Canon Canonet 1 User manual

Canon
HwerShot £1
DIGITAL CAMERA
Getting Started
EGLISH
II 111111111111
CDI-E389

Chec ·
the Pac a ontents
Check if the following items are included in your camera package. If anything
is missing,
contact the retailer where you purchased the camera.
Camera
~
Interface Cable
IFC-400PCU
Canon Digital Camera
Solution Disk
if
Q
AA-size Alkaline Memory Card
Batteries (x2) (32MB)
~
~
AV Cable
Wrist Strap
AVC-DC400 WS-DC6
DD
Warranty Card
"Canon Customer
Support" Leaflet
I
rn
Getting Started
This Guide
~----------------------------~
Also refer to the electronic manuals (PDF) on the CD-ROM.
-Camera User
Guide
-Direct Print User Guide
Read when you want to connect the camera to aprinter and print.
-Software Starter Guide
Read when you want to connect the camera to acomputer.
Explains how to install and use the software
on the Canon Digital
Camera Solution Disk.
Download Zoom Browser EXllmageBrower Software Guide (PDF)
from:
http://web.canon.jp/imaginglinformation-e.htm
\
,--------------------------- ~
•You can use the included memory card to try out your new camera and
take some test shots.
Adobe Reader must be installed to view the PDF manuals.
2

Conventions Used in this Guide
•Language that displays on the screen appears inside [ ].
Buttons on the camera body are represented by the following icons.
~~~---- ~ button
J1!!!1!!!!~CJ-ii;;,;;;;;;::--- @FUNC.lSET(Function/Set)button
~ button
~ button
-~~~~-- Tbutton
--- 8MENU button
"------- 8DISP. (Display) button
@: Troubleshooting tips for common problems.
~ :Hints for getting more out of your camera.
CD: Notes for preventing malfunction.
. : Supplemental explanation.
(p. xx): xx stands for reference page number.
This guide assumes all functions are at their default settings unless
otherwise noted.
This camera can use various types of memory cards. These are
collectively referred to
as memory cards in this guide.
Electron·c
anuals (PDF)
Once you have mastered the basics, use the camera's many features to
shoot more challenging photos.
The electronic manuals (PDF) are included
in
the supplied CD-ROM.
When the installation is finished shortcut icons
will appear
on the desktop (If the software fails
to install, please find the manuals
in the
Readme folder on the CD-ROM).
3

Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction
of acamera or accessory, including memory
cards, that results
in the failure of an image to be recorded orto be recorded
in away that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never
be used in amanner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please
be advised
that
in certain cases the copying of images from performances, exhibitions,
or commercial properties by means
of acamera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
This camera's warranty is only effective in the country of sale. Ifthere is a
problem with the camera while abroad, please return it back to the country
of
sale before proceeding with awarranty claim to aCanon Customer Support
Help Desk.
For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than
99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. The
camera
is not damaged. This also has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. The camera
is not damaged.
4

5

Safety Precautions
Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
The safety precautions noted
on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
it Warnings Denotes the possibility of serious injury or death.
it Cautions Denotes the possibility of injury or damage to the equipment.
AWarnings
Equipment
Do not look through the camera viewfinder at bright light sources (the sun,
etc.).
Exposure to the intense light may damage eyesight.
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around achild's neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,
contact adoctor immediately.
Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash may damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
To
avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
Stop operating the camera immediately if it emits smoke, astrange smell, or
otherwise behaves abnormally.
Do
not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock.
If liquid
or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
Use only recommended power sources.
6

Safety Precautions
Batteries
Use only recommended batteries.
Do
not place batteries near or in direct flame.
Do
not let batteries come into contact with water (e.g. sea water) or other
liquids.
Do
not attempt to disassemble, alter or apply heat to batteries.
Avoid dropping or subjecting batteries to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings.
In the event that abattery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical
assistance.
Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
ACautions
Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunction or damage the image sensor (CCO).
Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
Be careful
not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
When using the camera on abeach or at awindy location, be careful not to
allow dust or sand to enter the camera.
This may cause the camera to malfunction.
Avoid using, placing or storing the camera in the following places.
-Places subject to strong sunlight.
-Places subject to temperatures above 400C(1040
F).
-Humid or dusty areas.
These could cause leakage, overheating or explosion, resulting
in fire, burns or other
injuries. High temperatures may also cause deformation
of the casing.
Remove and store the batteries when you are not using the camera.
Ifthe batteries are left inside the camera, damage caused by leakage may occur.
Do not use the flash with dirt, dust or other items stuck to the surface, or when
covering the flash
with your fingers or clothing.
This may cause the camera to malfunction.
For CA, USA only
Included lithium battery contains Perchlorate Material -special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchloratel for details.
