Canon FaxPhone L120 Safety guide

CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126, U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO.,LTD
15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District, 100020, Beijing, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FA7-7804 (010) 062005NF © CANON INC. 2005 PRINTED IN KOREA
ENG
Starter Guide
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place for future reference.

Set Up the Machine
Do You Have Everything?
Before Setting Up the Machine Manuals for the Machine
●Remove all shipping tape on the machine.
●Always hold the bottom when you lift the
machine.
●The machine illustration may differ slightly from
your machine.
●Starter Guide (This Document): Machine set-up and software installation
●Basic Guide: Basic features
●Advanced Guide (in User Software CD): Advanced fax features, status monitor, and reports and
lists
●Software Guide (in User Software CD): Driver set-up and printing from a computer
Assistance:
If you have a problem with your machine and you cannot solve it by referring to the manuals listed
above, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center
at 1-800-828-4040 between the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and
10:00 A.M. to 8:00 P.M. on Saturday.
●Machine ●Cartridge ●Power Cord ●Telephone Cable
●Destination Labels
●Starter Guide
●Basic Guide
●User Software CD
●Limited Warranty Notice
●Cartridge Warranty Notice
●Handset ●Plugs with Pins●Handset Cradle
1 2

3
Install Cartridge
1
Remove the cartridge from the bag.
Keep the bag for future use. CAUTION
Do not open the drum protective shutter (A).
2
Gently rock the cartridge several times to distribute
toner inside.
3
Pull out the seal completely.
NOTE
Do not pull out the seal at an angle.
4
Open the document feeder tray.
5
Open the cartridge cover by the notch (A).
6
Hold the cartridge by its handle (A).
7
Insert the cartridge in the machine as far as it will
go. The arrow (A) on the cartridge should be facing
away from you and pointing down.
8
Push down the cartridge to make sure it is properly
set in the machine.
9
Close the cartridge cover.
NOTE
Be careful not to get your fingers caught.
10
Open the paper delivery tray (A) and the extension
(B).
A
AA
A
BA
4

5
Load Paper
Load Paper
1
Lift the paper stack cover and pull it out completely.
NOTE
Make sure the back end of the cover does not catch the
front paper guide.
2
Pinch and slide the side paper guides to the size of
paper.
3
Pull out the paper guide rail as far as it will go.
4
Fan the paper stack and even the edges.
5
Insert the paper stack print side up.
NOTE
Make sure the stack height does not exceed the limit
mark (A).
6
Push back the paper guide rail to the front edge of
paper. NOTE
– If loading paper shorter than Letter, pinch and slide the
front paper guide (A) to match the paper size.
– If loading paper other than Letter, make sure to set the
correct paper size in the machine. (See Chapter 3,
“Print Media,” in the Basic Guide.)
7
Insert the paper stack cover.
NOTE
Make sure the back end of the cover does not catch and
lower the scanning platform (A).
8
Pull out the document delivery tray (A) and the
extension (B).
Do not open or close the document delivery tray
extension without extending the document delivery
tray first.
A5 B5
EXEC LTR
LGL
A4
A
A
A
BA
6

7
Connect Telephone Cables and Install Handset
Connect Telephone Cables Install Handset
Connect the supplied telephone cable to the line jack (A) and the wall jack.
Connect the handset cable to the handset jack (C).
Connect any external device to the external device jack (B) if required.
1
Use a screwdriver to remove the covers on the left
side of the machine.
2
Insert the plugs with pins (A) into the holes on the
handset cradle.
NOTE
Do not insert the pins all the way into the plugs at this
point.
3
Insert the plugs (with the cradle) into the holes on
the machine.
4
Carefully push the pins into the plugs as far as they
will go.
5
Place the handset on the cradle.
6
Hook the handset cable on the retainer (A) at the
back of the machine to retain the slack.
NOTE
If using the handset or an external telephone, make sure
to set the fax receive mode to <FAX/TEL>, <MANUAL>,
or <DRPD>. For instructions on how to set the receive
mode, see “Set the Receive Mode,” on p. 16.
C
A
B
A
A
8

