Canon Ir4570 series User manual

Oct 8 2004

Service Manual

iR4570/3570, 2870/2270 Series

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and

repair of products. This manual covers all localities where the products are sold. For this reason, there may be

information in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.

When changes occur in applicable products or in the contents of this manual, Canon will release technical information

as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will

issue a new edition of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered trademarks of the individual companies.

reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

Printed in Japan

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Introduction

Symbols Used

This documentation uses the following symbols to indicate special information:

Symbol Description

Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning.

Indicates an item requiring care to avoid electric shocks.

Indicates an item requiring care to avoid combustion (fire).

Indicates an item prohibiting disassembly to avoid electric shocks or problems.

Indicates an item requiring disconnection of the power plug from the electric outlet.

Indicates an item intended to provide notes assisting the understanding of the topic in question.

Indicates an item of reference assisting the understanding of the topic in question.

Provides a description of a service mode.

Provides a description of the nature of an error indication.

Memo

REF.

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Introduction

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical

and mechanical systems with reference to the timing of operation.

　In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol ,

the arrow indicates the direction of the electric signal.

　The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the

delivery unit door, which results in supplying the machine with power.

2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is "High", while '0' is used to

indicate "Low".(The voltage value, however, differs from circuit to circuit.) In addition, the asterisk (*) as in

"DRMD*" indicates that the DRMD signal goes on when '0'.

In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the

operations of the microprocessors used in the machines are not discussed: they are explained in terms of from

sensors to the input of the DC controller PCB and from the output of the DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for product improvement or other

purposes, and major changes will be communicated in the form of Service Information bulletins.

All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant

Service Information bulletins and be able to identify and isolate faults in the machine."

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

Chapter 1　Introduction

1.1 System Construction.......................................................................................................................................... 1- 1

1.1.1Overview of the System with a Delivery Accessory................................................................................... 1- 1

1.1.2Delivery Accessory System Configuration 1 .............................................................................................. 1- 1

1.1.3Delivery Accessory System Configuration 2 .............................................................................................. 1- 3

1.1.4Delivery Accessory System Configuration 3 .............................................................................................. 1- 5

1.1.5Pickup/Original Handling Accessories System Configuration ................................................................... 1- 6

1.1.6Reader Heater System Configuration.......................................................................................................... 1- 8

1.1.7Cassette Heater System Configuration 1..................................................................................................... 1- 9

1.1.8Cassette Heater System Configuration 2................................................................................................... 1- 10

1.1.9Side Deck Heater System Configuration................................................................................................... 1- 11

1.1.10Printing/Transmitting Accessories System Configuration ...................................................................... 1- 12

1.1.11List of Print Transmission Optional Functions ...................................................................................... 1- 13

1.2 Product Specifications..................................................................................................................................... 1- 15

1.2.1 Names of Parts .......................................................................................................................................... 1- 15

1.2.1.1 Names of Parts................................................................................................................................... 1- 15

1.2.1.2 Cross Section..................................................................................................................................... 1- 16

1.2.2 Using the Machine .................................................................................................................................... 1- 19

1.2.2.1 Turning On the Power Switch ........................................................................................................... 1- 19

1.2.2.2 When Turning Off the Main Power Switch ...................................................................................... 1- 20

1.2.2.3 Control Panel ..................................................................................................................................... 1- 22

1.2.3 User Mode Items....................................................................................................................................... 1- 23

1.2.3.1 Common Settings .............................................................................................................................. 1- 23

1.2.3.2 Setting the Time ................................................................................................................................ 1- 28

1.2.3.3 Adjustments and Cleaning................................................................................................................. 1- 28

1.2.3.4 Report Output .................................................................................................................................... 1- 28

1.2.3.5 System Control Settings .................................................................................................................... 1- 29

1.2.3.6 Copy Settings ................................................................................................................................. 1- 32

1.2.3.7 Transmission/Reception Settings　................................................................................................. 1- 32

1.2.3.8 Box Settings....................................................................................................................................... 1- 35

1.2.3.9 Printer Settings .................................................................................................................................. 1- 35

1.2.3.10 Address Book Settings .................................................................................................................... 1- 37

1.2.4 Maintenance by the User........................................................................................................................... 1- 39

1.2.4.1 Cleaning............................................................................................................................................. 1- 39

1.2.4.2 Inspection .......................................................................................................................................... 1- 40

1.2.5 Safety ........................................................................................................................................................ 1- 42

1.2.5.1 Safety of the Laser Light ................................................................................................................... 1- 42

1.2.5.2 CDRH Regulations............................................................................................................................ 1- 42

1.2.5.3 Handling the Laser Unit .................................................................................................................... 1- 43

1.2.5.4 Safety of Toner.................................................................................................................................. 1- 43

1.2.6 Product Specifications .............................................................................................................................. 1- 44

1.2.6.1 Product Specifications....................................................................................................................... 1- 44

1.2.7 Function List ............................................................................................................................................. 1- 46

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

1.2.7.1 Printing Speed....................................................................................................................................1- 46

1.2.7.2 Printing Speed....................................................................................................................................1- 48

1.2.7.3 Types of Paper ...................................................................................................................................1- 49

Chapter 2　Installation

2.1 Making Pre-Checks ...........................................................................................................................................2- 1

2.1.1Selecting the Site of Installation .................................................................................................................2- 1

2.1.2Before Starting the Work (230V) ................................................................................................................2- 3

2.2 Unpacking and Installation ................................................................................................................................2- 8

2.2.1Unpacking and Removing the Packaging Materials....................................................................................2- 8

2.2.2Installing the Toner Bottle...........................................................................................................................2- 9

2.2.3Installing the Drum Unit............................................................................................................................2- 10

2.2.4Securing the Copier Main Unit..................................................................................................................2- 14

2.2.5Connecting the Cable.................................................................................................................................2- 15

2.2.6Stirring Toner.............................................................................................................................................2- 15

2.2.7Setting the Cassettes ..................................................................................................................................2- 15

2.2.8APVC Correction of the Drum ..................................................................................................................2- 16

2.2.9Adjusting the Image Position.....................................................................................................................2- 17

2.2.10Attaching Other Parts ..............................................................................................................................2- 20

2.2.11If Not Connected to a Network................................................................................................................2- 21

2.3 Checking the Connection to the Network........................................................................................................2- 23

2.3.1Overview....................................................................................................................................................2- 23

2.3.2Using the PING Function ..........................................................................................................................2- 23

2.3.3Making a Check Using a Remote Host Address .......................................................................................2- 23

2.4 Troubleshooting the Network ..........................................................................................................................2- 25

2.4.1Overview....................................................................................................................................................2- 25

2.4.2Making a Check Using a Loopback Address ............................................................................................2- 25

2.4.3Making a Check Using a Local Host Address...........................................................................................2- 25

2.5 Checking the Images/Operations.....................................................................................................................2- 26

2.5.1Checking the Image Quality and Operation ..............................................................................................2- 26

2.6 Installing the Card Reader ...............................................................................................................................2- 27

2.6.1Points to Note ............................................................................................................................................2- 27