7

8
LCD Monitor Precautions
Do not sit in achair with the camera in your pocket.
Doing so may cause malfunction or damage the LCD monitor.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
If this occurs, it may cause malfunction or damage the LCD monitor.
Do not attach accessories to the strap.
Doing so may cause malfunction or damage the LCD monitor.

Table of Contents
Checking the Package Contents 2
Conventions Used
in this Guide 3
Electronic Manuals (PDF) 3
Read This First 4
Safety Precautions 6
LCD Monitor Precautions 8
Attaching the Wrist Strap/Holding the Camera 9
Table of Contents 9
Inserting the Batteries and Memory Card 10
Setting the Date and Time
14
Setting the Display Language 16
Pressing the Shutter Button 17
Taking Pictures 18
Viewing Images 20
Erasing Images
21
Printing Images 22
Shooting Movies 24
Viewing Movies
26
Transferring Images to aComputer 27
Accessories
32
Separately Sold Accessories 34
Attaching the Wrist Strap/Holding the Camera
Use the included strap to avoid dropping the camera during use.
Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not touch the flash.
Wrist strap
9

Inserting the Batteries and Memory Card
Insert the included batteries and memory card into the camera.
Check the card's write-protect tab.
Ifthe memory card has awrite-protect tab,
you will not be able to take images if the
tab is in the locked position. Slide the tab
up until you hear aclick.
Open the cover.
Slide and hold the cover lock J), then
slide and open the cover
~ as shown.
Insert the batteries.
Insert the batteries with (+) and (-) sides
oriented correctly.
Insert the memory card.
Insert the memory card with the label in
the direction shown until it clicks into
place.
Be sure the card is oriented correctly.
Inserting the card
in the wrong direction
Label could damage the camera.
10

Inserting the Batteries and Memory Card
Close the cover.
Close the cover \.! and press downward
as you slide it until it clicks into place ~.
Removing the Memory Card
Push the memory card until you hear a
click, then release and pull out the card.
11

Inserting the Batteries and Memory Card
Approximate Number of Shots That Can Be Taken
Power Source
Number
of LCD monitor on*
Shots LCD
monitor off
Playback Time (Hours)
Alkaline Batteries
(Supplied)
220
650
8
NiMH Batteries
(Sold Separately)
450
1000
10
*The number of shots that can be taken is based on the Camera &Imaging Products
Association (CIPA) measurement standard.
Depending on the shooting conditions, the actual
number of shots that can be taken
may be less.
Depending on the brand
of alkaline batteries used, the number of shots that can be
taken
may vary widely.
The values for NiMH batteries are based on fully charged batteries.
Compatible Batteries
AA-size alkaline batteries and Canon AA-size NiMH batteries (sold separately)
(p. 32).
Can any other batteries be used?
We cannot recommend the use of any other batteries than those listed above
because performance varies widely.
,,
Why use NiMH batteries?
They last much longer than alkaline batteries, especially in cold weather.
Battery Charge Indicator
When battery charge is low, an icon or message will appear on the screen. Ifthe
batteries are charged, the icon or message will not display.
12
Display
Ol
'Change the batteries."
Summary
Battery charge is low. Prepare new batteries to
continue using the camera.
The batteries are depleted. Insert
new
batteries.

Inserting the Batteries and Memory Card
Approximate Numberof Shots That Can Be Saved in aMemory
Card
Memory card
!:=::=::.":;::.;::::;;;,:::-= :;;:::;:::;:::::::::;
Number of Shots
32 MB (supplied)
11
2GB
749 8GB
2994
Values are based on acamera at default settings.
The number of shots that
can be saved will vary depending on camera settings, the
subject and the memory card used.
How do you check the number of shots that can be saved?
The number of shots that can be saved appear on the screen when the camera
is in Shooting Mode (p. 18).
Number of shots that
can be saved
Compatible Memory Cards
SO memory cards
SOHC memory cards
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
What is the Write-Protect Tab?
SO and SOHC memory cards have awrite-protect tab. Ifthis tab is in the locked
position, "Card Locked!" will appear on the screen and you will not
be able to
take
or erase images.
13

Setti
he Da e and Time
The DatefTime menu will appear the first time the camera is turned on. Since
the date and time recorded into your images are based on these settings, be
sure to make them.
Turn on the camera.
Press the power button.
The DatefTime menu will appear.
Set the Date and Time.
Press the ~ ~ buttons to select asetting.
Press the
A. ... buttons to set avalue.
Make the setting.
Press the @button.
Once the date and time have been set,
the DatefTime menu will close.
14

Setting the Date and Time
Changing the Date and Time
You can change the date and time as needed.
Display the menus.
Press the ebutton.
Select [Date/Time] in the tT tab.
Press the ~ buttons to select the tT tab.
