Canon Digital IXUS 500HS User manual

DIGITAL CAMERA
Camera User Guide
Please read the Read This First section (p. 7).
Please also read the Software Starter Guide and the Direct Print User Guide.
CDI-E117-010 XXXXXXX © 2004 CANON INC. PRINTED IN JAPAN
Camera User Guide
ENGLISH

Flowchart and Reference Guides
Use of genuine Canon accessories is recommended.
This product is designed to perform optimally when used with
genuine Canon accessories. Canon shall not be liable for any damage
to this product and/or accidents such as fire, etc., caused by the
malfunction of non-genuine Canon accessories (e.g., a leakage and/
or explosion of a battery pack). Please note that this warranty does
not apply to repairs arising out of the malfunction of non-genuine
Canon accessories, although you may request such repairs on a
chargeable basis.
Shooting with the Camera
This Guide
This Guide
Software Starter Guide
Software Starter Guide
Direct Print User Guide
Printer User Guide
Installing the Software
Connecting the Camera to a Computer
Downloading Images to a Computer
Using the Printer and Printing
This Guide

1
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for
an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less
than 0.01% of the pixels may occasionally misfire or appear as red or black
dots. This has no effect on the recorded image and does not constitute a
malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region
before using it with a TV monitor (p. 127).
Charging the Date/Time Battery
• The camera has a built-in rechargeable lithium battery that maintains the
date, time and other camera settings. This battery recharges when the
main battery pack is inserted into the camera. When you first purchase the
camera, place a charged battery pack in it or use the AC adapter kit (sold
separately) for at least 4 hours to charge the date/time battery. It will
charge even when the camera power is set to Off.
• If the Date/Time menu appears when the camera power is turned on, it
means that the date/time battery charge is depleted. Recharge it as
described above.

2
About This Guide
Conventions Used in the Text
Question? Look Here First
What settings are available
under each function? •See Functions Available in Each
Shooting Mode (p. 160).
Will my settings remain in
effect even after I’ve turned
the camera off?
What can be accomplished
with each function?
•See FUNC. MENU (p. 44).
•See Rec. Menu (p. 47).
•See Play Menu (p. 48).
•See Set up Menu (p. 48).
•See My Camera Menu (p. 51).
What do the icons listed in
the Camera User Guide
mean?
•See Information Displayed on the
LCD Monitor (p. 35).
•See Menu Settings and Factory
Defaults (p. 47).
: This mark denotes issues that may affect the camera’s operation.
: This mark denotes additional topics that complement the basic
operating procedures.
Icons on the right end of title bars show the applicable operating modes.
As in the example below, the procedure can be performed in (Auto),
(Manual), (Stitch Assist) or (Movie) mode.
Using the Self-timer

3
Preparing the Camera 18
Basic Functions 30
Shooting 53
Playback 89
Erasing 105
Print Settings/Transferring 108
Connecting the Camera to a Computer/TV 118
My Camera Settings 129
List of Messages
134
Troubleshooting 136
Appendix 140
Photo Tips and Information 153
Thumb Index

4
Read This First .................................................. 7
Please Read............................................................................................... 7
Safety Precautions..................................................................................... 8
Preventing Malfunctions .......................................................................... 13
Components Guide .............................................14
Preparing the Camera
Charging the Battery Pack ....................................................................... 18
Installing the Battery Pack ....................................................................... 21
Installing the CF Card .............................................................................. 23
Setting the Date and Time ....................................................................... 26
Setting the Language............................................................................... 28
Basic Functions
Turning the Power On.............................................................................. 30
Switching Between Shooting/Playback.................................................... 32
Using the LCD Monitor ............................................................................ 33
Information Displayed on the LCD Monitor ............................................. 35
Using the Viewfinder ............................................................................... 39
Using the Zoom ....................................................................................... 40
Pressing the Shutter Button .................................................................... 41
Selecting Menus and Settings ................................................................. 43
Menu Settings and Factory Defaults ........................................................ 47
Resetting Settings to Their Default Values............................................... 52
Shooting
Shooting in Auto Mode ..................................................................... 53
Reviewing an Image Right after Shooting................................................ 54
Changing Resolution/Compression Settings ........................................... 55
Quick Shots ............................................................................................. 57
Using the Flash ................................................................................... 58
Shooting Close-Ups/ Infinity Shots.............................................. 60
Using the Digital Zoom............................................................................ 62
Continuous Shooting ......................................................................... 63
Using the Self-timer........................................................................... 64
Shooting in Manual Mode ............................................................... 66
Shooting Panoramic Images (Stitch Assist)..................................... 67
Table of Contents
Items marked with are lists or charts that summarize camera functions or
procedures.