2.6.2Checking the Contents...............................................................................................................................2- 27

2.6.3Installation Procedure ................................................................................................................................2- 28

2.6.4Installation in a NetSpot Accountant (NSA) Environment .......................................................................2- 32

2.7 Installing the NE Controller.............................................................................................................................2- 33

2.7.1Installing the NE Controller-A1 ................................................................................................................2- 33

Chapter 3　Basic Operation

3.1 Construction.......................................................................................................................................................3- 1

3.1.1Functional Construction...............................................................................................................................3- 1

3.1.2Major PCB Wiring diagram.........................................................................................................................3- 2

3.2 Basic Sequence ..................................................................................................................................................3- 5

3.2.1Basic Sequence of Operation at Power-On .................................................................................................3- 5

Chapter 4　Main Controller

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

4.1 Construction ...................................................................................................................................................... 4- 1

4.1.1Construction and Mechanisms .................................................................................................................... 4- 1

4.2 Construction of the Electrical Circuitry ............................................................................................................ 4- 3

4.2.1Main Controller PCB................................................................................................................................... 4- 3

4.2.2HDD ............................................................................................................................................................ 4- 4

4.3 Start-Up Sequence............................................................................................................................................. 4- 7

4.3.1Overview ..................................................................................................................................................... 4- 7

4.3.2Start-Up Sequence....................................................................................................................................... 4- 7

4.4 Shut-Down Sequence ...................................................................................................................................... 4- 10

4.4.1Overview ................................................................................................................................................... 4- 10

4.4.2Flow of Operation ..................................................................................................................................... 4- 10

4.5 Image Processing............................................................................................................................................. 4- 11

4.5.1Overview of the Image Flow..................................................................................................................... 4- 11

4.5.2Construction of the Image Processing Module ......................................................................................... 4- 11

4.5.3Reader Unit Input Image Processing......................................................................................................... 4- 12

4.5.4Compressio/ Extesion/ Editing Block ...................................................................................................... 4- 13

4.5.5Printer unit Output Image Processing ....................................................................................................... 4- 14

4.6 Flow of Image Data......................................................................................................................................... 4- 15

4.6.1Flow of Image Data According to Copy Functions .................................................................................. 4- 15

4.6.2Flow of Image Data for the Box Function ................................................................................................ 4- 15

4.6.3Flow of Image Data for the SEND Function............................................................................................. 4- 16

4.6.4Flow of Image Data for the Fax Transmission.......................................................................................... 4- 17

4.6.5Flow of Image Data for the Fax Reception Function ................................................................................ 4- 17

4.6.6Flow of Image Data for the PDL Function................................................................................................ 4- 18

4.7 Parts Replacement Procedure.......................................................................................................................... 4- 20

4.7.1 Main Controller PCB ................................................................................................................................ 4- 20

4.7.1.1 Removing the Rear Cover ................................................................................................................. 4- 20

4.7.1.2 Removing the Main Controller PCB ................................................................................................. 4- 20

4.7.2 SDRAM .................................................................................................................................................... 4- 21

4.7.2.1 Removing the Face Cover ................................................................................................................. 4- 21

4.7.2.2 Removing the SDRAM ..................................................................................................................... 4- 21

4.7.3 Boot ROM................................................................................................................................................. 4- 22

4.7.3.1 Removing the Face Cover ................................................................................................................. 4- 22

4.7.3.2 Removing the Boot ROM.................................................................................................................. 4- 22

4.7.4 HDD.......................................................................................................................................................... 4- 22

4.7.4.1 Removing the Face Cover ................................................................................................................. 4- 22

4.7.4.2 Removing the Counter PCB .............................................................................................................. 4- 23

4.7.4.3 Removing the HDD........................................................................................................................... 4- 23

Chapter 5　Original Exposure System

5.1 Construction ...................................................................................................................................................... 5- 1

5.1.1Specifications, Control Mechanisms, and Functions .................................................................................. 5- 1

5.1.2Major Components ...................................................................................................................................... 5- 2

5.1.3Construction of the Control System ............................................................................................................ 5- 4

5.1.4Reader Controller PCB................................................................................................................................ 5- 5

5.2 Basic Sequence.................................................................................................................................................. 5- 7

5.2.1Basic Sequence of Operation at Power-On ................................................................................................. 5- 7

5.2.2Basic Sequence of Operation in Response to a Press on the Start Key (book mode; 1 original) ............... 5- 7

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

5.2.3Basic Sequence of Operation in Response to a Press on the Start Key (ADF mode; 1 original )...............5- 8

5.3 Various Control ...............................................................................................................................................5- 10

5.3.1 Controlling the Scanner Drive System......................................................................................................5- 10

5.3.1.1 Outline ...............................................................................................................................................5- 10

5.3.1.2 Controlling the Reader Motor............................................................................................................5- 10

5.3.2 Contact Image Sensor (CIS)......................................................................................................................5- 12

5.3.2.1 Outline ...............................................................................................................................................5- 12

5.3.2.2 Analog Control Inside the Contact Image Sensor .............................................................................5- 13

5.3.3 Enlargement/Reduction.............................................................................................................................5- 14

5.3.3.1 Changing the Magnification in Main Scanning Direction.................................................................5- 14

5.3.3.2 Varying the Magnification in Sub Scanning Direction .....................................................................5- 14

5.3.4 Detecting the Size of Originals .................................................................................................................5- 16

5.3.4.1 Outline ...............................................................................................................................................5- 16

5.3.4.2 Outline of Size Identification.............................................................................................................5- 17

5.3.5 Dirt Sensor Control ...................................................................................................................................5- 19

5.3.5.1 Outline ...............................................................................................................................................5- 19

5.3.6 Image Processing.......................................................................................................................................5- 22

5.3.6.1 Outline ...............................................................................................................................................5- 22

5.3.6.2 CCD Drive .........................................................................................................................................5- 23

5.3.6.3 Gain Correction and Offset Correction of the CCD Output ..............................................................5- 23

5.3.6.4 A/D Conversion of the CCD Output..................................................................................................5- 24

5.3.6.5 Shading Correction (outline) .............................................................................................................5- 24

5.3.6.6 Shading Adjustment...........................................................................................................................5- 24

5.3.6.7 Shading Correction ............................................................................................................................5- 24

5.4 Parts Replacement Procedure ..........................................................................................................................5- 26

5.4.1 Copyboard glass ........................................................................................................................................5- 26

5.4.1.1 Removing the Copyboard Glass ........................................................................................................5- 26

5.4.1.2 Removing the ADF Reading Glass....................................................................................................5- 26

5.4.2 Reader Controller PCB..............................................................................................................................5- 27

5.4.2.1 Before Replacing the Reader Controller PCB ...................................................................................5- 27

5.4.2.2 Removing the Reader Rear Cover .....................................................................................................5- 27

5.4.2.3 Removing the rear cover of the machine ...........................................................................................5- 27

5.4.2.4 Removing the flexible cable cover ....................................................................................................5- 28

5.4.2.5 Removing the Copyboard Glass ........................................................................................................5- 28

