Candy Light SLIDE User manual

BLUETOOTH RGB LED MODULE GUIDE

2
DOWNLOAD THE APP
FIRST CONNECTION
RESTART A PRODUCT
4
5
6
6
6
8
10
11
GROUPS MENU
MOODS MENU
PROGRAMMING MENU
BASIC FEATURES
DEVICE MENU

MANAGING AND DELETING A DEVICE
ANDROID/IOS APP NOTIFICATIONS
OPTIONS MENU
13
16
18
22
20
ADDITIONAL FEATURES
FAVORITES MENU
13
13
MANAGING AND DELETING A GROUP
MANAGING AND DELETING AN EVENT
USE OF ACCESSORIES 23
KEY MESH 23

4
iPhone 5 et +
iPad 3eand 4egén., Air
iPad Mini and Mini Retina
iOS9 and +
Samsung Galaxy S6, S7, S8
Samsung Galaxy Note
Google Nexus 4, 5, 6, 7
Android 5.0 and +
DOWNLOAD THE APP
Update
CANDYLIGHT BLUETOOTH is
a complete system of connected
devices.The application updates
to accept all the new available
tools. All remarks to improve the
ergonomics of the latter will also
be taken into account in its
development.
COMPATIBLE WITH COMPATIBLE WITH
SEARCH: SLIDEDESIGN SEARCH: SLIDEDESIGN

5
Once the button «pair an object» is selected, your Bluetoo-
th device should briey ash green and the pairing process
displays on the screen of your smartphone or tablet. Once
past these two steps you will see your device in the list
located above the pairing button.
Then in order to build your network you simply have to re-
peat the task for all your Candylight Bluetooth products.
When using the application for the rst time, you will be redirected to
the page allowing you to connect your phone or tablet to your Bluetooth
devices. Mobile GPS has to be activated.
In order to connect your rst Bluetooth device and start building your
network simply press the function «pair a device» ensuring that your
device is located close to the smartphone (1.5 m in general, but this
distance also depends on the quality of your phone or tablet’s Bluetooth
transmitter). In general, the shorter the distance, the faster the pairing.
FIRST CONNECTION

6
A procedure can be used to restart the products. If the user loses
their smartphone or a device is not working properly for some reason
despite a properly charged battery, simply follow the procedure
below to restore the device to factory settings. (Note: it will also
probably be necessary to delete the device causing the issue in the
device listing in your smartphone’s application. Please refer to the
additional functions for this procedure).
Once the process is complete, your device should ash according
to the rotation of the next color: red, green, blue, white.
NOTE: If you just click 1 second, the color of the LED will change.
RESTART A PRODUCT
BASIC FEATURES
DEVICE MENU
The «Devices» menu enables individual control of all Bluetooth
products previously added to your smartphone network.
By clicking and dragging the side selectors you can initially
simply turn on or o󰀨 a product to its original color.
You will then have access to advanced settings by pressing the
icon. By default, this accesses the «color» tab, which enables
the setting of predened colors in the precision palette as well
as the light brightness level.
CANDY LIGHT
LP RGB100
Input: 5V 3A 300 lumen
IP44 Made in PRC
RGB multicolor LED
www.slidedesign.it
? ?
?
Reset
1S1S3S10S
FR
EN
IT
ON
blanc
ON
white
ON
bianco
couleurs
color
rolling
colori
arotazione
OFF Réinitialisation
Reset
OFF
OFF
BATTERY CHARGER JACK
POWER BUTTON

7
Note
The zone opposite, located above the color
palette allows you to turn o󰀨 the device,
switch to candle mode or access an overview
of the pre-dened color on the palette.
In addition to the «Color» tab, the ‘Mood’ and ‘White’ tabs can
adjust the shade of hot/cold white according to various prede-
ned brightness levels or moods such as Zen, Romantic,
Rainbow.

8
BASIC FEATURES
It is of course possible to create custom groups as required. For
example, you can create groups corresponding to areas of the
house, or even groups corresponding to certain types of
products.
Group management is limited only by your imagination.
GROUPS MENU
The menu «Groups» enables product control as a group. The list
has a default group «All», enabling the management of all Bluetooth
products added to the network via the user’s smartphone. In the
same manner as for a single product, it is possible to access a
precise setting of the group’s color or mood by clicking on the
icon.