5
Shooting a Movie............................................................................... 70
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) ........................ 72
Locking the Exposure Setting (AE Lock).................................................. 74
Locking the Flash Exposure Setting (FE Lock) ......................................... 75
Switching between Focusing Modes ........................................................ 76
Switching between Light Metering Modes......................................... 77
Adjusting the Exposure Compensation .................................................... 78
Shooting in Long Shutter Mode ............................................................... 79
Adjusting the Tone (White Balance) ......................................................... 81
Changing the Photo Effect........................................................................ 84
Adjusting the ISO Speed .......................................................................... 85
Setting the Auto Rotate Function ............................................................. 86
Resetting the File Number........................................................................ 87
Playback
Displaying Images Individually................................................................. 89
Magnifying Images............................................................................. 90
Viewing Images in Sets of Nine (Index Playback) ............................ 91
Viewing Movies........................................................................................ 93
Editing Movies ......................................................................................... 95
Rotating Images in the Display ................................................................ 97
Attaching Sound Memos to Images ......................................................... 98
Automated Playback (Slide Shows) ....................................................... 100
Protecting Images.................................................................................. 104
Erasing
Erasing Single Images ..................................................................... 105
Erasing All Images ................................................................................. 106
Formatting CF Cards .............................................................................. 107
Printing
About Printing........................................................................................ 108
Setting the DPOF Print Settings ............................................................. 110
Image Transmission Settings (DPOF Transfer Order)
Selecting Images for Transferring.......................................................... 116
Connecting the Camera to a Computer
Connecting the Camera to a Computer .................................................. 119
Computer System Requirements.................................................... 119
Downloading Images by Direct Transfer ................................................ 123

6
Connecting the Camera to the Computer to Download Images without
Installing Software .......................................................................... 125
Downloading Directly from a CF Card ....................................................126
Viewing Images on a TV set.................................... 127
Customizing the Camera (My Camera Settings)
Changing My Camera Settings .............................................................. 129
Registering My Camera Settings ........................................................... 131
List of Messages ............................................. 134
Troubleshooting .............................................. 136
Appendix
Using an AC Adapter Kit (Sold Separately)............................................ 140
Using a Car Battery Charger (Sold Separately) ...................................... 141
Camera Care and Maintenance .............................................................. 142
Specifications ........................................................................................ 143
Photo Tips and Information
Tip for Using the Self-timer ................................................................... 153
How to adjust the exposure ................................................................... 153
ISO Speed.............................................................................................. 154
Advanced Technique for the Macro mode ............................................. 154
Index ........................................................... 155
Functions Available in Each Shooting Mode ............. 160

7
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that
you shoot several trial images to confirm that the camera is operating and
being operated correctly.
Please note that Canon, its subsidiaries and affiliates, and its distributors
are not liable for any consequential damages arising from any malfunction
of a camera or accessory, including CF cards, that results in the failure of an
image to be recorded or to be recorded in a format that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from performances, exhibitions,
or commercial properties by means of a camera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If a problem
arises while the camera is in use abroad, please convey it back to the
country of sale before proceeding with a warranty claim to a Canon
Customer Support Help Desk.
For Canon Customer Support contacts, please see the Canon Limited
Warranty supplied with your camera.

8
Safety Precautions
• Before using the camera, please ensure that you read and understand the
safety precautions described below. Always ensure that the camera is
operated correctly.
• The safety precautions noted on the following pages are intended to
instruct you in the safe and correct operation of the camera and its
accessories to prevent injuries or damage to yourself, other persons and
equipment.
• In the next few pages, the term “equipment” refers primarily to the camera
and its power supply accessories, such as the battery charger and
optional compact power adapter or car battery charger.
Warnings
• Do not aim the camera directly into the sun or at other intense light
sources that could damage your eyesight.
•Do not trigger the flash in close proximity to human or animal eyes.
Exposure to the intense light produced by the flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from infants
when using the flash.
•Store this equipment out of the reach of children and infants. Accidental
damage to the camera or batteries by a child could result in serious injury.
In addition, placement of the strap around the child’s neck could result in
asphyxiation.
•Do not attempt to disassemble or alter any part of the equipment that is
not expressly described in this guide. Disassembly or alteration may
result in high-voltage electrical shock. Internal inspections, alterations and
repairs should be conducted by qualified service personnel authorized by
your camera distributor or a Canon Customer Support Help Desk.
•To avoid the risk of high-voltage electrical shock, do not touch the flash
portion of the camera if it has been damaged. Similarly, never touch
internal portions of the equipment that become exposed as a result of
damage. There is a risk of high-voltage electrical shock. Please take the
first opportunity to consult your camera distributor or the closest Canon
Customer Support Help Desk.

