color Connections. The wiring is
based on the use of the recommended 9721-L cable supplied by Campbell
Scientific, Inc. (CSI). The color connections may differ if other cables are
used.
It is essential that the Ground cable be connected first when
wiring the camera to the datalogger or the power supply.
TABLE 1. Recommended Cable Color Connections
Color Required Connections Recommended Signal Connection
Black Mandatory Ground
Red Mandatory +12V
Green Optional Ext
White N/A No connection or Ground
Yellow Optional RS-485 A or RS-232 TX (Camera Output)
Blue Optional RS-485 B or RS-232 RX (Camera Input)
Clear/Shield Mandatory Camera Shield Terminal
After connecting the camera to a power source, turn the power switch to the
ON position and verify the proper LED sequence before connecting the camera
for communication.
For Standalone Mode, the CC640 can be connected directly to the power
supply by wiring Ground first, and then +12VDC. Capturing images in
Standalone mode requires the use of a FAT16 formatted Compact Flash
Memory Card (Section 3.8).
The recommended cable for use with the camera is a 3 pair individually
shielded 24 AWG cable. The cable part number is L9721 and the Model
number for a finished cable is a 9721-L (L is the required Length). Only
shielded cable should be used with the camera for proper operation. It is
recommended to use the cable supplied by Campbell Scientific, as the cable is
of high quality and well suited for communications between the camera and
datalogger.
The individual conductor colors and their recommended connections are
outlined in TABLE 1. Following the recommended color scheme is not
mandatory and users may be required to select their own color schemes for
cables with different color arrangements.
The maximum recommended cable length of 24 AWG cable is 30 Meters (98.1
feet). Longer lengths can be used; however, a heavier gauge of wire is
suggested. It is recommended that the individual wire resistance on the
+12VDC and Ground conductors not exceed 2.7 Ohms. Using longer cable in
conjunction with RS-232 communications will require slower BAUD rates.
Depending on the cable length and type of cable, RS-232 may not be suitable
for communications and the use of RS-485 should be considered.
NOTE

CC640 Digital Camera
4
2.2 Configuring
The camera uses PakBus protocol to send image files to the datalogger and
both must be configured to enable communications. The RS-232 port is used
in conjunction with the Device Configuration software to change settings and
operating parameters in the camera (Section 5). Device Configuration Utility
is a free download from any Campbell Scientific website.
2.3 Operating
The CC640 is capable of acquiring images in a self-timed mode, an external
trigger mode, and by manually taking a picture using the Snap button (Section
3.3). Self-timed mode is set using the Device Configuration Utility, while a
short pulse applied to the Ext. Input Signal on the camera will initiate image
acquisition in the External Trigger Mode. When taking a picture manually
using the Snap button, the power switch needs to be in the ON position.
2.4 Retrieving Images
LoggerNet Version 3.1.3 or newer includes the executable LNCMD.EXE that
is required for image file retrieval from dataloggers (Section 14). Images from
cameras in standalone mode can be retrieved directly from the Compact Flash
Memory Card.
2.5 Additional Reference Material
The CC640 Operating Manual is intended for use by those experienced in
working with Campbell Scientific dataloggers. For further information
regarding the various uses and applications of the CR1000, CR10XPB,
CR23X, MD485, or any additional technology listed in this manual, refer to the
appropriate Operating Manuals of these products.
2.6 CC640 Quick Check List
•If interfacing to a datalogger, ensure that your datalogger has the
appropriate PakBus operating system.
•The compact flash memory card must be formatted to FAT16 (do not use
FAT32).
•Use the Device Configuration Utility to change settings in the camera.
•Use the Device Configuration Utility to change settings in MD485 or other
PakBus devices.
•The Device Configuration Utility can also be used to set the Dataloggers
memory and PakBus parameters. These parameters can be incorporated
into the datalogger program or changed with a Keyboard display.
•Verify that the lens cable is properly seated, as the connector may
inadvertently become unplugged during handling or installation.
Always ensure that the Power Switch is placed in the Auto Position.