9
Connect Power Cord
Connect Power Cord
1
Connect the power cord into the rear socket and
the wall outlet to turn on the machine.
2
The machine enters the standby mode.
What if...
●<CARTRIDGE COVER OPEN> is displayed:
Make sure that the cartridge cover is closed properly.
(See “Install Cartridge,” on p. 3.)
●<NO TONER CARTRIDGE> is displayed:
Make sure that the cartridge is installed properly.
(See “Install Cartridge,” on p. 3.)
●<PAPER SIZE ERROR> is displayed:
Make sure that Letter-size paper is loaded in the machine. (See “Load Paper,” on p. 5.)
If you loaded paper other than Letter, make sure to set the correct paper size in the machine.
(See Chapter 3, “Print Media,” in the Basic Guide.)
16:00 STD 100%
-SET DOC.- FAX ONLY
10

11
Set the Machine for Sending Faxes
Register Sender Information
The sender information you register in the machine appears in the header of each page received by your
recipient.
NOTE
Before sending a fax, you MUST register your fax number, user name, and the current date and time in the machine.
Entering Information
Use the following buttons to enter information in the machine.
You can enter the following characters in each input mode:
●Use the numeric buttons to enter characters.
Press the numeric button repeatedly until the
required character appears.
●Press [#] to enter spaces or symbols.
●Press [ ] to switch between input modes:
– [A]: Letter mode
– [1]: Number mode
●Press [Left/Right] to move the cursor.
●Press [Clear] to delete the character at the
cursor position. Hold [Clear] to delete the entire
entry.
●Press [Set] to confirm the entry.
MAY.06.2005 P.001/003
THE SLEREXE COMPANY LIMITED
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX [phone]
Our Ref. 350/PJC/EAC
#0001YOUR NAME012345678917:30
Date Time User
Fax Number
User Name Session
Number
Page Number
#
213
546
879
0
Stop/Reset
Clear
Start
ABC DEF
JKL MNO
TUV WXYZ
GHI
PQRS
SYMBOLS
Directory Coded Dial
Hook
FAXPHONE L120
Tone
OPER
Add.Mode Menu
Image Quality
Redial Pause
Status Copy
Set
[Set]
Numeric Buttons
[Left/Right]
[Clear]
[] [#]
12

13
●Entering Information
– Numeric buttons: Enters letters and numbers.
– [ ]: Switches letter and number input modes.
– [Up/Down]: Scrolls through the setting menu.
– [Left/Right]: Moves the cursor position.
– [Clear]: Deletes the character at the cursor position, or the
entire entry if held for more than one second.
Register Sender Information
1Press [Menu]. 2Use [Up/Down] to select
<USER SETTING?>, then
press [Set].
3Use [Up/Down] to select
<1 DATE&TIME?>, then
press [Set].
4Use the numeric buttons
to enter hour (in 24-hour
format), minute, year,
month, and day, and press
[Set] twice.
5Use [Up/Down] to select
<2 USER FAX NO.?>,
then press [Set].
6Use the numeric buttons
to enter your fax number
(up to 20 digits), then
press [Set] twice.
7Use [Up/Down] to select
<3 USER NAME?>, then
press [Set].
8Use the numeric buttons
to enter the user name (up
to 32 characters), then
press [Set].
Press [#] to enter a space.
9Press [Stop/Reset] to
return to standby mode.
Set the Telephone Line Type
1Press [Menu]. 2Use [Up/Down] to select
<COMM.SETTING?>,
then press [Set].
3Use [Left/Right] to select
the telephone line type,
then press [Set].
<TONE>: Tone dialing (default)
<PULSE>: Pulse dialing
– The selected item is preceded by
an asterisk ( ).
4Press [Stop/Reset] to
return to standby mode.
#
213
546
879
0
Stop/Reset
Start
Clear
ABC DEF
JKL MNO
TUV WXYZ
GHI
PQRS
SYMBOLS
Directory Coded Dial
Hook Set
FAXPHONE L120
Tone
OPER
Add.Mode Menu
Image Quality
Redial Pause
Status Copy
[Menu]
[Up/Down]
[Left/Right]
[Set]
[Stop/Reset]
Numeric Buttons
[]
[Clear]
17:01 ’05 05 06
SET HOUR (YES=SET)
Ex.
=0123_
YES=SET
Ex.
NAME=CAN
OK= [A]
Ex.
14