9
•Stop operating the equipment immediately if it emits smoke or noxious
fumes. Failure to do so may result in fire or electrical shock. Immediately
turn the camera power off, remove the camera battery or unplug the
power cable from the power outlet. Confirm that smoke or fume
emissions have ceased. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
•Stop operating the equipment if it is dropped or the casing is damaged.
Failure to do so may result in fire or electrical shock. Immediately turn the
camera power off, remove the camera battery or unplug the power cable
from the power outlet. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
•Do not allow the equipment to come into contact with, or become
immersed in, water or other liquids. Do not allow liquids to enter the
interior. The camera has not been waterproofed. If the exterior comes into
contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If
water or other foreign substances enter the interior, immediately turn the
camera power off and remove the camera battery or unplug the power
cable from the power outlet. Continued use of the equipment may result in
fire or electrical shock. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
•Do not use substances containing alcohol, benzene, thinners or other
flammable substances to clean or maintain the equipment. The use of
these substances may lead to fire.
•Remove the power cable on a regular periodic basis and wipe away the
dust and dirt that collects on the plug, the exterior of the power outlet
and the surrounding area. In dusty, humid or greasy environments, the
dust that collects around the plug over long periods of time may become
saturated with humidity and short-circuit, leading to fire.
•Do not cut, damage, alter or place heavy items on the power adapter
cable. Any of these actions may cause an electrical short circuit, which
may lead to fire or electrical shock.
•Do not handle the power cable if your hands are wet. Handling it with
wet hands may lead to electrical shock. When unplugging the cable,
ensure that you hold the solid portion of the plug. Pulling on the flexible
portion of the cable may damage or expose the wire and insulation,
creating the potential for fires or electrical shocks.

10
•Use only recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating,
distortion of the equipment, fire, electrical shock or other hazards.
•Do not place the batteries near a heat source or expose them to direct
flame or heat. Neither should you immerse them in water. Such exposure
may damage the batteries and lead to the leakage of corrosive liquids, fire,
electrical shock, explosion or serious injury.
•Do not attempt to disassemble, alter or apply heat to the batteries.
There is serious risk of injury due to an explosion. Immediately flush with
water any area of the body - including the eyes and mouth, or clothing -
that comes into contact with the inner contents of a battery. If the eyes or
mouth contact these substances, immediately flush with water and seek
medical assistance.
•Avoid dropping or subjecting the batteries to severe impacts that could
damage the casings. It could lead to leakage and injury.
•Do not short-circuit the battery terminals with metallic objects, such as
key holders. It could lead to overheating, burns and other injuries. Use
the supplied terminal cover to transport or store the battery pack.
•Before you discard a battery, cover the terminals with tape or other
insulators to prevent direct contact with other objects. Contact with the
metallic components of other materials in waste containers may lead to
fire or explosions. Discard the batteries in specialized waste facilities if
available in your area.
•Use only recommended batteries and accessories. Use of batteries not
expressly recommended for this equipment may cause explosions or
leaks, resulting in fire, injury and damage to the surroundings.
•Use the specified battery charger to charge Battery Pack NB-1LH or NB-
1L. Use of other chargers may lead to overheating, distortion of the
equipment, fire or electrical shock.
•Disconnect the battery charger and compact power adapter from both
the camera and the power outlet after recharging and when it is not in
use to avoid fire and other hazards. Continuous use over a long period
may cause a unit to overheat and distort, resulting in fire.

11
•The camera terminals of the battery charger and compact power
adapter are designed for exclusive use with your camera. Do not use
them with other products or batteries. There is a risk of fire and other
hazards.
Caution about magnetic fields
Keep objects that are sensitive to magnetic fields (such as credit cards)
away from the speaker of the camera (p. 14). Such items may lose data
or stop working.

12
Cautions
•Avoid using, placing or storing the equipment in places subject to
strong sunlight or high temperatures, such as the dashboard or trunk
(boot) of a car. Exposure to intense sunlight and heat may cause the
batteries to leak, overheat or explode, resulting in fire, burns or other
injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the battery charger to
charge the battery pack.
•Do not store the equipment in humid or dusty areas. Storage in such
areas could lead to fire, electrical shock or other damage.
• Be careful not to bang the camera or subject it to strong impacts or
shocks that could lead to injury or damage the equipment when
wearing or holding it by the strap.
•Be careful not to cover the flash with your fingers or clothing when
shooting. The flash may be damaged and emit smoke or noise. In
addition, do not touch the surface of the flash after taking several pictures
in rapid succession. Either action could result in burns.
•Do not operate the flash with dirt, dust or other items stuck to its lens.
The resulting heat build-up could damage the flash.
•Ensure that the battery charger is plugged into a power outlet of the
specified rating, not over the specified rating. The plug of the battery
charger varies according to region.
• Do not use the battery charger or compact power adapter if the plug or
cable is damaged, or if the plug is not fully inserted into the power
outlet.
• Do not allow metal objects (such as pins or keys) or dirt to contact the
charger terminals or plug.
•If your camera is used for prolonged periods, the camera body may
become warm. Please take care when operating the camera for extended
periods as your hands may experience a burning sensation.

