Candy CTS 102 User manual

WASHING MACHINE CANDY CTS 102
APROGRAMME/TEMPERATURE SELECTOR
B1SPIN SPEED SELECTOR
B2WASH TEMPERATURE SELECTOR
C1EASY IRON
C2 EXTRA RINSE
HSTART/STOP KEY
pCONTROL POSITION INDICATOR
A B 1 B 2
C1C2H p

Table of programmes mod. CTS 102
Mains
voltage
Wash
power
rating
Spin
power
rating
Pump
motor
power
rating
Heating
element
power rating
Max.
power
input
Mains
fuse
amp. rating
Water
pressure
Water
consumption
* prog.
EN 60456
Energy
consumption
* prog.
EN 60456
230 V. /
50 Hz.
175 W. 340 W. 30 W. 1950 W. 2200 W. 10 A. 0,05-0,8
Mpa
54 L. 1,04 Kw/h.
* Programme as per EN 60456
Technical data mod. CTS 102
170
140
134
80
54
30
7
95
86
72
43
4
63
54
48
34
4
4
32
1000
1000
1000
1000
1000
1000
1000
800
800
800
800
800
400
800
800
800
800
800
5,5
5,5
5,5
5,5
2
2
2
1,5
1
1
90º
90º
60º
40º
60º
50º
40º
40º
40º
30º
programme programme for
aprox.
time
min.
Máx. temp.
setting
ºC
Máx.
spin
speed
Máx.
load
kg
Washing powder load Option keys C
1. fast coloureds with prewash
2. fast coloureds
3. * fast coloureds
4. delicate coloureds
bleach/whitener
vigorous rinse
vigorous spin
5.mixed synthetics
6.coloureds
7.acrylics
gentle rinse
gentle spin
8. delicates
woolmark woollens
hand wash
gentle rinse
gentle spin
empty
fast 32 min.
III
COTTON
MIXED /SYNTH.
DELICATES
SPECIAL
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Tu rn the programme selector (A) to the desired programme. (clokwise).
4.- Press the key or keys for any options desired (C1, C2).
C1: easy iron key
This function helps reduce creasing, depending on the programme selected and the type of
fabric washed. This works as follows:
Mixed,Synthetics. Intermediate spins during rinses are eliminated, the final spin is a gentle spin.
Delicates. Intermediate spins during rinses are eliminated and the machine stops before the
final spin, which is a gentle spin.
Hand wash, Woollens and Cotton. The machine stops before the final spin.
Rinses. Intermediate spins during rinses are eliminated, the final spin is a gentle spin.
To complete the wash cycle in the Delicates , Hand wash , Cotton, and Woollens programmes,
press the Easy Iron key again: the machine will empty and perform the required spin.
To empty machine of water with no spin, cancel the ongoing programme and select the Empty
programme
C2: extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water and
a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can
be activated in Cottons, Mixed, Synthetics, Delicates, and Rinses programmes.
5.- Select spin speed if required (B1)
B1 spin selector
Use this control to select the maximum spin speed within the range for the model of washing
machine in question and the programme selected (see programme table). The control can be
turned in both directions. Spin speed may be selected at any time during the programme.
6.- Select wash temperature if required (B2)
B2 temperature selector
Use this control to select the wash temperature within the range for the programme selected
(see programme table).
The control can be turned in both directions. Select the required temperature before starting
the programme.
7.- Once you have selected the desired options, press the START key (H). The washing machine
will start up .
To cancel an option after setting, just press the option key again.

To change or cancel a programme once the programme selected has started, proceed as follows:
- Press the key (H). The programme has been cancelled, and another may be selected.
- Select the new programme.
- Press (H) again.
- The machine will then run the new programme selected
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Hold down the key (H). When the door lock disengages (after approx. 2 minutes), open the
door and put the additional washing into the drum.
- Close the door and press (H) again.
- The machine will continue with the programme.
END OF PROGRAMME
For safety’s sake, set the programme selector or the on/off key to OFF when the programme
ends.
17-03-2005 / 46001803 / EN