CC640 Digital Camera
5
3. Camera Hardware description
3.1 Terminal Block Connections
Only shielded cable should be used for connections to the
terminal block.
Gnd Power Ground
+12 VDC 9-15 VDC Power, 250 mA
Ext. External Trigger Input, 5.0 Volt Logic Signal, 15 Volts Max
RS-485A RS-485 communications
RS-485B RS-485 communications
Shield The shield (drain wire) needs to be connected to this terminal
FIGURE 2. Terminal Block Position and Layout
3.2 Power Switch
The power switch can be used to power the camera continuously on or to place
the camera in Auto power mode. The switch should not be left in the On
position under normal operation. Leaving the switch in the On position will
prevent the camera from entering its low power quiescent mode of operation.
The power switch does need to be placed to the On position to perform
configuration setup or to focus the camera.
In the Auto position the camera will automatically reduce its power
consumption to the low power quiescent mode after an image is acquired. It is
NOTE

CC640 Digital Camera
6
recommended to place the switch in the Auto position when images are being
triggered by either the external input or the self-timed mode.
3.3 Snap Button
The Snap button is used to manually take a picture. The power switch needs to
be set to the On position for the Snap button to operate.
When the Snap button is pressed the LED will slowly flash 2 times, indicating
successful initiation of an image acquisition.
3.4 Setup Button
The Setup button performs 2 functions: it toggles the video output on or off
and it places the camera in setup mode. The power switch will need to be in
the On position for the Setup Button to operate.
When the Setup Button is pressed the LED will slowly flash once.
Pressing the Setup button will force the camera to its default BAUD rate
(115,200) on the RS-232 port for about 40 seconds so that the Device
Configuration Software can be used to configure the camera. Image
acquisitions will also be placed on hold for the same time period. To indicate
that the camera is in Setup mode the LED will briefly flash once per second.
If no configuration communications occur during the 40 seconds, the camera
will exit setup mode and resume its normal operating mode. The LED will
flash once every 5 seconds.
Pressing the Setup Button will toggle the Video output on or off. The video
output is used to focus and target the camera in conjunction with a normal
television or laptop monitor. A USB 2.0 video capture cable and 6 foot RCA
extension can be purchased separately from Campbell Scientific Canada, in
order to interface the CC640 to a laptop or PC (part number C2404). The
video output will remain on until the setup button is pressed to toggle it off.
The video output will be turned off when the camera enters its quiescent mode,
5 minutes after the camera’s power switch has been placed in the Auto
position.
3.5 Video Output
The video output connector provides an analog video signal for the purpose of
focusing and targeting the camera. The video output can be configured to
NTSC (National Television System Committee) or PAL (Phase Alternating
Line) using the Device Configuration Software. NTSC is the standard used in
North America and PAL is the standard that is used in most European
countries. Consult your monitor owner’s manual for display information.
The video output signal is intended for use with a television or monitor that has
a NTSC or PAL video input. Most monitors will have one or two audio input
connectors in addition to the video input. The audio inputs should remain
unconnected, as the camera does not have audio capability.
The video output can be turned on and/or off by pressing the Setup Button
when the power switch is in the ON position.