13
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other
equipment generating strong electromagnetic fields. Exposure to strong
magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may
cause condensation (water droplets) to form on its external and internal
surfaces. You can avoid this by placing the equipment in an airtight,
resealable plastic bag and letting it adjust to temperature changes slowly
before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued
use may damage the equipment. Remove the CF card, battery pack or
compact power adapter from the camera and wait until the moisture
evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the
battery pack and store the equipment in a safe place. Storing the camera for
extended periods with a battery pack installed will run down the battery
pack and may damage the camera. The date, time and other camera settings
may reset to default settings if the battery pack has been removed for more
than three weeks. Follow the instructions in this guide to reset the desired
settings.

14
Components Guide
Front View
* Be careful not to wave the camera about or catch it on other items when
dangling it from the wrist strap.
AF-assist Beam (p. 42)
Red-eye Reduction Lamp (p. 58)
Self-timer Lamp (p. 64)
Flash (p. 58)
Lens
Microphone (p. 98)
Wrist Strap Mount
Attaching the Wrist Strap*
Speaker
Viewfinder Window (p. 39)
Terminal Cover
DIGITAL Terminal (p. 120)
A/V Out (Audio/Video Out)
Terminal (p. 127)

15
Preparing the Camera
Back View
LCD Monitor (p. 33)
Tripod Socket
CF Card Slot Cover (p. 23)
Battery Cover (p. 21)
Viewfinder (p. 39)
DC Coupler Terminal
Cover (p. 140)
Lock for the CF Card Slot
Cover (p. 23)
The following cables are used to connect the camera to a computer or
printer.
Computer (p. 118)
Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (Sold Separately)
•CP Printers
Interface Cable IFC-400PCU (supplied with camera) or the Direct
Interface Cable DIF-100 (supplied with the CP-100/CP-10).
• Bubble Jet Printers
-Bubble Jet Direct Compatible Printers:
Please refer to your Bubble Jet printer user guide.
-PictBridge Compliant Printers:
Interface Cable IFC-400PCU (supplied with the camera)
•PictBridge Compliant Non-Canon Printers:
Interface Cable IFC-400PCU (supplied with the camera)
Please refer to the System Map or the Direct Print User Guide supplied
with the camera for direct print compatible printer information
.

16
Operation Panel
Power Lamp
Lights when the power is on or transmission preparations
are complete when connected to a computer
Shutter Button (p. 41)
(Light Metering) Button (p. 77)/
Button
(Flash) Button (p. 58)/
Button
(Continuous) Button (p. 63)/
(Self-timer) Button (p. 64)/
Button
Shooting Mode Dial (p. 53)
(Macro) / (Infinity) Button (p. 60)/
Button
SET Button
MENU Button
Indicators (p. 17) ON/OFF Button (p. 30)
Zoom Lever
Shooting:
(Telephoto)/
(Wide Angle) (p. 40)
Replay:
(Magnify) (p. 90)/
(Index) (p. 91)
Mode Switch (p. 32)
Print/Share Button
(See below)
FUNC. (Function) Button (p. 43)/
(Single Image Erase) Button (p. 105)
DISP. (Display) Button (p. 33)
The following operations are accessible through one easy press of the
(Print/Share) button.
• Printing: See the Direct Print User Guide (separate from this guide)
• Downloading images (Windows only): See p.118 of this guide and the
Software Starter Guide (separate from this guide)
The indicator blinks or lights during a printer or computer connection.
Blue: Ready to print/Ready to transfer images
Blinking blue: Printing/Transferring

17
Preparing the Camera
Indicator
The indicator lights or blinks when the ON/OFF button or shutter button is
pressed.
Upper Indicator
Green: Ready to shoot
Blinking Green: Recording to CF card / Reading CF card / Erasing from CF
card/Transmitting data (during a computer connection)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
Lower Indicator
Yellow: Macro mode / Infinity mode/ AF lock
Blinking Yellow: Focusing difficulty (single beep).
Although you can still press the shutter button when the
indicator blinks yellow, you are recommended to shoot
using the focus lock or AF lock (p. 72).

18
Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time you
use the camera or when the “Change the battery pack” message displays.
To protect the battery pack and prolong its life, do not charge it for
longer than 24 hours continuously.
1Insert the battery pack into the
battery charger.
Align the battery pack according to the
arrows on the battery and the charger.
Insert the battery securely.
2Battery charger model names and types
vary by region.
(For CB-2LS)
Plug the battery charger into a
power outlet.
(For CB-2LSE)
Attach the power cord to the battery
charger and plug it into a power outlet.
• The charge indicator will light red while
the battery pack is charging. It will change
to green when the charge is complete.
• After charging, unplug the battery charger
and remove the battery pack.
Charge Indicator