9
To create a custom group, simply press the «Create a group» button to rst choose a name for this new group. Once the group has
been created and named you just add Bluetooth products to the group by simply pressing the button corresponding to the product
in the module selection list.
Note however that a module added to the group successfully would normally briey ash green. In addition, the application should
display a conrmation message. Once the customized group has been set up, it is possible to access the specic control of colors
and moods using once again the icon.
BASIC FEATURES

10
BASIC FEATURES
MOODS MENU
It has previously been described that a single module or group
containing several modules could receive commands according
to colors or moods. The moods are predened color settings
corresponding to the following names: Autumn, Winter, Zen,
Romantic, Rainbow and Blink.
By accessing the Mood menu tab you can change these
predened color settings, in order to adjust them according to
your own tastes.
Simply access the mood menu, for example press the color choice
eyedropper icon for the autumn or winter mood. You can now
modify the shade via the horizontal settings bar, then press save
to validate your new settings.
Note
When you change your mood settings like this, you
have access to a preview of the new color at the top
right of your screen.

11
BASIC FEATURES
PROGRAMMING MENU
The programming menu enables the creation of events managing
actions of turning on and o󰀨 Bluetooth modules over time. For
example, you can program an event to automate the switching on
and o󰀨 of lamps for a certain period of time during waking, or a
night based program.
The conguration of an event is very comprehensive, since it
denes the following criteria:
- Choice of a custom name for the event
- Choice of the day of the week concerned by this event
- Choice of a start time for the launch of the event
- Choice of an end time for stopping the event.
- Activation of the «repeat» mode to obtain repeatability of the
event over time
- Choice of the Bluetooth devices a󰀨ected by this event
- Choice of colors or moods for the devices concerned by the event
Name
Set the time at which the
event nishes
Ending time of event the
following day
Activate event repetition
Days of the week
Create a waking event
First go to the ‘Programming’ tab and press the «Create an
event» button. You can then rename the event, and begin
its conguration.

12
BASIC FEATURES
PROGRAMMING MENU
After having determined all options related to the days of the week, time
slots, as well as potential repetitions it is now necessary to access the
bottom of the settings page and press the menu button «Groups/devices».
Once this button is pressed, you can select the devices that will be
activated in the event.
When activating a device, the application switches directly to the color and
moods choice menu in order to dene how the devices will light up during
the programmed start of the event. Once the color setting has been carried
out, simply press the apply «button».
After pressing the «Apply» button,
the successful programmed
message appears, you can then
repeat the operation several times
for all the modules you want to add
to the event.
Once the addition of devices is
complete, press the ‘Create’ button
and note the appearance of the
new event in the ‘My programs’
menu, meaning that it should take
place according to the earlier
dened settings.

13
ADDITIONAL FEATURES
FAVORITES MENU
When you enter the color scheme menu corresponding to an
individual module (from the «Devices» menu), or corresponding
to a group (from the Groups menu), you can press the ‘Star’ button
in order to select a single module or a group as Favorite.
Once the button is pressed, the «Star» symbol normally switches to a
darkest intensity (by default the symbol has no color ll).
Once your favorite modules or
groups have been added to your
«Favorites» menu, you can
quickly access their ON/OFF
switch.
Note
The Favorites menu
cannot currently be used
to modify modules and
group colors, simply their
switching on or o󰀨.
DEVICE MANAGEMENT
When you are in the «Devices» menu, you can press the «Cong»
button, the gear wheel symbol then appears next to the device
name. You will then have the possibility to change the name of
the device, check that there is no necessary update for your
product, and nally access various technical information such
as the software version or even the Bluetooth device address.
Certainly, in addition to updates of your SLIDE application
available directly on the download portal corresponding to your
smartphone (Google Playstore or Apple Appstore), an internal
software update of your devices may also be available.

14
ADDITIONAL FEATURES
You can also choose from
deactivate the buttons on your
application. If selected, your
device will no longer react to the
pressure of physical buttons (on the
Candy light) but only to the SLIDE
app.
A user could no longer change the
ignition routine chosen in the app
by pressing the buttons on your
device.
If you receive, for example,
guests a little too curious, this
option is for you. Be aware that it is
possible to turn o󰀨 and reset the de-
vices with its buttons following the
procedure detailed in «restart a
product» .
DEACTIVATE THE BUTTONS
DEEP SLEEP
If you do not want to use a device for a long time you can also
decide to put it to sleep for save your battery. Indeed, even when
they are not lit, the devices consume battery.
By putting them to sleep, your devices will not consume power
until you wake them up. For that, it is enough that you press one
of the buttons of the device. You can then use again your device
from the mobile application.

