CanCom BLUE-X XBX-300MK User manual

CanCom Sales Inc.
[email protected]
tel [phone] fax [phone]
toll free 855.533.5677
The CanCom BLUE-X XBX-300MK is a Blue-
tooth Microphone kit that allows the use
of your choice of earphone (3.5 mm plug)
for our series of two-way radio adapters
and dongles. Built in PTT button with vol-
ume UP/DOWN buttons. Embedded 3.5
mm jack is compatible with iPhone ear-
phone and many other listen-only kits/
headsets.
Dimension: 65mm X 30mm X 12mm
Temp: -10℃±2℃~ 50℃±2℃
Approx. Weight: 21.6g
(External earphone is excluded)
 Fully Qualified Bluetooth v4.1
 Echo cancellation, noise reduction and
extended features
 High Quality DAC
 80MHz RISC MCU and 80MIPS Kalimba
DSP
 SBC, MP3, AAC, Fast stream, APTX co-
dec support
 RoHS compliant
 HFP profile supports
 PTT function: built-in
 Talking Range: Bluetooth class 2, 10
meters
 Display LED: Blue and Red
 Power: Max 4dB
 Sensitivity: -90dB
 DC Input: 5 Vdc (std.)
 Standby Current: 6mA
 Battery: 190mAH
 Standby Time: 50 hours
 Talk Time: 10 Hours

1. Make sure XBX-300MK is OFF. Press power switch and hold for 6 seconds
2. When the XBX-300MK is under pairing mode you will see RED/BLUE led flashing.
3. Start Bluetooth function on your smart phone or two-way radio.
4. After you hearing connect sound, press Connection Key button once (Kenwood only)
5. Pairing process is completed.
NOTE: The XBX-300MK is only for connection to one radio. When you paired with new
radio the old one will be erased.

3 Progress Drive, Unit 8B
Orillia, Ontario L3V 0T7
www.cancomradioaccessories.com
© CanCom Sales Inc. 2020
LED STATE STATEMENT
BLUE LED ON : 2 sec off : 1 sec repeat All Profiles are standby but not connected to device yet
BLUE LED FLASH : every 2 seconds HFP is connected
BLUE LED & RED LED : Alternate FLASH repeat Enter PAIRING mode
RED LED ON Battery CHARGING
RED LED OFF Battery FULL
BUTTONS STATEMENT
Power Switch hold (>= 1 second) Device ON
Power Switch hold (>= 2.5 seconds) Device OFF
Power Switch long hold (> 6 seconds) Enter pairing mode from power OFF
Connection key Single Press Connection (to Kenwood only)
VOL + short press Volume UP
VOL - long hold (>=0.8 seconds) Volume DOWN Continuously
VOL - short press Volume DOWN
VOL + long hold (>=0.8 seconds) Volume UP Continuously
The CanCom BLUE-X XBX-300MK allows the use of
3.5mm stereo plugs. Two options we offer are
the following…
XBX-XLAS-3.5S (Acoustic Tube Listen-Only Kit) and
the XBX-XLAF-3.5S (Flip-style "over-the-ear" Speak-
er/Earhook)