C&T PC400 Series User manual

PC400 Series
PC Module

PC400 / PC410 l User’s Manual
Table of Contents
Prefaces …………………………………………………….……………………………………………. 04
Revision …………………………………………………………………………………………..……………….……….. 04
Disclaimer ………………………………………………………..…….…….………………………….……………….. 04
Copyright Notice …………………………………….…………………….…………………………………………… 04
Trademarks Acknowledgment …………..………………………………………………………...................04
Environmental Protection Announcement …………………………….………………….……………….. 04
Safety Precautions ………………………………………….……………………………….…………….………….. 05
Technical Support and Assistance …………………………………….…………….…………….…………….06
Conventions Used in this Manual ………………………………………………………………….….………..06
Package Contents …………………………………………………………………………………………….…………07
Ordering Information …………………………………….……………………………………….……….………… 07
Optional Accessory …………...……………………………………..................................................... 07
Chapter 1 Product Introductions ………………………………………………………..… 08
1.1 Overview ……………………….………………………………..………….………………..……….. 09
1.1.1 Key Feature ………….……………………………………….……….…..………..…....... 09
1.2 Hardware Specification ….………………………….....…………….…………..…..………… 10
1.3 System I/O ……………………………..……………………..…………………………………..…… 11
1.3.1 PC400 …………………………………......................……………………………….…… 11
1.3.2 PC410 …………….………………………………………………………………..…………... 13
1.4 Mechanical Dimension …………………………..…………………………..………….………. 16
1.4.1 PC400 …………………………………......................…………………………………… 16
1.4.2 PC410 …………………..……….………………………………………………..…………... 17
Chapter 2 Switches and Connectors ……..…………………………………………..…. 18
2.1 Switch and Connector Locations ……………………………………..…….…..……..….... 19
2.1.1 Top View ……………………………………………………………………....……………… 19
2.1.2 Bottom View ……………………………………………………………………....……….. 20
2.2 Connector / Switch Definition ……………………………….……….…….………............ 21
2.3 Switch Definitions ………….…………….............................................................. 22
2.4 Connector Definitions …………………………...................................................... 24
Chapter 3 System Setup ……………………..………………………………………..……… 33
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing. ……….………………………………………………………………………………….... 34
3.2 Installing SODIMM …………………………………………………………………………………... 34
3.3 Installing mini PCIe card / mSATA ……………………………………….…………………... 35
3.4 Installing HDD on removable SATA HDD bay …………………………….……………... 36
3.5 Installing Cfast card ………………………………………………………………………………… 38
3.6 Installing SIM card ……………………………………………………………….………………….. 39
3.7 Connecting PC module with VIO display module ……………………..……………... 41
2

PC400 / PC410 l User’s Manual
3
Chapter 4 BIOS Setup ……………………………………………….…………….…………… 43
4.1 BIOS Introduction …….……….…………………………………..….…….…..…..…………... 44
4.2 Main Setup ……..……….………………….…………………………..….….……….………...... 45
4.3 Advanced Setup ………………………………………………………………………….………….. 46
4.3.1 CPU Configuration ……………………………..…………….………….….….….….... 47
4.3.2 PCH-FW Configuration ……..………………………………..…..…..……….………. 48
4.3.3 SATA and RST Configuration …………………………….…………………………... 48
4.3.4 RST (UEFI RAID) Configuration ……………………………………….……….….... 49
4.3.5 Trusted Computing …………………………………....……..………………..…...... 51
4.3.6 ACPI Setttings ……………………………..……………….………….….…………….... 51
4.3.7 Super IO Configuration ..……………………………..…………..………............. 52
4.3.8 Hardware Monitor ……..………………………………..…………………….…….... 55
4.3.9 Serial Port Console Redirection ………………………………………..…...….... 56
4.3.10 Stack Configuration ……………………………………………………………………. 56
4.3.11 CSM Configuration …………………………………………………………….………. 57
4.3.12 USB Configuration …………………………………………………….……….………. 58
4.4 Chipset …………...……….………………….…..….…..………………..…………………...….... 59
4.4.1 System Agent (SA) Configuration ……………………………..………………….. 59
4.4.2 PCH-IO Configuration ………….………………………………………………….….... 61
4.5 Security …………...……….………………….…..….…..………………………………..…….….. 64
4.6 Boot …………...……….….………………….…..…………………………..…………..…………... 65
4.7 Save & Exit …...……….….………………….…..….…..…………………………..…………...... 66
Appendix WDT & GPIO …………………………………………….……………………….…… 67
WDT Sample Code …….……………………….…….……………..….…….……….……….... 68
GPIO Sample Code …………………………………………………………………………..……. 69