15
ADDITIONAL FEATURES
DELETING A DEVICE
When you are in the «Device» menu, press the «Cong» button, the
red-circle symbol appears to the left of the device name in order to delete
it from your network.
When a device is removed from the Bluetooth network you should see
it ashing briey in red, a delete message appears on the screen of your
smartphone then the module disappears from the device list.
Note
To remove a device in the best possible condition it is
important to ensure that it and your smartphone are
currently connected to your network, and therefore
the device in question is now controlled via your
smartphone application.
If these conditions are met, the removal of your Bluetooth
module from your network should be carried out
without any problem.

16
ADDITIONAL FEATURES
MANAGING A GROUP
When you are in the «Groups» menu, you can press the «Cong»
button and then the gear wheel symbol next to the group name.
Once in the group modication
menu, it is possible to modify
the group name or to modify
its content simply by adding or
removing modules in the
corresponding list.
Once the modications are
complete, just press the «OK»
button to validate the changes
and return to the main screen
of the group menu.
If you wish, you can delete a device when it or your smartphone are not
connected to your network. This may happen, for example, if your
smartphone is not located close enough to at least one of the devices in
your network, or if the battery of the module you want to delete is simply
empty.
In this case, the module removal procedure launched after pressing the red
icon should not succeed, however, the application should indicate that
your product could not be found or removed from the network but you
can press a button to
remove it locally. This involves the removal of the device from your
smartphone application list.
Be aware that the device will no longer appear in your SLIDE application
list, however the product itself will remain locked, with only the old
connection information in its memory. In its current state the product will
not be connectable and before you can add it back to a network via your
SLIDE application, the device restart operation as described earlier in the
user guide will be required.

17
ADDITIONAL FEATURES
DELETING A GROUP
To delete a group, you must rst access the management menu of
the group to be deleted. To do this, simply go to the «Groups» tab and
then press the «Cong» button and then the gear wheel icon.
Once the management menu of a group is open, you just have to
uncheck the activated modules inside the group.
Once all the modules have been deactivated, press the «OK» button
to validate the deletion of all the devices inside the group and
consequently delete the group from the list.

18
ADDITIONAL FEATURES
MANAGING AN EVENT
When you are in the «Programming» menu, you have the option
of pressing the zone corresponding to the name of the event in
order to access the event settings. By default the application tells
you to rst remove the devices from the list of modules a󰀨ected
by the event in order to make changes to the settings of days or
hours.
Once you have made the changes to the conguration of the event,
you can add modules to the list of devices concerned, and dene the
color or mood they must comply with when they are switched on.
After making all these changes simply press the «Save» button to
validate the changes and return to the screen listing the events stored
in your SLIDE application.

19
ADDITIONAL FEATURES
DELETING AN EVENT
When you are in the «Programming» menu, you have the option of pressing the area corresponding to the name of the event in order to
access the settings of the event. In the same way as for deleting a group, deleting an event simply requires disabling all the devices in the
list of modules concerned by the event and then pressing the «Save» button, the application switches to the «Programming» menu and you
will note that the event has been removed from the list.

20
ADDITIONAL FEATURES
OPTIONS MENU
You can press the «Settings» button located at the top left and
symbolized by three black horizontal bars to access the «User
Preferences» menu and then press the «Settings App» button.
Thanks to the App settings menu you can access the version number
of your SLIDE application or change the language of the interface.
The pairing distance indicates
how far your smart device can
be when rst connecting to a
SLIDE product.
The default range will be, on
average, 2 meters, but this
depends on your smart device
and the environment (other
products in the same
frequency, walls or other
obstacles).
Finally, the «Reset» button returns to the default settings of the
application for the above parameters, but it also removes all modules,
groups, events and favorites.
Warning
If you delete your modules via the «Reset» button, be aware
that in the same way as for a «Local» deletion of your
module, it will be necessary to follow the restart procedure
before any other pairing.