15
Set the Machine for Receiving Faxes
Select the Receive Mode that Suits Your Needs
Follow the chart below to determine the right receive mode for your needs.
NOTE
– The answering machine must be connected directly to the machine for <AnsMode> to work.
– Voice mail is not supported with <AnsMode>.
– The <DRPD> mode requires subscription to a DRPD (Distinctive Ring Pattern Detection) service. Contact your telephone
company for availability.
Do you intend to connect a third-party
external telephone to the machine? No <FAX ONLY>
Answers all calls as faxes and
disconnects voice calls.
Do you intend to use an answering
machine with the machine?
Yes <AnsMode>
Receives faxes automatically
and records voice messages.
Do you intend to receive faxes
automatically?
No <MANUAL>
Does not answer any call.
You have to manually receive
faxes.
<FAX/TEL>
Switches between fax and
voice calls automatically.
Yes
No
Yes
Do you subscribe to a DRPD service? No
<DRPD>
Distinguishes between fax and
voice calls.
Yes
Set the Receive Mode
1Press [Menu]. 2Use [Up/Down] to select
<RX SETTING?>, then
press [Set].
3Use [Up/Down] to select
<5 RX MODE?>, then
press [Set].
4Use [Left/Right] to select
the receive mode, then
press [Set].
The selected item is preceded by an
asterisk ( ).
NOTE
For <AnsMode>, make sure an
answering machine is
connected to the machine.
5Press [Stop/Reset] to
return to standby mode.
NOTE
For details on setting the receive
mode, see Chapter 1, “Advanced
Fax Features,” in the Advanced
Guide (in User Software CD).
16

17
Install the Printer Driver
Installation Procedure
Before Installation: System Requirements
Microsoft Windows 98/98SE
CPU: Intel 80486DX/66 MHz or faster
Memory: 24 MB or more
Available Hard Disk Space: 355 MB or more
Microsoft Windows Me
CPU: Intel Pentium/150 MHz or faster
Memory: 32 MB or more
Available Hard Disk Space: 295 MB or more
Microsoft Windows 2000 Professional
CPU: Intel Pentium/133 MHz or faster
Memory: 64 MB or more
Available Hard Disk Space: 655 MB or more
Microsoft Windows XP (32-bit version)
CPU: Intel Pentium/Celeron series 300 MHz or
faster
Memory: 128 MB or more
Available Hard Disk Space: 1.5 GB or more
12
If the L120 CD-ROM Setup
screen is not displayed, on the
Windows desktop, double-click
[My Computer]. Open the CD-
ROM icon, then double-click
[Mlnst (Mlnst.exe)].
3
• Do not connect the USB cable before installing the
software. If you connect the USB cable before
installing the software and the Found New Hardware
Wizard screen appears, click [Cancel].
• For Windows 2000/XP, log on as Administrator to
install the software.
• Make sure the machine is turned on before connecting
the USB cable.
• On the screen shown at each step, click on the circled
button to proceed.
456 789
10
Connect the machine and your
computer with a USB cable (A).
11 12 13 14
You have now completed
machine set-up.
Canon and FAXPHONE are
registered trademarks, and UHQ
is a trademark of Canon Inc.
Microsoft and Windows are
registered trademarks of
Microsoft Corporation.
All other product and brand
names are registered
trademarks, trademarks or
service marks of their respective
owners.
Specifications subject to change
without notice.
A
18