Press the ........ buttons to select [Datel
Time], then press the @button.
Change the date and time.
Follow Steps 2and 3 on the left page to
change the date and time.
To close the menus, press the ebutton.
Reappearing Date/Time Menu
Set the correct date and time. If you have not set the date and time, the Date!
Time menu will appear each time you turn on the camera.
If you removed the batteries from the camera, it is possible that the DatelTime
settings are deleted after approximately 3weeks.
If this occurs, set the date and
time again.
This camera is equipped with abuilt-in rechargeable lithium ion battery to
save the DatelTime settings. You can recharge the battery when inserting
AA-size alkaline batteries
or using the separately sold AC adapter, within
approximately 4hours. You do not need to turn the camera
on for
charging the battery.
15

Setting the Display Language
You can change the language displayed on the screen menus and
messages.
Set to Playback mode.
Press the [E button.
-Display the language menu.
Press and hold the @button CD Ithen
press the ebutton
®.
Set the display language.
Press the ... T ~ ~ buttons to select a
language, then press the @button.
Once the display language has been set,
the language menu will close.
You can also change the language by pressing the 8button, in the tT
tab, selecting [Language].
16

Pressing the hutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
The camera focuses and automatically
makes necessary settings for shooting,
such as adjusting brightness and color.
When the camera focuses, it will beep
twice and the indicator will light green.
Press fully (to the second stop).
The camera takes the shot.
Ifyou just press the shutter button fully without pausing halfway, the
images you take may not be
in focus.
17

Tak-ng Pictures
The camera can automatically make all settings so that you can shoot simply
by pressing the shutter button (Auto mode).
Turn on the camera.
Press the power button.
The start-up sound will play, and the start-
up image will appear.
Pressing the power button again will turn
off the camera.
Select ashooting mode.
Set the mode dial to tmID.
Compose the shot ofyour subject.
Moving the zoom lever towards [tJ will
zoom in on your subject making it appear
larger. Moving the lever towards
IillJ will
zoom out from your subject making it
appear smaller.
4Focus.
• ~ Press the shutter button lightly (halfway)
~ - r.-~ to focus.
.
~ - ~ When the camera focuses, it will beep
@~\ ~ twice and the indicator will light green
II ~~ (orange when the flash will fire).
-
- ==::::--------- ... '
Indicator
Green AF frames appear where the
subject is
in focus.
18

Taking Pictures
Shoot.
Press the shutter button fully.
The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
The indicator will blink green while the
image
is recorded to the memory card.
The image will appear on the screen for
about two seconds. You can continue
shooting while the image displays.
What if .•.
nothing displays when the camera is turned on?
Press the 8button to turn on the screen.
the camera does not play any sounds?
Pressing the ebutton while turning on the camera power will turn off all
sounds except for warning sounds. To turn on sound, press the 8button,
select the
tT tab, then select [Mute]. Use the ~ ~ buttons to select [Off].
the image comes out dark even the flash fired when shooting?
Subject is too far away for the flash to reach. Shoot the image within the
effective flash range
of approximately 30 cm -4.0 m(1.0 -13 ft.) at maximum
wide angle
(Iilll side), and approximately 30 cm -2.0 m(1.0 -6.6 ft.) at
maximum telephoto
(ctJ side).
the indicator blinks yellow and the camera only beeps once when the
shutter button is pressed halfway?
Your subject is too close. Move about 50 cm (1.6 ft.) or more away from your
subject. Press the shutter button again halfway, making sure the indicator does
not blink yellow before taking the picture.
the screen turns off when you take an image?
When flash recharging begins, the indicator may blink orange and the screen
may turn off. When recharging ends, the screen turns
on again.
the lamp lights?
The lamp (Red-Eye Reduction Lamp) lights in order to reduce the red-eye effect
that occurs when shooting in dark conditions using the flash. It also emits when
assisting the focus (AF-assist Beam).
19

Viewing Images
You can view the images you have taken on the screen.
Set to Playback mode.
Press the (::EJ button.
The last image you took will appear.
Select an image.
Pressing the ~ button will cycle through
the images in the reverse order they were
taken.
Pressing the
~ button will cycle through
the images in the order they were taken.
The images change more quickly if you
keep the
~ buttons pressed, but they
will appear coarse.
Easy mode
\ I I
@Recommendation for beginners: @Easy mode
Just setting the mode dial to @ (Easy mode) allows you to shoot and playback images.
This mode is recommended for beginners, who are not familiar using cameras.
Set the mode dial to [iJ.
Shoot.
Press the shutter button lightly (halfway)
to focus.
Agreen AF frame displays where the
subject is
in focus.
Press the shutter button fully to shoot.
Viewing Images.
Press the (::EJ button.
Press the
~ ~ buttons to display the
images you want to view.
20