Canon FaxPhone L90 Safety guide

Starter Guide
Please read this guide before operating this product.
After you nish reading this guide, store it in a safe place for future
reference.

Unpacking the Machine
1
2
3
4
5
6
7
Always hold the bottom when you lift
the machine and lift it carefully, as
shown in the illustration below.
Remove all shipping tape and packing material from the machine.

Contents
What You Can Do with the Machine������������������������������������������������������������������������������������������������������������������������� 2
Find Your Purpose on the Machine �������������������������������������������������������������������������������������������������������������������������� 3
Set Up the Machine����������������������������������������������������������������������������������������������������������������������������������������������������� 4
Do You Have Everything?......................................................................................................................................................4
Manuals for the Machine...........................................................................................................................................4
Install Toner Cartridge............................................................................................................................................................5
Load Paper..................................................................................................................................................................................7
Connect the Power Cord .......................................................................................................................................................9
Set the Date and Time.........................................................................................................................................................10
Before FAX Setting ���������������������������������������������������������������������������������������������������������������������������������������������������� 11
Connect Telephone Cables................................................................................................................................................11
Install Handset .......................................................................................................................................................................12
If Necessary to Use Pulse Dialing ........................................................................................................................13
Set the Machine for Sending Faxes������������������������������������������������������������������������������������������������������������������������ 14
Entering Information................................................................................................................................................14
Registering Sender Information......................................................................................................................................15
Guidelines for Entering Information...................................................................................................................15
Set the Machine for Receiving Faxes ��������������������������������������������������������������������������������������������������������������������� 16
Select the Receive Mode that Suits Your Needs ........................................................................................................16
Set the Receive Mode..........................................................................................................................................................16
About the Receiving Modes ..................................................................................................................................17
Software Settings with Computer�������������������������������������������������������������������������������������������������������������������������� 18
Connection Between Computer and the Machine...................................................................................................18
USB Connection.........................................................................................................................................................18
About User Software CD ....................................................................................................................................................18
Driver .............................................................................................................................................................................18
Manual...........................................................................................................................................................................18
USB Connection.....................................................................................................................................................................19
Installation Procedure..............................................................................................................................................19
Checking the Installation........................................................................................................................................21
Appendix��������������������������������������������������������������������������������������������������������������������������������������������������������������������� 22
Uninstallation Procedure ...................................................................................................................................................22
Uninstalling the UFRII LT Driver............................................................................................................................22
Using Online Help.................................................................................................................................................................23

2
What You Can Do with the Machine
You can use the following functions with FAXPHONE L90.

3
For using each function (FAX, COPY, PRINTER), follow the settings in the owchart below.
For example, when you use copy function only, follow“Necessary Settings”. When you use both copy and fax
functions, follow“Necessary Settings”and “Fax Settings”.
Find Your Purpose on the Machine

4
Set Up the Machine
Do You Have Everything?
Machine●Toner Cartridge●Power Cord●
Telephone Cable●Destination Labels●Document Feeder Tray●
Handset●Handset Cradle●Plugs with Pins●
Starter Guide (This Document)
Basic Operation Guide
User Software CD
Limited Warranty Notice
Registration Card
●
●
●
●
●
Manuals for the Machine
Starter Guide (This Document): Machine set-up and software installation●
Basic Operation Guide: Basic operation features●
Reference Guide: Total operation features●
(User software CD)

5
Install Toner Cartridge
1 Remove the toner cartridge from the bag.
Do not open the drum protective shutter (A).
2 Gently rock the toner cartridge several times to
evenly distribute the toner inside.
3 Place the toner cartridge on a at surface and
pull the seal completely out.
Do not pull the seal out at an angle.
If toner is adhered on the removed seal, be careful that
your hands or clothes do not get dirty from touching the
toner.
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. If you do, the toner may be set permanently.
–
–
Set Up the Machine