PC400 / PC410 l User’s Manual
4
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. C&T
Solution Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading.
The information in this document is subject to change without notice and does not represent a
commitment on the part of C&T Solution Inc.
C&T Solution Inc. disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of C&T Solution Inc. Copyright © C&T Solution Inc.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2019/08/13
Preface

PC400 / PC410 l User’s Manual
5
Safety Precautions
Before installing and using the equipment, please read the following precautions:
Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
The power outlet shall be installed near the equipment and shall be easily accessible.
Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
of power could ruin sensitive components. Make sure the equipment is properly grounded.
When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
Avoid the dusty, humidity and temperature extremes.
Do not place heavy objects on the equipment.
If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
The storage temperature shall be above -40°C and below 85°C.
The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface

PC400 / PC410 l User’s Manual
6
Technical Support and Assistance
1. Visit the C&T Solution Inc website at www.candtsolution.com where you can find the latest
information about the product.
2. Contact your distributor, our technical support team or sales representative for technical support if
you need additional assistance. Please have following information ready before you call:
Model name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
Conventions Used in this Manual
Preface
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury.
WARNING
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
CAUTION
This indication provides additional information to complete a task easily.
NOTE

PC400 / PC410 l User’s Manual
7
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Item
Description
Q’ty
1
P4300 Series PC Module
1
2
Utility DVD Driver
1
3
Screw Pack
1
Preface
Ordering Information
Model No. Product Description
PC400-7300U PC Module for Industrial Display System with Intel® Core™ i5-7300U Processor
PC400-7100U PC Module for Industrial Display System with Intel® Core™ i3-7100U Processor
PC410-7300U PC Module for Industrial Display System with Intel® Core™ i5-
7300U Processor,
1x Universal I/O Bracket
PC410-7100U PC Module for Industrial Display System with Intel® Core™ i3-
7100U Processor,
1x Universal I/O Bracket
Optional Accessories
Model No. Product Description
1
-E09A06007
Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch
SFICBL022
Power Cord, 3
-pin US Type, 180cm
1
-TPCD00002
Power Cord, European Type, 180cm
1
-TPCD00001
Power Cord, 3
-pin UK Type, 180cm

Chapter 1
Product Introductions

PC400 / PC410 l User’s Manual
9
1.1 Overview
The PC400 series PC module is based on 7th Gen. Intel® Core™ i5-7300U (up to 3.5GHz) / i3-7100U
(2.4GHz) Dual Core processor. It supports Multi-Mode Display Module (MDM) technology which makes
it more flexible in system maintaining and upgrading. It also offers modularize expansion I/O, rich
connectivity interfaces, wide range (9~50VDC) DC power input, and high reliability even operating in
temperature extremes (-40~+70 ° C).
Featuring with completely cable-less designed and high functional, PC400 series are ruggedized display
systems that can operate in harsh environments and easy to install and maintain. A build in over
voltage protection (OVP), over current protection (OCP), reserve voltage protection, and wide range DC
power input makes PC400 series are safety system for all industrial applications.
Chapter 1: Product Introductions
1.1.1 Key Features
Intel® 7th Gen (Kaby Lake-U) Processor Core™ i5-7300U up to 3.5GHz / Core™ i3-7100U, 2.4 GHz
1x 260-pin DDR4 SODIMM. max up to 16GB
1x 2.5” SATA HDD bay support RAID 0, 1
1x mSATA (shared by 1x Mini PCIe), 1x CFast (shared by 1x mSATA), 2x SIM socket
2x full-size mini PCIe for communication or expansion modules
2x LAN, 1x VGA, 1x DisplayPort, 1x Dual Channel 24 bit LVDS
4x RS-232/422/485, 4x USB 3.0, Audio
8x DI + 8x DO with isolation
1x Universal I/O Bracket for Expansion (PC410 Only)
9 to 50VDC wide range power input
-40°C to 70°C extended operating temperature