5.4.2.6 Removing the Reader Controller PCB...............................................................................................5- 29

5.4.2.7 After Replacing the Reader Controller PCB or After Initializing the RAM .....................................5- 31

5.4.3 Scanner Motor ...........................................................................................................................................5- 32

5.4.3.1 Removing the Reader Rear Cover .....................................................................................................5- 32

5.4.3.2 Removing the Scanner Motor ............................................................................................................5- 32

5.4.4 Contact sensor ...........................................................................................................................................5- 33

5.4.4.1 Removing the Reader Front Cover ....................................................................................................5- 33

5.4.4.2 Removing the Reader Rear Cover .....................................................................................................5- 33

5.4.4.3 Removing the Copyboard Glass ........................................................................................................5- 34

5.4.4.4 Removing the Contact Image Sensor (CIS).......................................................................................5- 35

5.4.4.5 After Replacement of the CIS............................................................................................................5- 36

5.4.5 Copyboard Cover Open/Close Sensor.......................................................................................................5- 36

5.4.5.1 Removing the Reader Rear Cover .....................................................................................................5- 36

5.4.5.2 Removing the Copyboard Cover Open/Closed Sensor (front/rear)...................................................5- 37

5.4.6 Contact Sensor HP Sensor.........................................................................................................................5- 37

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

5.4.6.1 Removing the Copyboard Glass........................................................................................................ 5- 37

5.4.6.2 Removing the ADF Reading Glass ................................................................................................... 5- 38

5.4.6.3 Removing the Contract Sensor Home Position Sensor ..................................................................... 5- 39

5.4.7 Original Size Sensor ................................................................................................................................. 5- 39

5.4.7.1 Removing the Reader Rear Cover..................................................................................................... 5- 39

5.4.7.2 Removing the Copyboard Glass........................................................................................................ 5- 40

5.4.7.3 Removing the Original Size Sensor .................................................................................................. 5- 41

5.4.8 Reader Heater (option).............................................................................................................................. 5- 42

5.4.8.1 Removing the Copyboard Glass........................................................................................................ 5- 42

5.4.8.2 Removing the Reader Heater (right) ................................................................................................. 5- 43

5.4.8.3 Removing the ADF Reading Glass ................................................................................................... 5- 43

5.4.8.4 Removing the Reader Heater (left).................................................................................................... 5- 44

Chapter 6　Laser Exposure

6.1 Construction ...................................................................................................................................................... 6- 1

6.1.1Specifications, Control Mechanism, and Functions.................................................................................... 6- 1

6.1.2Major Components ...................................................................................................................................... 6- 2

6.1.3Construction of the Control System ............................................................................................................ 6- 2

6.2 Basic Sequence.................................................................................................................................................. 6- 6

6.2.1Basic Sequence ........................................................................................................................................... 6- 6

6.3 Various Controls................................................................................................................................................ 6- 7

6.3.1 Controlling the Laser Activation Timing.................................................................................................... 6- 7

6.3.1.1 Turning On and off the Laser Light .................................................................................................... 6- 7

6.3.1.2 Main Scanning Synchronous Control.................................................................................................. 6- 8

6.3.2 Controlling the Intensity of Laser Light ..................................................................................................... 6- 9

6.3.2.1 APC Control ........................................................................................................................................ 6- 9

6.3.3 Controlling the Laser Scanner Motor ....................................................................................................... 6- 10

6.3.3.1 Controlling the Laser Scanner Motor................................................................................................ 6- 10

6.3.4 Controlling the Laser Shutter.................................................................................................................... 6- 10

6.3.4.1 Controlling the Laser Shutter ............................................................................................................ 6- 10

6.4 Parts Replacement Procedure.......................................................................................................................... 6- 12

6.4.1 Laser Scanner Unit.................................................................................................................................... 6- 12

6.4.1.1 Removing the Front Cover Unit........................................................................................................ 6- 12

6.4.1.2 Removing the Left Cover .................................................................................................................. 6- 12

6.4.1.3 Removing the Laser Unit................................................................................................................... 6- 12

Chapter 7　Image Formation

7.1 Construction ...................................................................................................................................................... 7- 1

7.1.1Specifications of the Image Formation System........................................................................................... 7- 1

7.1.2Major Components of the Image Formation System .................................................................................. 7- 2

7.2 Image Formation Process .................................................................................................................................. 7- 4

7.2.1Image Formation Process (outline) ............................................................................................................. 7- 4

7.2.2Image Formation Process (image formation).............................................................................................. 7- 5

7.3 Basic Sequence.................................................................................................................................................. 7- 6

7.3.1Sequence of Operation (initial rotation) ...................................................................................................... 7- 6

7.3.2Sequence of Operation (initial rotation) ...................................................................................................... 7- 6

7.3.3Sequence of Operation (copying)................................................................................................................ 7- 7

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

7.3.4Sequence of Operation (copying) ................................................................................................................7- 8

7.3.5Sequence of Operation (last rotation) ..........................................................................................................7- 8

7.3.6Sequence of Operation (last rotation) ..........................................................................................................7- 9

7.4 Image Stabilization Control.............................................................................................................................7- 10

7.4.1Overview....................................................................................................................................................7- 10

7.4.2APVC Control ...........................................................................................................................................7- 10

7.4.3ATVC Control ...........................................................................................................................................7- 11

7.5 Drum Unit........................................................................................................................................................7- 12

7.5.1 Charging Mechanism ................................................................................................................................7- 12

7.5.1.1 Controlling the Primary Charging Bias .............................................................................................7- 12

7.5.1.2 Primary Charging Roller Cleaning Mechanism.................................................................................7- 12

7.6 Drum Cleaner Unit ..........................................................................................................................................7- 14

7.6.1Photosensitive Drum Cleaning ..................................................................................................................7- 14

7.7 Developing Unit...............................................................................................................................................7- 15

7.7.1Controlling the Developing Bias ...............................................................................................................7- 15

7.8 Toner Container ...............................................................................................................................................7- 16

7.8.1Overview....................................................................................................................................................7- 16

7.8.2Route of Toner Supply...............................................................................................................................7- 17

7.8.3Controlling the Drive of the Toner Cartridge ............................................................................................7- 18

7.8.4Toner Supply Control ................................................................................................................................7- 19

7.8.5Recovery Sequence....................................................................................................................................7- 19

7.8.6Toner Level Detection ...............................................................................................................................7- 20

7.9 Transfer Unit....................................................................................................................................................7- 21

7.9.1 Outline of the Transfer Unit ......................................................................................................................7- 21

7.9.1.1 Outline ...............................................................................................................................................7- 21

7.9.2 Controlling the Transfer Bias....................................................................................................................7- 21

7.9.2.1 Transfer Roller Bias Control..............................................................................................................7- 21

7.9.3 Cleaning ....................................................................................................................................................7- 22

7.9.3.1 Transfer Roller Cleaning Mechanism................................................................................................7- 22

7.9.4 Separation Mechanism ..............................................................................................................................7- 22

7.9.4.1 Controlling the Static Eliminator Bias...............................................................................................7- 22