6
4 Open the toner cover by the notch (A).
5 Hold the toner cartridge by its handle (A).
6 The arrow (A) on the toner cartridge should be
facing away from you and pointing down.
7 Insert the toner cartridge so that the guide (A)
on the left side of the toner cartridge ts into
the groove inside the machine and slide it down
parallel to the guide.
8 Push the toner cartridge as far as it will go. Make
sure it is properly set in the machine.
9 Close the toner cover.
Be careful not to get your ngers caught.
10 Open the paper delivery tray (A) and the
extension (B).
Set Up the Machine

7
Load Paper
1 Lift the paper stack cover and pull it out
completely.
Make sure the back end of the cover does not catch the
front paper guide.
2 Pinch and slide the side paper guides to match
the size of paper.
3 Pull out the paper guide rail as far as it will go.
4 Fan the paper stack and even the edges.
5 Insert the paper stack print side up.
Make sure the stack height does not exceed the limit mark
(A).
Set Up the Machine

8
6 Push back the paper guide rail to the front edge
of paper.
If loading paper shorter than LTR, pinch and slide the
front paper guide (A) to match the paper size.
If loading paper other than LTR, make sure to set the
correct paper size in the machine. (See Chapter 2,
“Document and Paper,” in the Reference Guide.)
7 Insert the paper stack cover.
Make sure the back end of the cover does not catch and
lower the scanning platform (A).
–
–
8 Pull out the document delivery tray (A) and the
extension (B).
Do not open or close the document delivery tray extension
without extending the document delivery tray rst.
9 Attach the document feeder tray.
If the document you load falls down from the document
feeder, extend the document feeder tray extension.
Set Up the Machine

9
Connect the Power Cord
1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet.
2 The machine enters the standby mode.
12/31/2007 MON 15:50
FaxOnly STANDARD
Ex.
The LCD display turned o:
The machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup.
<CLOSE COVER/TONER COVER> is displayed:
Make sure that the toner cover and scanning platform are closed properly. (See “Install Toner Cartridge,”on p. 5.)
<SET PAPER AGAIN/SET TONER AGAIN> is displayed:
Check the installation of the toner cartridge and the placement of the paper. (See “Install Toner Cartridge,” on p. 5 and “Load Paper,” on p. 7.)
Any data stored in the memory, including received fax documents, will be deleted if you unplug the power cord from the machine.
●
●
●
Set Up the Machine

10
Set the Date and Time
Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
Entering Information
Numeric keys: Enters numbers.
[ ] or [ ]: Moves the cursor position.
[OK]: Conrms the entry.
●
‒
‒
‒
1 Press [Menu].
2 Press [ ] or [ ] to select <8 TIMER
SETTINGS>, then press [OK].
3 Press [ ] or [ ] to select <1 DATE&TIME
SETTING>, then press [OK].
4 Use the numeric keys to enter the time (in 24-
hour/military time format) and date (month/
day/year), then press [OK].
DATE&TIME SETTING
1 5 : 5 0 1 2 3 1 ‘ 0 7
Ex.
If you accidentally enter an incorrect number, press [ ] or
[ ] to move the cursor to the number that needs
correcting and overwrite it.
5 Press [Stop/Reset] to return to the standby
mode.
You can select one of the following three date formats in
<2 DATE TYPE SELECT>.
<MM/DD/YYYY>
<DD/MM YYYY>
<YYYY MM/DD>
By default, <4 DAYLIGHT SV.TIME> in the <8 TIMER
SETTINGS> menu is set to <OFF>.
If you want to set <4 DAYLIGHT SV.TIME> in the <8
TIMER SETTINGS> menu to <ON>, see Chapter 1,
“Before Using the Machine,” in the Reference Guide.
The LCD display turned o:
The machine may enter the sleep mode while you are setting up the
machine. Press [Energy Saver] to turn the machine back on and continue
the setup.
–
–
–
–
–
●
Set Up the Machine

11
Connect Telephone Cables
Connect the supplied telephone cable to the telephone line jack (A) on the back side of the machine and the wall jack.
If you want to connect your own external telephone or telephone with built-in answering machine, connect it to external
device jack (B) on the back side of machine.
If you want to connect the handset, connect the cable to the handset jack (C) on the back side of the machine.
External telephone and handset are both available to connect together.
●
●
●
Before FAX Setting

