Candy CMCJ644TPWIFI User manual

FRANÇAIS
ENGLISH
Table de cuisson Induction
Instructions Manual For Induction Hob
ITALIANO
Manuale di istruzioni per piano di cottura ad induzione
ESPAÑOL
Manual de instrucciones de la encimera de inducción
SLOVENŠČINA
Navodila za uporabo za indukcijsko kuhalno ploščo
CMCJ644TPWIFI

Direct Cook
4

Direct Cook
Direct Cook
When switching on the hob “PA” will appear.
If you want to enroll your hob – please follow the enrolling
step from the quick start guide.
If you don’t want to enroll your hob – touch Direct_cooK
(chef) _ for more than 2 seconds.

• You can pause the heating instead of shutting the hob off.
• When entering the Pause mode, all the controls except the ON/OFF control are disabled.
Pause Mode
• You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
Locking the Controls
• it is possible to set a maximum power absorption level for the induction hob, choosing up to different
power ranges.
• induction hobs are able to limit themselves automatically in order to work at lower power level, to avoid
the risk of overloading.
Power Management Function
To enter pause mode
Short touch the Timer “ ” and Timer ” ” at the
same time.
All the indicator will show “ 11“
To exit pause mode
Short touch the Timer “ ” and Timer ” ” at the same time.
When the hob is in the pause mode, all the controls are disable except the ON/OFF , you can always turn the induction hob
off with the ON/OFF control in an emergency. The hob will shut down after 10min if you don’t exit the pause mode.
When the hob is in the lock mode, all the controls are disable except the ON/OFF , you can always turn the induction hob
off with the ON/OFF control in an emergency, but you shall unlock the hob first in the next operation.
To lock the controls
Touch and hold the Timer “ ” and Timer ” ”
at the same time for a while.
The timer indicator will show “ Lo ”
To unlock the controls
Touch and hold the Timer “ ” and Timer ” ” at the same time for a while.
To enter Power Management Function
Turn on the hob, then Press at the same time the
Jolly function control and Timer ”
”.
The timer indicator will show “ P5“ which means
power level 5。The default mode is on 7.0Kw。

To switch to another level
press +/- of the timer
or
There are 5 power levels, from “P1” to “p5”. The
timer indicator will show one of them.
“P1” : the maximum power is 2.5Kw.
“P2” : the maximum power is 3.5Kw.
“P3” : the maximum power is 4.5Kw.
“P4” : the maximum power is 5.5Kw.
“P5” : the maximum power is 7.0Kw.
Confirmation and Exit Power Management Function
Press at the same time Jolly function control and
Timer ”
” for confirmation.
Then the hob will be turned off.
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when
the set time is up.
• You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99min.
Timer control
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not
selecting any cooking zone.
Touch “+” the controls of the timer. The minder
indicator will start flashing and “10” will show
in the timer display.
Set the time by touching the “-” or “+” control
of the timer
Hint: Touch the “-” or “+” control of the timer
once to decrease or increase by 1 minute.
Touch and hold the “-” or “+” control of the timer to decrease
or increase by 10 minutes.
Touching the “-” and "+” together, the timer
is cancelled, and the “00” will show in the minute
display.
12

b) Setting the timer to turn one or more cooking zones off
Set one zone
Touching the heating zone slider control
Set the time by touching the or control of the timer
Hint: Touch the “-“ or “+” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+”control of the timer
will decrease or increase by 10 minutes.
Touching the “-” and “+” together, the timer is cancelled, and the
“00” will show in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows “- - “ when the setting time finished.
Other cooking zone will keep operating if they are turned on previously.
13

set more zones:
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
(set to 15 minutes)
(set to 45 minutes)
Once the countdown timer expires, the corresponding zone
will switch off. Then it will show the new min. timer and
the dot of corresponding zone will flash.
The shown as right:
(set to 30 minutes)
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
14

15
The base diameter of induction cookware
Cooking zone
1 & 2 140
140
180
1803 & 4
Minimum Maximum
Flexi zone 250 400
The above may vary according to the size of the pan and the material it is made from.

16

17
Parameter
Wireless Standard
Frequency Range
Max Transmit Power:
Maximum Receiving Sensitivity
Channel
Specifications
802.11b/g/n
2.412GHz-2.484GHz
+16 2dBm
-87dBn
13 channels
+
_

18
Product information for networked equipment
Power consumption of the product in
networked standby if all wired network
ports are connected and all wireless
network ports are actived:
How to active wireless network port:
How to deactivate wireless network port:
2W
If the hob has been enrolled with the
APP, turn on the hob to activate
wireless network port.
If the hob has been enrolled with the
APP, turn off the hob to deactivate
wireless network port. If the hob
hasn't been enrolled with the APP,
wireless network port will be
deactivated even the hob is on

Energy consumpon for cooking zone or area calculated per kg
19