7.10 Transfer Mechanism ......................................................................................................................................7- 23

7.10.1 Transfer Guide Bias ................................................................................................................................7- 23

7.10.1.1 Transfer Guide Bias Control............................................................................................................7- 23

7.11 Photosensitive Drum Cleaning ......................................................................................................................7- 24

7.11.1Outline .....................................................................................................................................................7- 24

7.11.2Collection of Waste Toner.......................................................................................................................7- 24

7.11.3Checking the Waste Toner Box...............................................................................................................7- 24

7.12 Parts Replacement Procedure ........................................................................................................................7- 26

7.12.1 Pre-Exposure Lamp.................................................................................................................................7- 26

7.12.1.1 Removing the Front Cover Unit ......................................................................................................7- 26

7.12.1.2 Removing the Waste Toner Case.....................................................................................................7- 26

7.12.1.3 Removing the Toner Cartridge ........................................................................................................7- 26

7.12.1.4 Removing the Drum Unit ................................................................................................................7- 27

7.12.1.5 Removing the Developing Assembly ..............................................................................................7- 28

7.12.1.6 Removing the Upper Tray ...............................................................................................................7- 30

7.12.1.7 Removing the Toner Cartridge Cover .............................................................................................7- 30

7.12.1.8 Removing the Pre-Exposure Lamp..................................................................................................7- 30

7.12.2 Drum Unit ...............................................................................................................................................7- 31

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

7.12.2.1 Removing the Front Cover Unit...................................................................................................... 7- 31

7.12.2.2 Removing the Waste Toner Case .................................................................................................... 7- 31

7.12.2.3 Removing the Drum Unit ................................................................................................................ 7- 32

7.12.3 Hopper Assembly.................................................................................................................................... 7- 33

7.12.3.1 Removing the Front Cover Unit...................................................................................................... 7- 33

7.12.3.2 Removing the Waste Toner Case .................................................................................................... 7- 33

7.12.3.3 Removing the Toner Cartridge........................................................................................................ 7- 34

7.12.3.4 Removing the Drum Unit ................................................................................................................ 7- 34

7.12.3.5 Removing the Developing Assembly.............................................................................................. 7- 35

7.12.3.6 Removing the Upper Tray............................................................................................................... 7- 37

7.12.3.7 Removing the Toner Cartridge Cover ............................................................................................. 7- 37

7.12.3.8 Removing the Pre-Exposure Lamp ................................................................................................. 7- 37

7.12.3.9 Removing the Left Cover ................................................................................................................ 7- 38

7.12.3.10 Removing the Laser Unit............................................................................................................... 7- 38

7.12.3.11 Removing the Hopper Assembly................................................................................................... 7- 39

7.12.4 Sub Hopper ............................................................................................................................................. 7- 40

7.12.4.1 Removing the Front Cover Unit...................................................................................................... 7- 40

7.12.4.2 Removing the Waste Toner Case .................................................................................................... 7- 40

7.12.4.3 Removing the Toner Cartridge........................................................................................................ 7- 41

7.12.4.4 Removing the Drum Unit ................................................................................................................ 7- 42

7.12.4.5 Removing the Developing Assembly.............................................................................................. 7- 43

7.12.4.6 Removing the Upper Tray............................................................................................................... 7- 44

7.12.4.7 Removing the Toner Cartridge Cover ............................................................................................. 7- 44

7.12.4.8 Removing the Pre-Exposure Lamp ................................................................................................. 7- 45

7.12.4.9 Removing the Left Cover ................................................................................................................ 7- 45

7.12.4.10 Removing the Laser Unit............................................................................................................... 7- 45

7.12.4.11 Removing the Hopper Assembly................................................................................................... 7- 46

7.12.4.12 Removing the Toner Feedscrew Motor......................................................................................... 7- 47

7.12.4.13 Removing the Sub Hopper ............................................................................................................ 7- 48

7.12.5 Developing Assembly............................................................................................................................. 7- 49

7.12.5.1 Removing the Front Cover Unit...................................................................................................... 7- 49

7.12.5.2 Removing the Waste Toner Case .................................................................................................... 7- 50

7.12.5.3 Removing the Developing Assembly.............................................................................................. 7- 50

7.12.6 Developing Cylinder............................................................................................................................... 7- 52

7.12.6.1 Removing the Developing Cylinder................................................................................................ 7- 52

7.12.7 Transfer Charging Roller ........................................................................................................................ 7- 54

7.12.7.1 Removing the Transfer Roller......................................................................................................... 7- 54

7.12.8 Waste Toner Box .................................................................................................................................... 7- 55

7.12.8.1 Removing the Front Cover Unit...................................................................................................... 7- 55

7.12.8.2 Removing the Waste Toner Case .................................................................................................... 7- 55

7.12.9 Toner Level Sensor ................................................................................................................................. 7- 56

7.12.9.1 Removing the Front Cover Unit...................................................................................................... 7- 56

7.12.9.2 Removing the Waste Toner Case .................................................................................................... 7- 56

7.12.9.3 Removing the Toner Cartridge........................................................................................................ 7- 57

7.12.9.4 Removing the Drum Unit ................................................................................................................ 7- 57

7.12.9.5 Removing the Developing Assembly.............................................................................................. 7- 58

7.12.9.6 Removing the Upper Tray............................................................................................................... 7- 60

7.12.9.7 Removing the Toner Cartridge Cover ............................................................................................. 7- 60

7.12.9.8 Removing the Pre-Exposure Lamp ................................................................................................. 7- 60

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

7.12.9.9 Removing the Left Cover ................................................................................................................7- 61

7.12.9.10 Removing the Laser Unit...............................................................................................................7- 61

7.12.9.11 Removing the Hopper Assembly...................................................................................................7- 62

7.12.9.12 Removing the Toner Level Sensor ................................................................................................7- 63

7.12.10 Toner Feedscrew Motor .......................................................................................................................7- 63

7.12.10.1 Removing the Front Cover Unit ....................................................................................................7- 63

7.12.10.2 Removing the Waste Toner Case...................................................................................................7- 64

7.12.10.3 Removing the Toner Cartridge ......................................................................................................7- 64

7.12.10.4 Removing the Drum Unit ..............................................................................................................7- 65

7.12.10.5 Removing the Developing Assembly ............................................................................................7- 66

7.12.10.6 Removing the Upper Tray .............................................................................................................7- 67

7.12.10.7 Removing the Toner Cartridge Cover ...........................................................................................7- 68

7.12.10.8 Removing the Pre-Exposure Lamp................................................................................................7- 68

7.12.10.9 Removing the Left Cover ..............................................................................................................7- 68

7.12.10.10 Removing the Laser Unit.............................................................................................................7- 69

7.12.10.11 Removing the Hopper Assembly.................................................................................................7- 70

7.12.10.12 Removing the Toner Feedscrew Motor .......................................................................................7- 71

7.12.11 Static Charge Eliminator .......................................................................................................................7- 71

7.12.11.1 Removing the Static Eliminator.....................................................................................................7- 71

Chapter 8　Pickup/Feeding System

8.1 Construction.......................................................................................................................................................8- 1