12
Install Handset
1
Use a screwdriver to remove the covers on the left side of
the machine.
2
Insert the plugs with pins (A) into the holes on the
handset cradle.
Do not insert the pins all the way into the plugs at this point.
3
Insert the plugs (with the cradle) into the holes on the
machine.
4
Carefully push the pins into the plugs as far as they will
go.
5
Place the handset on the cradle.
6
A
Hook the handset cable on the retainer (A) at the back of
the machine to retain the slack.
If using the handset or an external telephone, make sure to
set the fax receive mode to <FAX/TEL> or <MANUAL>. For
how to set the receive mode, see “Set the Receive Mode,” on
p. 16.
Before FAX Setting

13
By default, telephone line type on the machine is set to <TOUCH TONE>. If you use tone dialing, skip the
following procedure.
If you need to use pulse dialing, follow the procedure below and change the telephone line type setting to
<ROTARY PULSE> on the machine.
If you do not know the telephone line type you use, contact your local telephone company.
1 Press [Menu].
2 Press [ ] or [ ] to select <5 FAX SETTINGS>, then press [OK].
3 Press [ ] or [ ] to select <2 USER SETTINGS>, then press [OK].
4 Press [ ] or [ ] to select <3 TEL LINE TYPE>, then press [OK].
5 Press [ ] or [ ] to select the telephone type, then press [OK].
<TOUCH TONE>: Tone dialing (Default)
<ROTARY PULSE>: Pulse dialing
6 Press [Stop/Reset] to return to the standby mode.
If Necessary to Use Pulse Dialing
Before FAX Setting

14
Set the Machine for Sending Faxes
Use the following keys to enter information in the machine.
You can enter the following characters in each input mode:
Use the numeric keys to enter
characters.
Press the numeric key repeatedly until
the required character appears.
Press [#] to enter symbols.
Press [ ] to switch between input
modes:
[A]: Letter mode
[1]: Number mode
Press [ ] or [ ] to move the cursor
position.
Press [Clear] to delete the character at
the cursor position. Hold [Clear] to
delete the entire entry.
●
●
●
‒
‒
●
●
Entering Information

15
Registering Sender Information
1 Press [Menu].
2 Press [ ] or [ ] to select <5 FAX
SETTINGS>, then press [OK].
3 Press [ ] or [ ] to select <2 USER
SETTINGS>, then press [OK].
4 Press [ ] or [ ] to select <1 UNIT
TELEPHONE #>, then press [OK].
5 Use the numeric keys to enter your fax number
(up to 20 digits including spaces), then press
[OK]. (For information on how to enter
characters, see p. 14.)
Ex.
UNIT TELEPHONE #
123XXXXXXX
You can enter a space, -, and + by pressing [#] key in [1 unit
telephone #].
6 Press [ ] or [ ] to select <2 USER
SETTINGS>, then press [OK].
7 Press [ ] or [ ] to select <2 UNIT NAME>,
then press [OK].
8 Use the numeric keys to enter the unit name (up
to 32 characters) (your name, company name,
etc.), then press [OK]. (For information on how
to enter characters, see p. 14.)
U N I T N A M E [ A ]
Canon
Ex.
9 Press [Stop/Reset] to return to the Standby
mode.
The LCD display turned o:
The machine may enter the sleep mode while you are setting up the
machine. Press [Energy Saver] to turn the machine back on and continue
the setup.
●
Before sending documents, you MUST register your fax number, unit name, and the current date and time in the
machine.
The sender information you register in the machine appears in the header of each page received by your
recipient.
Guidelines for Entering Information
Set the Machine for Sending Faxes