PC400 / PC410 l User’s Manual
10
1.2 Hardware Specification
Chapter 1: Product Introductions
Processor System
•7th Gen Intel® Core™ i5 / i3 Processor with AMI 128Mbit
SPI BIOS
-Intel® Core™ i5-7300U Processor, Dual Core, 3MB
Cache, up to 3.5 GHz
-Intel® Core™ i3-7100U Processor, Dual Core, 3MB
Cache, 2.4 GHz
Memory
•1x 260-Pin DDR4 1866/2133MHz SODIMM. Max. up to
16GB
Display
Triple Display
•1x VGA
•1x DisplayPort
•1x Dual Channel 24 bit LVDS
Expansion
•2x Full-size Mini PCIe Socket for Wi-Fi / GSM / Expansion
Module
•1x Universal I/O Bracket (PC410 only)
Ethernet
•1x Intel® i219LM GbE LAN Port, Support Wake-on-LAN
and PXE
•1x Intel® I210-AT GbE LAN Port, Support Wake-on-LAN
and PXE
Audio
•Codec: Realtek ALC888S
•1x Mic-in and 1x Line-out
Watchdog Timer
•Software Programmable Supports 1~255 sec. System
Reset
Storage
•1x Removable 2.5" SATA HDD Bay, support RAID 0, 1
•1x mSATA (shared by 1x Mini-PCIe)
•1x Cfast (shared by 1x mSATA)
•2x External SIM Card Socket
I/O Ports
•4x USB 3.0 Port
•8x Isolated DI and 8x Isolated DO Port
•4x External DB9 for COM1~4, Support RS232/422/485
with Auto Flow Control
•2x Internal COM5~6, Support RS232/422/485 with Auto
Flow Control (PC410 only)
•3x Antenna Hole (PC400 only)
•4x Antenna Hole (PC410 only)
•1x AT/ATX Switch
•1x Remote Power on/off Connector
Digital Input & Output
•8x Digital Input (Source Type)
- Input Voltage (Dry Contact):
Logic 0: Close to GND
Logic 1: Open
- Input Voltage:
Logic 0: 3V max.
Logic 1: 5V min. (DI to COM-)
•8x Digital Output
- Supply Voltage: 5~30VDC
- Sink Current: 200 mA Max. Per Channel
Power
•Support AT, ATX Mode
•1x 3-pin Terminal Block Connector with Power Input
9~48VDC
•Power Ignition Sensing
•1x Optional AC/DC 12V/5A, 60W Power Adapter
Environment
•Operating Temperature: Ambient with Air Flow:
-40°C to 70°C (with Industrial Grade Peripherals)
•Storage Temperature: -40°C to 85°C
•Relative humidity: 10%~95% (non-condensing)
Physical
•PC400 Series
- Dimension (WxDxH, mm): 246 x 220 x 42mm
- Weight: 1.57 kg
•PC410 Series
- Dimension (WxDxH, mm): 246 x 220 x 64mm
- Weight: 1.86 kg
•Construction: Extruded Aluminum with Heavy Duty
Metal
•Mounting: VESA Mounting Holes 75 x 75mm, 100 x
100mm
Operating System
•Windows 10
•Linux kernel 4.X
Certifications
•CE
•FCC Class A