Canon PIXMA MG7120 Instruction Manual

Installing Your Multifunction
to Your Network for the First Time
PIXMA MG7120
Windows OS
1

Installing Your Multifunction
to Your Network for the First Time
PIXMA MG7120
Windows OS
Preparing to Connect My Multifunction to My Network 3
Network Requirements 3
Notes on Wireless Connection 4
Installing the Drivers & Software 5
2

Preparing to Connect the Multifunction
To the Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
3

Preparing to Connect the Multifunction
To the Network
4
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
•In an office setup, consult your network administrator
•If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
•Place the machine and computer on the same network segment.
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.

Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
Installation time varies depending on the computer environment or the number of application software to be installed.
Installing the Drivers & Software
5
IMPORTANT
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•Do not switch users during the installation process.
•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the
Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.

Installing the Drivers & Software
6
To set up the PIXMA MG7120 to your wireless network, you must first install the software to your computer.
To begin the setup procedure, insert the Setup CD-ROM into your computer.*
The setup program will start automatically. The setup instructions presented in this document describe the “Cableless Setup” method
which does not require the need to know the SSID (network name), or network passphrase and does not require the printer to be temporarily
connected to the computer with a USB cable.
The Cableless Setup is not supported in Windows XP. For Windows XP Users: Use the “ Standard Setup” method . You will need to know
your SSID (network name / access point name) and Network Key (password) to successfully use this method to set up your printer with the
wireless network.
*If you don’t have or cannot use the Setup CD-ROM, follow the steps below to start the setup.
•Download the software (click the link to download)
•Double-click the downloaded .exe file (Win-MG7100-1_0-ucd.exe)
If the User Account Control dialog box appears during the setup, click Yes or Continue.

Installing the Drivers & Software
77
Click Next on the initial screen

Installing the Drivers & Software
88
On the Connection Method Selection screen (1-1) select Network Connection, then select Wireless Connection on screen (1-2).

Installing the Drivers & Software
99
Continue to follow on-screen instructions. Select Connect to the network on the Printer Setup (2-1) screen.

Installing the Drivers & Software
1010
Continue to follow on-screen instructions. If the HOME button is lit, touch the HOME button and click Next. Then, flick the screen left or
right and tap the WLAN icon. Then tap Wireless LAN setup. Click Next.

Installing the Drivers & Software
1111
If your printer’s display is the same as
example A, tap To other connection
methods. The display will then
change to the display example B.
When the display changes to B
or was B to begin with, tap
Other setup

Installing the Drivers & Software
1212
Click Other Methods on the Setup Procedure Selection screen (3-1).

Installing the Drivers & Software
1313
On the Setup Procedure Selection screens (3-1) and (3-2), click Other setup on step (3-2) then Cableless setup on (3-3) .

Installing the Drivers & Software
1414
On the printer’s touch-screen, tap Other setup then tap Cableless setup. Click Next on the on-screen instructions after each selection.

Installing the Drivers & Software
1515
Tap OK on your printer’s touch-screen. Click Next on the Connection via Cableless setup screen (4-3)

Installing the Drivers & Software
1616
Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next.
*MP Drivers is required and cannot be deselected. We recommend installing My Image Garden and Quick Menu to take full
advantage of the printer’s features.

Installing the Drivers & Software
1717
Continue following on-screen instructions.
When the Setup Completion dialog box appears, click Complete.
At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit
the setup program.