8.1.1Specifications, Controls, and Functions ......................................................................................................8- 1

8.1.2Division into Blocks ....................................................................................................................................8- 2

8.1.3Division into Blocks ....................................................................................................................................8- 3

8.1.4Arrangement of Rollers ...............................................................................................................................8- 4

8.1.5Arrangement of Rollers ...............................................................................................................................8- 5

8.1.6Diagram of Paper Paths (printer on its own) ...............................................................................................8- 6

8.1.7Diagram of Paper Paths (w/ copy tray ).......................................................................................................8- 7

8.1.8Diagram of Paper Paths (w/ 3 Way Unit-A1 /copy tray).............................................................................8- 8

8.1.9Diagram of Paper Paths (w/ Finisher-S1/copy tray)....................................................................................8- 9

8.1.10Diagram of Paper Paths (w/ Finisher-Q3/Saddle Finisher-Q4)...............................................................8- 10

8.1.11Arrangement of Sensors ..........................................................................................................................8- 11

8.1.12Arrangement of Sensors ..........................................................................................................................8- 12

8.1.13Route of Drive .........................................................................................................................................8- 14

8.1.14Route of Drive .........................................................................................................................................8- 14

8.2 Basic Sequence ................................................................................................................................................8- 17

8.2.1Basic Sequence .........................................................................................................................................8- 17

8.2.2Increase in Speed .......................................................................................................................................8- 17

8.2.3Increase in Speed .......................................................................................................................................8- 20

8.3 Detecting Jams.................................................................................................................................................8- 23

8.3.1 Delivery Jams............................................................................................................................................8- 23

8.3.1.1 Delay Jam Outside the Cassette Pickup Assembly............................................................................8- 23

8.3.1.2 Delay Jam in the Cassette Pickup Assembly .....................................................................................8- 23

8.3.2 Stationary Jams .........................................................................................................................................8- 24

8.3.2.1 Common Stationary Jam....................................................................................................................8- 24

8.3.2.2 Stationary Jam at Power-On ..............................................................................................................8- 25

8.3.3 Other Jams.................................................................................................................................................8- 25

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

8.3.3.1 Door Open Jam.................................................................................................................................. 8- 25

8.4 Cassette Pick-Up Unit ..................................................................................................................................... 8- 26

8.4.1Overview ................................................................................................................................................... 8- 26

8.4.2Basic Sequence ......................................................................................................................................... 8- 27

8.4.3Identifying the Paper Size ......................................................................................................................... 8- 27

8.4.4Setting Up the Universal Cassette ............................................................................................................. 8- 29

8.4.5Paper Level Sensor.................................................................................................................................... 8- 30

8.5 Manual Feed Pickup Unit................................................................................................................................ 8- 34

8.5.1Overview ................................................................................................................................................... 8- 34

8.5.2Basic Sequence of Operation .................................................................................................................... 8- 35

8.5.3Identifying the Paper Size ......................................................................................................................... 8- 35

8.5.4Paper Retaining Mechanism...................................................................................................................... 8- 36

8.6 Registration Unit ............................................................................................................................................. 8- 38

8.6.1Overview ................................................................................................................................................... 8- 38

8.6.2Checking Horizontal Registration ............................................................................................................. 8- 38

8.7 Duplex Feeding Unit ....................................................................................................................................... 8- 40

8.7.1Overview ................................................................................................................................................... 8- 40

8.7.2Overview ................................................................................................................................................... 8- 41

8.7.3Sequence of Image Formation................................................................................................................... 8- 42

8.7.4Sequence of Image Formation................................................................................................................... 8- 44

8.7.5Flow of Paper (w/o/ delivery option) ........................................................................................................ 8- 45

8.7.6Flow of Paper (w/ delivery option) ........................................................................................................... 8- 51

8.7.7Flow of Paper ........................................................................................................................................... 8- 57

8.8 Parts Replacement Procedure.......................................................................................................................... 8- 64

8.8.1 Pick-up Unit 1 ........................................................................................................................................... 8- 64

8.8.1.1 Removing the Right Cover (rear)...................................................................................................... 8- 64

8.8.1.2 Removing the Right Door ................................................................................................................. 8- 64

8.8.1.3 Removing the Right Door ................................................................................................................. 8- 65

8.8.1.4 Removing the Right Cover (lower front) .......................................................................................... 8- 66

8.8.1.5 Removing the Pickup Assembly 1 .................................................................................................... 8- 66

8.8.2 Pick-up Unit 2 ........................................................................................................................................... 8- 67

8.8.2.1 Removing the Right Cover (rear)...................................................................................................... 8- 67

8.8.2.2 Removing the Right Cover (lower front) .......................................................................................... 8- 67

8.8.2.3 Removing the Pickup Assembly 2 .................................................................................................... 8- 67

8.8.3 Pickup Roller ............................................................................................................................................ 8- 68

8.8.3.1 Removing the Pickup Roller/Feed Roller/Separation Roller ............................................................ 8- 68

8.8.4 Sensor Mount ............................................................................................................................................ 8- 68

8.8.4.1 Removing the Right Cover (rear)...................................................................................................... 8- 68

8.8.4.2 Removing the Right Door ................................................................................................................. 8- 68

8.8.4.3 Removing the Right Door ................................................................................................................. 8- 70

8.8.4.4 Removing the Right Cover (lower front) .......................................................................................... 8- 70

8.8.4.5 Removing the Pickup Assembly 1 .................................................................................................... 8- 71

8.8.4.6 Removing the Pickup Assembly 2 .................................................................................................... 8- 71

8.8.4.7 Removing the Sensor Mounting Plate............................................................................................... 8- 71

8.8.4.8 Mounting the Sensor Mounting Plate................................................................................................ 8- 72

8.8.5 Cassette Pick-up Motor 1.......................................................................................................................... 8- 73

8.8.5.1 Removing the Rear Cover ................................................................................................................. 8- 73

8.8.5.2 Removing the Right Cover (rear)...................................................................................................... 8- 73

8.8.5.3 Removing the Pickup Motor Base..................................................................................................... 8- 74

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

8.8.5.4 Removing the Cassette Pickup Motor 1 ............................................................................................8- 74

8.8.6 Cassette Pick-up Motor 2 ..........................................................................................................................8- 74

8.8.6.1 Removing the Rear Cover..................................................................................................................8- 74

8.8.6.2 Removing the Right Cover (rear) ......................................................................................................8- 75

8.8.6.3 Removing the Pickup Motor Base.....................................................................................................8- 75

8.8.6.4 Removing the Cassette Pickup Motor 2 ............................................................................................8- 76

8.8.7 Cassette Size Sensor..................................................................................................................................8- 76

8.8.7.1 Removing the Right Cover (rear) ......................................................................................................8- 76

8.8.7.2 Removing the Right Door..................................................................................................................8- 77

8.8.7.3 Removing the Right Door..................................................................................................................8- 78

8.8.7.4 Removing the Right Cover (lower front)...........................................................................................8- 78

8.8.7.5 Removing the Pickup Assembly 2.....................................................................................................8- 79