16
1 Press [Menu].
2 Press [ ] or [ ] to select <5 FAX
SETTINGS>, then press [OK].
3 Press [ ] or [ ] to select <1 RX MODE>,
then press [OK].
4 Press [ ] or [ ] to select the receive mode,
then press [OK].
5 Press [Stop/Reset] to return to the standby
mode.
The LCD display turned o:
The machine may enter the sleep mode while you are setting up the
machine. Press [Energy Saver] to turn the machine back on and continue
the setup.
●
Set the Receive Mode
Select the Receive Mode that Suits Your Needs
The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode
which is most suitable for you from the chart below. For details, see “About the Receiving Modes,” on p. 17.
The remote reception function is useful when the receive mode is set to <MANUAL> and connected to an external telephone. You
can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default setting is 25). For
details, see Chapter 3,“Sending and receiving”in the Reference Guide.
Your telephone with built-in answering machine or answering machine must be connected directly to the machine for <AnsMode>
to work. (See “Connect Telephone Cables,” on p. 11.)
The external telephone must be connected to the machine for <FAX/TEL> or <MANUAL> to work. (See “Connect Telephone Cables,”
on p. 11.)
By default, <FaxOnly> is selected in <1 RX MODE>. If external telephone is connected to the machine and receives a fax or voice call,
the external telephone rings. You can answer the voice call while the external telephone is ringing.
For incoming ring to be disabled, press [Menu] →<5 FAX SETTINGS> →<4 RX SETTINGS> →<3 INCOMING RING> then select <OFF>.
Voice mail is not supported with <AnsMode>.
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive ring patterns to a single
telephone line, allowing you to have both a fax number(s) and a telephone number(s) using only one telephone line. Your fax will
automatically monitor incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Set the fax ring
pattern that matches the pattern assigned by your telephone company. Contact your telephone company for availability.
–
–
–
–
–
–
Set the Machine for Receiving Faxes

17
<FaxOnly>
Receives faxes automatically. When you use only the fax function,
select this mode without connecting to the external telephone.
Upon Receiving FAX●
The machine receives faxes
automatically.
Upon Receiving VOICE CALL●
The machine does not
respond.
About the Receiving Modes
<AnsMode>
Receives faxes automatically and routes voice calls to the telephone
with built-in answering machine.
Upon Receiving FAX●
The telephone with built-in
answering machine rings
and the machine receives
fax automatically.
Upon Receiving VOICE CALL●
The telephone with built-in
answering machine rings
and records voice
messages.
<MANUAL>
Rings for every call, whether it is a fax call or a voice call. For a fax call,
you have to manually activate reception of the fax.
Upon Receiving FAX●
The external telephone
rings.
To receive the fax, you can
either pick up the receiver
and press [Start] key or
press [Hook] key and press
[Start] key. Alternatively,
you can use the remote
reception function through
the external telephone.
Upon Receiving VOICE CALL●
The external telephone
rings. Answer the call.
<FAX/TEL>
Automatically switches between fax calls and voice calls. Receives
faxes automatically and the machine rings for voice calls.
Upon Receiving FAX●
The machine receives fax
automatically.
Upon Receiving VOICE CALL●
The machine rings. Answer
the call.
Set the Machine for Receiving Faxes

18
Software Settings with Computer
Connection Between Computer and the Machine
USB Connection (For details on how to set up, see p. 19.)
You can print the documents sent from a computer.
For details on printing documents, see Chapter 5,“Printing,” in the Reference Guide.
System Requirements
Microsoft Windows 2000
CPU: Intel Pentium/133MHz or faster
Memory: 128MB or more
Microsoft Windows XP
CPU: Intel Pentium/Celeron series
300MHz or faster
Memory: 128MB or more
Microsoft Windows Server 2003
CPU: Intel Pentium/Celeron series 133MHz or faster
Memory: 128MB or more
Microsoft Windows Vista
CPU: Intel Pentium 800MHz or faster
Memory: 512MB or more
About User Software CD
Driver
UFRII LT Driver
The Canon UFRII LT printer driver enables you to
print from any application software to the
machine. Taking full advantage of your PC’s
processing power to compress the print data,
this driver executes the high-speed data
processing.
Manual
Reference Guide
Reference Guide consists of total operation
features, system manager settings, reports and
lists, and troubleshooting.