CC640 Digital Camera
7
During every image acquisition sequence the video output will be momentarily
activated when the image is acquired, allowing the operator to view the image
that is being captured.
3.6 External I/O Connector
The External I/O connector provides Inputs and Outputs for operating camera
peripherals, such as the optional motorized enclosure that is used for operation
under extremely harsh environmental conditions. Please contact a Campbell
Scientific sales representative for details and availability of the CC640
peripherals.
The Ext. (External Control) input signal can be used to initiate an image
acquisition. An image acquisition can be initiated on demand by applying a
voltage pulse to the Ext. input. The camera will remain in its quiescent state
when the signal to this input remains at logic low (Less that 0.7 Volts). To
initiate an image acquisition the input should be pulsed high (4.0 - 15 Volts).
The recommended duration of the pulse is between 1ms and 10 seconds.
Leaving the Ext. input signal high for more than 10 seconds will result in
another image acquisition starting immediately after the completion of the first.
If the Ext. input signal is left in the High state continuously, the camera will
not enter its low power mode and images will be acquired on a continuous
basis.
The Ext. Control Input signal is operated with the power switch in the Auto
mode. If the power switch is left in the ON position the LED will flash twice
and begin an image acquisition when a positive Ext Signal is detected,
providing easy confirmation of an externally applied signal.
3.7 LED (Green)
The green LED is intended to provide feedback for the operator. On power up
the LED will slowly flash 4 times, indicating that a normal power-on sequence
has occurred. If the LED flashes rapidly for several seconds, it means that the
camera failed one of the power-on tests. This response is rare and will require
that the camera be returned to an authorized repair facility.
The LED will also flash once if the Setup button is pressed and twice if the
SNAP button is pressed. During communications or a firmware update the
LED will remain ON to indicate a process is in progress that should not be
interrupted.
If the power switch is in the ON position the LED should flash once every 5
seconds to indicate that it is running. If the setup button is pressed, the LED
will briefly flash once a second to indicate that the camera is ready for setup
using the Device Configuration Utility.

CC640 Digital Camera
8
The following table offers LED information at a glance:
LED
Always Off The camera has no power connected to it or it is in
Quiescent Mode
Quick Flash
Every 5 Seconds The camera is Powered ON (Power switch is in the ON position)
4 Slow Flashes Normal Power-On Sequence
Rapid Flashes
for 4 Seconds A Power on test did not pass.
Quick Flash
Every Second The camera is in Setup Mode
Steadily On The camera is carrying out a process that should not be
interrupted. This includes acquiring an Image, transmitting
an image via communications, or performing a firmware
update.
3.8 Compact Flash Memory Card
The camera is equipped to use compact flash memory cards. It is important for
the memory cards to be formatted as FAT16 and not FAT32, as the camera
does not support the FAT32 file system. When formatting a memory card
using a PC ensure that FAT32 is not selected (FAT16 or just FAT should be
used).
Image files are stored on the compact flash memory card as JPEG files under
the root directory “IMAGES”. Each file will be uniquely named with a
sequence number (i.e. E1234567.JPG).
The compact flash card should not be inserted or removed while the camera is
in its ON state. Insertion or removal should only be done when the camera is
in its quiescent state or when power is removed.
The use of a memory card is optional and is not required for users who utilize
communications to retrieve the images. If a card is present, the camera will
write the images to it. Once the memory card is filled, the camera will stop
recording images to it unless deleting previous files creates additional image
storage space. It is generally recommended to delete older image files from the
memory card after downloading them to a permanent storage location.
3.8.1 Firmware Update From Memory Card
Failure to properly follow this procedure can result in
corruption of the operating system. If this occurs, it may be
necessary to send the camera to an authorized repair
facility to have the operating system reloaded.
The compact flash card is also used to provide a means of updating the
camera’s embedded firmware. This is done by downloading the appropriate
files from any Campbell Scientific website, renaming the new firmware hex
file as “NEWCODE.HEX” (all upper case), and placing it in the root directory
of the compact flash memory card. When the camera powers up and finds the
file in the root directory it will begin to update its firmware from the file. The
CAUTION

CC640 Digital Camera
9
LED will remain continuously on during this process, which may take up to 5
minutes. It is imperative that the power supply is not interrupted during
this process. After completion the LED will turn off. Power down the
camera, remove the memory card, and delete the “NEWCODE.HEX” file using
a PC if no other cameras need to be updated. Leaving the file on the memory
card will cause the camera to repeatedly update its firmware every time the
camera wakes up from its quiescent mode.
4. Communications
4.1 PakBus Communications
The camera uses the PakBus protocol to send image files from the camera to
the datalogger or other PakBus compatible devices.
Communications are not enabled while the camera is in its quiescent mode.
This is done to conserve power in its low power state. When an image file is
ready to be transmitted, the camera will initiate communications and send the
JPEG image via the selected PakBus port.
The camera is a PakBus Leaf node and is not capable of performing any
routing.
FIGURE 3. Camera to Datalogger RS-232 Port (DCE) Connection