8.8.7.6 Removing the Pickup Assembly 1.....................................................................................................8- 79

8.8.7.7 Removing the Cassette Size Sensor...................................................................................................8- 79

8.8.8 Cassette Retry Paper Sensor......................................................................................................................8- 80

8.8.8.1 Removing the Right Cover (rear) ......................................................................................................8- 80

8.8.8.2 Removing the Right Door..................................................................................................................8- 81

8.8.8.3 Removing the Right Door..................................................................................................................8- 82

8.8.8.4 Removing the Right Cover (lower front)...........................................................................................8- 83

8.8.8.5 Removing the Pickup Assembly 1.....................................................................................................8- 83

8.8.8.6 Removing the Pickup Assembly 2.....................................................................................................8- 84

8.8.8.7 Removing the Sensor Mounting Plate ...............................................................................................8- 84

8.8.8.8 Removing the Cassette Retry Paper Sensor.......................................................................................8- 85

8.8.9 Cassette Paper Sensor................................................................................................................................8- 85

8.8.9.1 Removing the Right Cover (rear) ......................................................................................................8- 85

8.8.9.2 Removing the Right Door..................................................................................................................8- 85

8.8.9.3 Removing the Right Door..................................................................................................................8- 86

8.8.9.4 Removing the Right Cover (lower front)...........................................................................................8- 87

8.8.9.5 Removing the Pickup Assembly 1.....................................................................................................8- 88

8.8.9.6 Removing the Pickup Assembly 2.....................................................................................................8- 88

8.8.9.7 Removing the Sensor Mounting Plate ...............................................................................................8- 88

8.8.9.8 Removing the Cassette Paper Sensor.................................................................................................8- 89

8.8.10 Cassette Paper Level Sensor (A/B) .........................................................................................................8- 89

8.8.10.1 Removing the Right Cover (rear) ....................................................................................................8- 89

8.8.10.2 Removing the Right Door................................................................................................................8- 90

8.8.10.3 Removing the Right Door................................................................................................................8- 91

8.8.10.4 Removing the Right Cover (lower front).........................................................................................8- 92

8.8.10.5 Removing the Pickup Assembly 1...................................................................................................8- 92

8.8.10.6 Removing the Pickup Assembly 2...................................................................................................8- 93

8.8.10.7 Removing the Sensor Mounting Plate .............................................................................................8- 93

8.8.10.8 Removing the Cassette Paper Level Sensor (A/B) ..........................................................................8- 94

8.8.11 Slide Resistor...........................................................................................................................................8- 94

8.8.11.1 Removing the Right Cover (rear) ....................................................................................................8- 94

8.8.11.2 Removing the Right Door................................................................................................................8- 94

8.8.11.3 Removing the Right Door................................................................................................................8- 95

8.8.11.4 Removing the Manual Feed Unit.....................................................................................................8- 96

8.8.11.5 Removing the Manual Tray Unit.....................................................................................................8- 97

8.8.11.6 Removing the Slide Resistor............................................................................................................8- 98

8.8.12 Cassette Pickup Solenoid ........................................................................................................................8- 98

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

8.8.12.1 Removing the Right Cover (rear).................................................................................................... 8- 98

8.8.12.2 Removing the Right Door ............................................................................................................... 8- 98

8.8.12.3 Removing the Right Door ............................................................................................................... 8- 99

8.8.12.4 Removing the Right Cover (lower front) ...................................................................................... 8- 100

8.8.12.5 Removing the Pickup Assembly 1 ................................................................................................ 8- 101

8.8.12.6 Removing the Pickup Assembly 2 ................................................................................................ 8- 101

8.8.12.7 Removing the Cassette Pickup Solenoid....................................................................................... 8- 101

8.8.13 Cassette Size Sensor Relay PCB........................................................................................................... 8- 102

8.8.13.1 Removing the Right Cover (rear).................................................................................................. 8- 102

8.8.13.2 Removing the Right Door ............................................................................................................. 8- 102

8.8.13.3 Removing the Right Door ............................................................................................................. 8- 103

8.8.13.4 Removing the Right Cover (lower front) ...................................................................................... 8- 104

8.8.13.5 Removing the Pickup Assembly 1 ................................................................................................ 8- 104

8.8.13.6 Removing the Pickup Assembly 2 ................................................................................................ 8- 105

8.8.13.7 Removing the Cassette Size Sensor Relay PCB............................................................................ 8- 105

8.8.14 Manual Tray Assembly......................................................................................................................... 8- 105

8.8.14.1 Removing the Right Cover (rear).................................................................................................. 8- 105

8.8.14.2 Removing the Right Door ............................................................................................................. 8- 106

8.8.14.3 Removing the Right Door ............................................................................................................. 8- 107

8.8.14.4 Removing the Manual Feed Unit .................................................................................................. 8- 108

8.8.14.5 Removing the Manual Feed Tray Assembly ................................................................................. 8- 109

8.8.15 Manual Feed Unit ................................................................................................................................. 8- 109

8.8.15.1 Removing the Right Cover (rear).................................................................................................. 8- 109

8.8.15.2 Removing the Right Door ............................................................................................................. 8- 109

8.8.15.3 Removing the Right Door ............................................................................................................. 8- 111

8.8.15.4 Removing the Manual Feed Unit .................................................................................................. 8- 111

8.8.16 Manual Pickup Roller ........................................................................................................................... 8- 112

8.8.16.1 Removing the Right Cover (rear).................................................................................................. 8- 112

8.8.16.2 Removing the Right Door ............................................................................................................. 8- 113

8.8.16.3 Removing the Right Door ............................................................................................................. 8- 114

8.8.16.4 Removing the Manual Feed Unit .................................................................................................. 8- 115

8.8.16.5 Removing the Manual Feed Pickup Roller ................................................................................... 8- 116

8.8.17 Manual Pick-up Clutch ......................................................................................................................... 8- 116

8.8.17.1 Removing the Right Cover (rear).................................................................................................. 8- 116

8.8.17.2 Removing the Right Door ............................................................................................................. 8- 116

8.8.17.3 Removing the Right Door ............................................................................................................. 8- 118

8.8.17.4 Removing the Rear Cover ............................................................................................................. 8- 118

8.8.17.5 Removing the Main Power Switch................................................................................................ 8- 119

8.8.17.6 Removing the Manual Feed Pickup Clutch................................................................................... 8- 119

8.8.18 Manual Separation Pad ......................................................................................................................... 8- 120

8.8.18.1 Removing the Right Cover (rear).................................................................................................. 8- 120

8.8.18.2 Removing the Right Door ............................................................................................................. 8- 120

8.8.18.3 Removing the Right Door ............................................................................................................. 8- 121

8.8.18.4 Removing the Manual Feed Unit .................................................................................................. 8- 122

8.8.18.5 Removing the Manual Feed Pickup Roller ................................................................................... 8- 123

8.8.18.6 Removing the Manual Feed Separation pad.................................................................................. 8- 124

8.8.19 Registration Clutch ............................................................................................................................... 8- 124

8.8.19.1 Removing the Rear Cover ............................................................................................................. 8- 124

