Canon Imagepress server j200 User manual

SERVICE

MANUAL

imagePRESS

Server J200

JANUARY 21, 2009

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair

of products. This manual covers all localities where the products are sold. For this reason, there may be information in this

manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When

changes occur in applicable products or in the contents of this manual, Canon will release technical information as the need

arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition

of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered trademarks of the individual companies.

translated into another language, in whole or in part, without the written consent of Canon Inc.

Printed in Japan

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Introduction

Symbols Used

This documentation uses the following symbols to indicate special information:

Symbol Description

Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning.

Indicates an item requiring care to avoid electric shocks.

Indicates an item requiring care to avoid combustion (fire).

Indicates an item prohibiting disassembly to avoid electric shocks or problems.

Indicates an item requiring disconnection of the power plug from the electric outlet.

Indicates an item intended to provide notes assisting the understanding of the topic in question.

Indicates an item of reference assisting the understanding of the topic in question.

Provides a description of a service mode.

Provides a description of the nature of an error indication.

Memo

REF.

Introduction

The following rules apply throughout this Service Manual:

1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer-

ence to the timing of operation.

In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the

direction of the electric signal.

The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the delivery unit door, which results in

supplying the machine with power.

2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is "High", while '0' is used to indicate "Low".(The voltage value, how-

ever, differs from circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD signal goes on when '0'.

In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the operations of the microprocessors

used in the machines are not discussed: they are explained in terms of from sensors to the input of the DC controller PCB and from the output of the

DC controller PCB to the loads.

The descriptions in this Service Manual are subject to change without notice for product improvement or other purposes, and major changes will be com-

municated in the form of Service Information bulletins.

All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant Service Information bulletins and be

able to identify and isolate faults in the machine."

Contents

Chapter 1 Installation

1.1 Points to Note About Installation ................................................................................................................1- 1

1.1.1 Points to Note About Installation ............................................................................................................................. 1- 1

1.2 Checking components ................................................................................................................................1- 1

1.2.1 Checking components ............................................................................................................................................. 1- 1

1.3 Installation procedure .................................................................................................................................1- 2

1.3.1 Points to Note When Turning ON/OFF the power of Host Machine ........................................................................ 1- 2

1.3.2 Before Connection...................................................................................................................................................1- 2

1.3.3 Connecting to the Host Machine ............................................................................................................................. 1- 2

1.4 Checking the Operation After Making Settings...........................................................................................1- 4

1.4.1 Checking the Operation........................................................................................................................................... 1- 4

1.4.2 Connecting to the Network ...................................................................................................................................... 1- 5

1.4.3 Execution of Auto Gradation Correction .................................................................................................................. 1- 5

Contents

Chapter 1 Installation

Contents

1.1 Points to Note About Installation...................................................................................................................................1-1

1.1.1 Points to Note About Installation................................................................................................................................................. 1-1

1.2 Checking components....................................................................................................................................................1-1

1.2.1 Checking components.................................................................................................................................................................. 1-1

1.3 Installation procedure.....................................................................................................................................................1-2

1.3.1 Points to Note When Turning ON/OFF the power of Host Machine .......................................................................................... 1-2

1.3.2 Before Connection ....................................................................................................................................................................... 1-2

1.3.3 Connecting to the Host Machine.................................................................................................................................................. 1-2

1.4 Checking the Operation After Making Settings.............................................................................................................1-4

1.4.1 Checking the Operation ............................................................................................................................................................... 1-4

1.4.2 Connecting to the Network .......................................................................................................................................................... 1-5

1.4.3 Execution of Auto Gradation Correction..................................................................................................................................... 1-5

Chapter 1

1-1

1.1 Points to Note About Installation

1.1.1 Points to Note About Installation

0020-5844

1.2 Checking components

1.2.1 Checking components

0020-5845

F-1-1

- Media Pack

Do not hold and lift the upper part of the panel of the main unit. The cover may come off because of the weight of the main unit and fall out.

[1] PS Unit 1pc. [2]*1 Power Cord 1pc.

[3]*2 Power Cord 3pc. [4] Crossover Ethernet Cable (12m) 1pc.

[5] Straight Ethernet Cable (3m)

(For network connection)

1pc.

*1, *2ÅG The connector has a different shape depending on locations.

*2ÅG Use the correct power cable to match the location/area of installation.

Make sure not to leave unused power cable at the site.

[1]

[5]

[4]

[3]

[2]

Chapter 1

1-2

1.3 Installation procedure

1.3.1 Points to Note When Turning ON/OFF the power of Host Machine

0020-5846

1.3.2 Before Connection

0020-5848

1) Set the automatic IP address for the communication between the host machine and this equipment.

Select: Service mode > COPIER > OPTION > INT-FACE - IMG-CONT and specify [4].

2) Allocate the enough space to install the host machine as below. The back of this equipment must be 200mm or more away from the wall.

F-1-2

1.3.3 Connecting to the Host Machine

0020-5849

1) Connect the Crossover Ethernet Cable with the lower RJ45 connector [1] on the back of the PS unit.

CAUTION: Power-On Order for Turning On the Power When

Pickup/Delivery Accessories are Connected

Be sure to turn on the power in the correct order otherwise it may cause

an error because the host machine fails to recognize accessories including

this equipment.

<Power-On Order>

1) Accessories (accessories including this equipment)

2) Host machine

MEMO:

There is no power-on order among accessories.

CAUTION: Points to Note When Turning Off the Main Power of the

Host Machine

Be sure to turn off the main power in the following order to protect hard disk

of the host machine.

1) Press the power switch on control panel for 3 sec or more.

2) Follow the instruction on the shutdown sequence screen (the main power

switch will go off automatically).

3) Remove the power plug.

Backside

Side panel

200mm+ (8 in.)

200mm+

(8 in.)

PS unit

Front side

Chapter 1

1-3

F-1-3

2) Connect the Crossover Ethernet Cable [1] with the connector [2] on the back right of the host machine.

F-1-4

3) Connect the power plug of the host machine.

4) Connect the power cable with point [1] of the PS unit.

MEMO:

Use the correct power cable to match the location/area of installation.

Make sure not to leave unused power cable at the site.

[1]

[2][1]

Chapter 1

1-4

F-1-5

5) Insert the other side of the power cable to the outlet.

6) Turn ON the power switch [1] of the PS unit.

F-1-6

7) Turn ON the power of the host machine.

1.4 Checking the Operation After Making Settings

1.4.1 Checking the Operation

0020-5854

Output a test page and setting page in the following procedure to check the connection between the host machine and this equipment and this equipment's setting.

To print the setting information page:

1) With [Idle] status, press menu button once.

F-1-7

2) Press a select button and select "Print pages".

F-1-8

3) Press a select button and select "PS/PCL Test page".

4) Press a select button and select "Configration".

Print Pages

USB Media Server

Shut Down

Run Setup

Chapter 1

1-5

F-1-9

Setting information is transmitted from this equipment to the host machine and RIP and print statuses are displayed so that the actual print status can be checked.

1.4.2 Connecting to the Network

0020-5855