CANNICE Padblue 1 User manual

Padblue 1 INSTRUCTION
HANDING WIRELESS
MUSIC PHONE

ACCESSORIES
USB cableEarphoneEar caps

①
②
③
④
⑤
⑥
⑦
OVERVIEW
※ Make sure you have read the operating instruction manual and security
announcements to ensure the proper use of the bluetooth headset.It's strongly
recommend that this user manual should be kept properly for future reference.The
pictures in the manual only used for description,the real prodcut might be different
from it in the pictures.
① 3.5mm connect jack
② Dustproof receiver
③ Talking mic
④ Multifunction button
⑤ Status indicator
⑥ Volume +/-
⑦ Charge jack

The Bluetooth headset comes with the chargeable battery that can't be
disassembled inside.Make sure the headset is fully charged before first time
using.
Connect headset to a USB charger or USB port of computer, it takes about 1.5
hours to fully charged, the indicator flashes blue once fully charged.
CHARGING
※ Please don't plug in and pull out the AC charger frequently while charging, to
avoid the shortening life time of the bluetooth headset
1. How to turn on the bluetooth headset?
While the headset is in turned-off status,long press the multifunction button
for about 4 seconds,the blue indicator flashes 4 times ,after this the bluetooth
headset is turned on and will be in standby status.
TURN ON OR TURN OFF THE HEADSET
※ Ensure there is enough power before using the bluetooth headset.
2. How to turn off the bluetooth headset?
While the headset is in turned-on status,long press the multifunction button
for about 4 seconds,the red indicator flashes 1 time ,after this the bluetooth
headset is turned off and will be in turned-off status.

Pairing program allows the encrypted wireless connection between the 2
bluetooth devices and begin to communicate with each other.please make
sure the operating range of the 2 bluetooth devices within effective range
before pairing.
PAIR AND CONNECT TO THE BLUETOOTH HEADSET
How to pair?
Long press the multifunction button for about 7 seconds till the red and
blue indicators start flashing alternately,the bluetooth headset now in
pairing mode the headset will be searchable within 2 minutes.
Enable the mobile phone bluetooth function and search for the bluetooth
headset(please refer to the mobile phone user manual)
Select the bluetooth headset displayed as Padblue1 among the
bluetooth device list.
Please input 0000 to finish pairing if bluetooth PIN code is required.
※ No need to input the PIN code if the device support fast pairing function.

—— ——
——
——
——
——
Press volume + and - buttons
simultaneously once ——
—— ——
—— ——
Mute On/Off
Volume up
Volume down
Previous song
Press and hold the volume-
button for 2 seconds
Press and hold the volume +
button for about 2 seconds
Press the volume+ button
Press the volume- button
Press and hold the volume-
button for about 2 seconds
BASIC OPERATION
Function
Operation LED status Alerts
Answer a call Press any key to answer
the call
Blue With continuous
alerts
End a call Press the multifunction button
once
Reject a call
Press and hold the volume +
or volume- button for about 2
seconds
With beep alerts
Last number
redial Double - press the
multifunction button
Voice dial (Need
phone support)
Switch between
phone and headset
Next song Press and hold the volume+
button for about 2 seconds
Music pause/play
Press the multifunction button
once
—— ——
—— ——
—— ——
—— ——
—— ——

Function
Operation LED status Alerts
——
Turn off the headset, press
Volume + and - simultaneously,
then connect headset to a USB
charger, release + and - after
4 seconds.
The blue indicator
flashes for 3 times
Turn on headset, it connects to
the last paired device
automatically
Turn on the headset, press and
hold multifunction button, then
connect headset to a USB
charger, release multifunction
button after 2 seconds once
LED flashes red.
Headset
hardware reset
Clear paired
devices list
Connect to last
paired device
automatically
Battery low alerts
The red indicator
flashes once every 8
seconds
Beep 3 times
continuously
every 30 seconds
The blue indicator
flashes continuously
for 4 times
With beep alerts
Turn off
automatically
The headset will turn off
automatically when no
activity for 3 minutes to
save power
—— ——
—— ——
——

FAQ
Q: Can the bluetooth headset be connected with the laptop,PC or PDA?
A: The device that support the bluetooth version and function can be
connected with the headset.
Notes: Please refer to the user manual of the laptop,PC and PDA devices.
Q: What devices will affect the quality of calls?
A: The quality of calls may be affected by the wireless devices, electrostatic
noise will occurs commonly,please keep the bluetooth headset away from the
radio waves electrical appliances,in order to prevent interference
Notes: Please be aware of the position of the devices making radio waves
during phone calls with bluetooth headset.
Q: Will my phone conversation be listened by other bluetooth mobile phones?
A: The radio-frequency power of bluetooth is far lower than regular mobile phone
signal power,so the bluetooth signal is hard to be monitored by the third party
device.Because after bluetooth headset connected with the mobile phone,a
secure connecting will be built between the headset and the device.
Q: How should I clean my bluetooth headset?
A: Please use dry and soft cloth to clean it.
Notes: Please keep the cloth dry and soft.

Q: The bluetooth headset can't be power on..
A：1) Headset is out of power. please recharge.
2) If step 1 fail. Press the multifunction button for 4 seconds to power on the
headset.
3) If step 2 fail. Reset headset refer to headset hardware reset. then press
the multifunction button for 4 seconds to power on the headset.
Q: The bluetooth headset can't be power off.
A：1) Wrong operation. Press and hold the multifunction button for 4 seconds.
2) If step1 fail. Reset headset refer to headset hardware reset.
Q: The bluetooth headset can not be searched.
A：1) Restart headset to pairing mode, pair and connect headset refer to
PAIR AND CONNECT TO THE BLUETOOTH HEADSET.
2) If step1 fail. Reset headset refer to headset hardware reset. Repeat step 1.
Q: Some of the function descriped in user manual are not available.
A: Different connected devices have different functions.For instance,when
the bluetooth headset connected with PDA,and MP4 and other devices.If the
headset is multipointed,Some features need devices (connected to headset)
support
Q:When I clip the headset on the clothes,the voice would be weak to the
other end point.
A:the headset position is too far from the voice source.

Do not throw,impact,scrape,screw,hit or vibrate the headset,don't place
heavy things on it.
Keep the headset away from magnets,electronics and loudspeaker.
Keep the headset away from the extreme temperature(working
temperature range -10℃～45℃).
Keep the headset away from the moist environment.
Do not disassemble the bluetooth headset.
Touch the button smoothly.
Do not clean your headset with the corrosive cleanser.
NOTES & TIPS
BATTERY INFORMATION
The electricity of the Bluetooth headset is provided by the inner battery.
Do not connect the headset with the charger if unnecessary or fully charged.
overcharge will shorten the battery life. the headset power will release
automatically after fully charged with or without using. Do not put the headset in
the place where the temperature is too high or too low.For instance, leave the
headset in a locked car in summer.That will shorten its capacity and life.
※Keep the battery temperature between 15℃ and 25℃ otherwise too hot or too
cold may affect its performance. Do not throw it to fire to avoid explosion. Please
recycle the invalid batteries correctly.