8.8.19.2 Removing the Main Drive Assembly............................................................................................ 8- 124

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

8.8.19.3 Removing the Main Drive Assembly ............................................................................................8- 125

8.8.19.4 Removing the Registration Clutch.................................................................................................8- 126

8.8.20 Feeding Roller .......................................................................................................................................8- 126

8.8.20.1 Removing the Pickup Roller/Feed Roller/Separation Roller.........................................................8- 126

8.8.21 Vertical Path Roller...............................................................................................................................8- 126

8.8.21.1 Removing the Right Cover (rear) ..................................................................................................8- 126

8.8.21.2 Removing the Right Door..............................................................................................................8- 127

8.8.21.3 Removing the Right Door..............................................................................................................8- 128

8.8.21.4 Removing the Right Cover (lower front).......................................................................................8- 129

8.8.21.5 Removing the Pickup Assembly 1.................................................................................................8- 129

8.8.21.6 Removing the Pickup Assembly 2.................................................................................................8- 130

8.8.21.7 Removing the Sensor Mounting Plate ...........................................................................................8- 130

8.8.21.8 Removing the Vertical Path Roller................................................................................................8- 131

8.8.22 Duplex Feed Roller 2 ............................................................................................................................8- 131

8.8.22.1 Removing the Right Cover (rear) ..................................................................................................8- 131

8.8.22.2 Removing the Right Door..............................................................................................................8- 131

8.8.22.3 Removing the Right Door..............................................................................................................8- 132

8.8.22.4 Removing the Duplex Feed Roller 2 .............................................................................................8- 133

8.8.23 Duplex Feed Sensor ..............................................................................................................................8- 134

8.8.23.1 Removing the Right Cover (rear) ..................................................................................................8- 134

8.8.23.2 Removing the Right Door..............................................................................................................8- 134

8.8.23.3 Removing the Right Door..............................................................................................................8- 135

8.8.23.4 Removing the Duplex Feed Sensor ...............................................................................................8- 136

8.8.24 Duplex Feed Clutch...............................................................................................................................8- 137

8.8.24.1 Removing the Rear Cover..............................................................................................................8- 137

8.8.24.2 Removing the Duplex Feed Clutch................................................................................................8- 137

8.8.25 Delivery Assembly 1.............................................................................................................................8- 138

8.8.25.1 Removing the Right Cover (rear) ..................................................................................................8- 138

8.8.25.2 Removing the Front Cover Unit ....................................................................................................8- 138

8.8.25.3 Removing the Delivery Tray .........................................................................................................8- 138

8.8.25.4 Removing the Right Door..............................................................................................................8- 139

8.8.25.5 Removing the Right Door..............................................................................................................8- 140

8.8.25.6 Removing the Extension Delivery Kit...........................................................................................8- 140

8.8.25.7 Removing the Delivery Assembly 1..............................................................................................8- 141

8.8.26 Fixing/ Delivery Drive Assembly .........................................................................................................8- 142

8.8.26.1 Removing the Right Cover (rear) ..................................................................................................8- 142

8.8.26.2 Removing the Front Cover Unit ....................................................................................................8- 142

8.8.26.3 Removing the Delivery Tray .........................................................................................................8- 142

8.8.26.4 Removing the Right Door..............................................................................................................8- 143

8.8.26.5 Removing the Right Door..............................................................................................................8- 144

8.8.26.6 Removing the Delivery Assembly 1..............................................................................................8- 144

8.8.26.7 Removing the Fixing Unit .............................................................................................................8- 145

8.8.26.8 Removing the Fixing/Delivery Drive Assembly ...........................................................................8- 146

8.8.27 Separation Roller...................................................................................................................................8- 147

8.8.27.1 Removing the Pickup Roller/Feed Roller/Separation Roller.........................................................8- 147

Chapter 9　Fixing System

9.1 Construction.......................................................................................................................................................9- 1

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

9.1.1Specifications, Control Mechanisms, and Functions .................................................................................. 9- 1

9.1.2Major Components ...................................................................................................................................... 9- 1

9.2 Basic Sequence.................................................................................................................................................. 9- 3

9.2.1Power-On Sequence .................................................................................................................................... 9- 3

9.2.2Down Sequence........................................................................................................................................... 9- 3

9.3 Various Control Mechanisms............................................................................................................................ 9- 4

9.3.1 Controlling the Speed of the Fixing Film .................................................................................................. 9- 4

9.3.1.1 Controlling the Fixing Film Speed in Response to Low Temperature................................................ 9- 4

9.3.1.2 Controlling the Fixing Film Speed ...................................................................................................... 9- 4

9.3.2 Controlling the Fixing Film Temperature................................................................................................... 9- 5

9.3.2.1 Controlling the Power Supply in Response to Low Temperature....................................................... 9- 5

9.3.2.2 Controlling the Feeding in Response to Low Temperature................................................................. 9- 5

9.3.2.3 Controlling the Power Supply at Start-Up........................................................................................... 9- 5

9.3.2.4 Copying Temperature Control............................................................................................................. 9- 6

9.3.2.5 Changing the Fixing Film Control Temperature ................................................................................. 9- 6

9.3.2.6 Temperature Control in Response to Automatic Double-Sided Copy ................................................ 9- 6

9.3.2.7 Temperature Control in Response to Change of Paper Size ............................................................... 9- 7

9.3.3 Cleaning ...................................................................................................................................................... 9- 7

9.3.3.1 Fixing Film Cleaning........................................................................................................................... 9- 7

9.3.4 Detecting the Passage of Paper................................................................................................................... 9- 8

9.3.4.1 Detecting the Passage of Paper............................................................................................................ 9- 8

9.4 Protective Functions .......................................................................................................................................... 9- 9

9.4.1Protective Functions .................................................................................................................................... 9- 9

9.4.2Detecting an Error ..................................................................................................................................... 9- 10

9.5 Parts Replacement Procedure.......................................................................................................................... 9- 12

9.5.1 Fixing Unit ................................................................................................................................................ 9- 12

9.5.1.1 Removing the Right Cover (rear)...................................................................................................... 9- 12

9.5.1.2 Removing the Right Door ................................................................................................................. 9- 12

9.5.1.3 Removing the Right Door ................................................................................................................. 9- 13

9.5.1.4 Removing the Fixing Unit ................................................................................................................. 9- 14

9.5.2 Pressure Roller .......................................................................................................................................... 9- 15

9.5.2.1 Removing the Inside Delivery Cover Unit........................................................................................ 9- 15

9.5.2.2 Removing the Grounding Plate ......................................................................................................... 9- 16

9.5.2.3 Removing the Fixing Film Cover...................................................................................................... 9- 16

9.5.2.4 Removing the Left Side Plate............................................................................................................ 9- 17

9.5.2.5 Releasing the Locking Plate .............................................................................................................. 9- 18

9.5.2.6 Removing the Fixing Film Unit ........................................................................................................ 9- 18

9.5.2.7 Removing the Inlet Guide ................................................................................................................. 9- 19

9.5.2.8 Removing the Pressure Roller........................................................................................................... 9- 20