CC640 Digital Camera
10
4.2 RS-232 Port
The 10-pin RS-232 header connector is designed to provide a 9 Pin DCE type
port by using either of the ribbon cable adapters provided with the camera.
Part number C1946 provides a male 9-pin connector and C1947 provides a
female 9-pin connector.
The RS-232 port can also provide an additional communication port for
transmitting image files to a datalogger using the PakBus Protocol. Figure 3
illustrates the required connection to a RS-232 port on a Datalogger. A
Datalogger and camera are both DCE type RS-232 devices; thus, requiring a
NULL modem cable.
FIGURE 4. Using DB9M-TERM Adapter Board to Carry RS-232 TX and RX on Multi-Conductor Cable
The necessary RS-232 TX (transmit) and RX (receive) signals can also be
carried by the recommended 6 conductor cable. Figure 4 demonstrates using a
DB-9 to terminal breakout board (part DB9M-TERM) and the standard cable
to transmit the RS-232 signals. This provides a practical means of carrying the
RS-232 signals when the camera is installed remotely from the datalogger.
If the recommended cable is used, the RS-232 can be used at distances up to 30
Meters (98.1 feet). Longer lengths or different cables may require that the
BAUD rate be set slower than the default 115200 BAUD.

CC640 Digital Camera
11
FIGURE 5. RS-232 Wiring using DB9M-TERM Boards with Multi-Conductor Cable
Depending on the datalogger the wires can be terminated directly on the
control ports or another DB9M-TERM adapter board can be used to provide a
9-pin connector at the datalogger end (see Figure 5).

CC640 Digital Camera
12
FIGURE 6. Connections for Configuration
The RS-232 port is used in conjunction with the Device Configuration software
to change settings in the camera such as the PakBus addresses. Figure 6
illustrates the connections required for interfacing to a computer.

CC640 Digital Camera
13
FIGURE 7. Camera Connections for CS I/O Port Operation
4.3 CS I/O Port
The CS I/O port on the camera provides a connector for CS I/O
communications. The port is designed to communicate with Campbell
Scientific dataloggers equipped with CS I/O communication ports. A ribbon
cable assembly (C1946) is used to provide a male 9-pin connector that can plug
directly to the CS I/O port or to a SC-12 cable that connects to the CS I/O port
(See Figure 7). The CS I/O port is used to download image files to the
datalogger. The image files can then be collected remotely in conjunction with
the regular data.
The camera will support only Concurrent Synchronous Device
Communications (CSDC) and will not support Modem Enabled (ME)
Communications. The camera can be assigned one of two CSDC addresses, 7
or 8. If another CSDC device is connected to the CS I/O port, then the camera
must have an address that is different from the other device.
The CS I/O port cable lengths should be restricted to 12 feet or less to ensure
optimal operation.

CC640 Digital Camera
14
FIGURE 8. Camera Connection for remote CS I/O operation
When connecting the CS I/O remotely a second fin6cond is needed. 9 pin
connections need to be made for pins 2, 3, 4, 6, 7, and 9. Colour is not
important, just that the above listed pins of the DB9M-TERM at the CC640 go
to the corresponding pins of the DB9M-TERM at the logger end.
4.4 RS-485 Port
The RS-485 terminals can be used in conjunction with the MD485 to interface
a datalogger to the camera over distances of up to 4000 feet. The +12V GND
and EXT control lines cannot be practically run these long distances. Normally
the RS-485A and RS-485B lines, and an additional ground connection, are run
these distances. Refer to the MD485 manual for additional information.

CC640 Digital Camera
15
5. Device Configuration Utility
The Device Configuration Utility can be used to set the clock on the camera as
well as other operating parameters such as the PakBus addresses.
Using The Device Configuration Utility
•Connect an appropriate power supply to the camera.
•Connect the RS-232 cable to the camera and the computer.
•Turn the Power switch to the “ON” position.
•Press the Setup Button (this temporarily forces the RS-232 port to
115KBAUD).
•Within 40 Seconds invoke the Device Configuration Utility (Figure 9).
•Select CC640 as the device and connect to the camera.
•Table 2 offers further information on configuration settings.