9.5.3 Cleaning Roller ......................................................................................................................................... 9- 21

9.5.3.1 Removing the Inside Delivery Cover Unit........................................................................................ 9- 21

9.5.3.2 Removing the Cleaning Roller .......................................................................................................... 9- 21

9.5.4 Fixing Film................................................................................................................................................ 9- 22

9.5.4.1 Removing the Inside Delivery Cover Unit........................................................................................ 9- 22

9.5.4.2 Removing the Grounding Plate ......................................................................................................... 9- 22

9.5.4.3 Removing the Fixing Film Cover...................................................................................................... 9- 22

9.5.4.4 Removing the Left Side Plate............................................................................................................ 9- 23

9.5.4.5 Releasing the Locking Plate .............................................................................................................. 9- 24

9.5.4.6 Removing the Fixing Film Unit ........................................................................................................ 9- 25

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Contents

9.5.5 Internal Delivery Sensor............................................................................................................................9- 26

9.5.5.1 Removing the Inside Delivery Cover Unit ........................................................................................9- 26

9.5.5.2 Removing the Grounding Plate..........................................................................................................9- 26

9.5.5.3 Removing the Fixing Film Cover ......................................................................................................9- 27

9.5.5.4 Removing the Left Side Plate ............................................................................................................9- 27

9.5.5.5 Releasing the Locking Plate ..............................................................................................................9- 28

9.5.5.6 Removing the Fixing Film Unit.........................................................................................................9- 29

9.5.5.7 Removing the Inside Delivery Sensor ...............................................................................................9- 30

9.5.6 Fixing Film Sensor ....................................................................................................................................9- 31

9.5.6.1 Removing the Inside Delivery Cover Unit ........................................................................................9- 31

9.5.6.2 Removing the Grounding Plate..........................................................................................................9- 31

9.5.6.3 Removing the Fixing Film Sensor .....................................................................................................9- 31

Chapter 10　External and Controls

10.1 Control Panel .................................................................................................................................................10- 1

10.1.1Overview..................................................................................................................................................10- 1

10.1.2LCD Indication Processing......................................................................................................................10- 1

10.1.3Adjustment of the LCD Contact ..............................................................................................................10- 2

10.1.4Functions of the Control Panel CPU .......................................................................................................10- 2

10.2 Counters.........................................................................................................................................................10- 3

10.2.1Overview..................................................................................................................................................10- 3

10.2.2Timing of Increasing the Count...............................................................................................................10- 4

10.3 Fans................................................................................................................................................................10- 6

10.3.1Overview..................................................................................................................................................10- 6

10.3.22-Speed Control .......................................................................................................................................10- 6

10.3.3Sequence of Operation.............................................................................................................................10- 7

10.4 Power Supply System ....................................................................................................................................10- 8

10.4.1 Power Supply ..........................................................................................................................................10- 8

10.4.1.1 Route of Power Inside the Printer Unit ..........................................................................................10- 8

10.4.1.2 Power Supply Route in the Reader Unit..........................................................................................10- 9

10.4.1.3 Timing of Supply to the Reader Unit.............................................................................................10- 10

10.4.1.4 Connections to Various Accessories..............................................................................................10- 10

10.4.2 Rated Output of the DC Power Supply PCB.........................................................................................10- 11

10.4.2.1 Rated Output of the Printer Unit Power Supply PCB....................................................................10- 11

10.4.2.2 Rated Output of the Controller Power Supply PCB ......................................................................10- 12

10.4.2.3 Rated Output of the Accessories Power Supply PCB....................................................................10- 12

10.4.2.4 Rated Output of the All-Night Power Supply PCB .......................................................................10- 13

10.4.3 Protection Function ...............................................................................................................................10- 13

10.4.3.1 Protective Mechanisms..................................................................................................................10- 13

10.4.4 Backup Battery......................................................................................................................................10- 13

10.4.4.1 Backup Battery ..............................................................................................................................10- 13

10.4.5 Energy-Saving Function........................................................................................................................10- 14

10.4.5.1 Overview........................................................................................................................................10- 14

10.4.5.2 Machine as Supplied with Power...................................................................................................10- 15

10.5 Parts Replacement Procedure ......................................................................................................................10- 17

10.5.1 Main Drive Assembly ...........................................................................................................................10- 17

10.5.1.1 Removing the Rear Cover..............................................................................................................10- 17

10.5.1.2 Removing the Main Drive Assembly ............................................................................................10- 17

Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Other manuals for iR4570 Series

This manual suits for next models

Table of contents

Other Canon All In One Printer manuals

Canon

Canon MP980 series User manual

Canon

Canon Color imageCLASS MF8580Cdw Assembly instructions

Canon

Canon imageRUNNER 1025 User manual

Canon

Canon Pixma MG2500 Series Setup guide

Canon

Canon imageclass MF216N User manual

Canon

Canon imageCLASS D480 Assembly instructions

Canon

Canon MultiPASS F20 User guide

Canon

Canon imageRUNNER ADVANCE DX 529iF User manual

Canon

Canon 5119B001AA Assembly instructions

Canon

Canon MultiPASS C755 User manual

Canon

Canon PIXMA MG3170 User manual

Canon

Canon MF55DD Series User guide

Canon

Canon MG7700 series User manual

Canon

Canon ImageCLASS MF4270 Safety guide

Canon

Canon imageRUNNER 1750iF Safety guide

Canon

Canon imagePRESS C850 User manual

Canon

Canon MX390 series Setup guide

Canon

Canon PIXMA MP990 Installation and maintenance instructions

Canon

Canon LBP352 User manual

Canon

Canon imageCLASS MF7460 User manual

Canon

Canon iR4570 Series User manual

Canon

Canon PIXMA MP830 User manual

Canon

Canon imageRUNNER 1643iF II User manual

Canon

Canon Color imageCLASS MF8050Cn Safety guide

Popular All In One Printer manuals by other brands

Xerox

Xerox DocuColor 2240 Service manual

Ricoh

Ricoh MP 7503SP Field service manual

Lexmark

Lexmark C925 user guide

Ricoh

Ricoh Aficio 2045e Scanner Reference

Epson

Epson NX100 - Stylus All-In-One User guide addendum

Lexmark

Lexmark Z82 user guide

Lexmark

Lexmark X646e MFP Specifications

Lexmark

Lexmark 16M1794 - X S654de MFP B/W Laser Maintenance Guide

Xerox

Xerox WorkCentrePro 123 System administration System administration guide

Brother

Brother MFC 5890CN - Color Inkjet - All-in-One Service manual

Kyocera

Kyocera TASKalfa 2551ci Driver guide

Ricoh

Ricoh A283 Supplemental service manual

Konica Minolta

Konica Minolta bizhub C200 user guide

DATAPROCESS

DATAPROCESS ST 230 user manual

Xerox

Xerox Phaser 6128 MFP user guide

Konica Minolta

Konica Minolta bizhub 501 Short guide

Epson

Epson CX7000F - Stylus Color Inkjet Basic guide

Xerox

Xerox Phaser 6115 MFP user guide