Canon ELPH130IS IXUS 140 User manual

CaHOH
_ower_ho_:
GLPH 130 IS
I',t
,,US 140
_ower_hot
[ELPH 120 IS
I%/
,,,US 135
_ower_hot
(_LPH 1 1 5 IS
,,,US 132
o Make sure you read this guide, including the "Safety
Precautions" section, before using the camera.
+ Reading this guide will help you learn to use the camera
properly.
o Store this guide safely so that you can use it in the
future.
+ Click the buttons in the lower right to access other pages.
_: Next page
_: Previous page
_: Page before you clicked a link
+ To jump to the beginning of a chapter, click the chapter
title at right.
From chapter title pages, you can access topics by
clicking their titles.
@@
@CANON INC. 2013 CDD-E537-010 1

Beforeuse,makesurethefollowingitemsareincludedinthepackage.
Ifanythingismissing,contactyourcameraretailer.
....................... BatteryPack
NB-11L
Camera BatteryCharger
CB-2LF/CB-2LFE
WarrantyCard
WristStrap GettingStarted
WS-800
............................................................................................... s,
* Contains software and PDF manuals (18).
oA memory card is not included (j j 2).
The following memory cards (sold separately) can be used, regardless of capacity.
o SD memory cards*
o SDHC memory cards*_,_l_,.
SDXC memory cards*_C"
* Cards conforming to SD standards. However, not all memory cards have been verified
to work with the camera.
o Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that result in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
o images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
o The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
o Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or may
appear as red or black dots. This does not indicate camera damage or
affect recorded images.
o The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
o When the camera is used over an extended period, it may become warm.
This does not indicate damage.
@@
2

Zoomlever
Shooting:<E_-](telephoto)>/
<[_i] (wide angle)>
Playback: <O, (magnify)> /
<_ (index)>
(8 Lens
@ Speaker
Shutter button
(5) Lamp
Power button
Microphone
(8) Flash
®Wi-Fi antenna area
@ Tripod socket
@ Memory card/battery cover
@ DC coupler cable port
@ Strap mount
o Instructions in this guide apply to the camera under default settings.
o For convenience, all supported memory cards are simply referred to as
the "memory card".
o The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Indicates that the function is used when shooting or
viewing still images.
Indicates that the function is used when shooting or
viewing movies.
@) Screen (LCD monitor)
@ <F_ (Playback)> button
® Movie button
@ Mode switch
® AV OUT (Audio/video output) /
DIGITAL terminal
® Indicator
@)<MENU>button
®_® ®
<1_ (Exposure compensation)> /
<({T_)(Wi-Fi)> /Up button
<1_ (Exposure compensation)> /
Up button
® <_ (Macro)> /Left button
@ FUNC./SET button
@ <_, (Flash)> /Right button
@ <DISR (Display)> /Down button
The following icons are used to indicate functions that differ depending
on the camera model:
$: Functions and precautions for the PowerShot ELPH 130
IS/IXUS 140 only
: Functions and precautions for the PowerShot ELPH 120
IS/IXUS 135 only
$: Functions and precautions for the PowerShot ELPH 115
IS/IXUS 132 only
_}_ii!_!_i_ii_!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!;!!_!!_!i_!i_!_¸I
@@

o This guide uses PowerShot ELPH 130 IS/IXUS 140 illustrations and
screenshots for all explanations.
o In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
o The following camera buttons and controls are represented by icons.
<A> Up button ®on back
<,_> Left button @ on back
<_ > Right button @ on back
<,v> Down button @ on back
o Shooting modes and on-screen icons and text are indicated in brackets.
o(!}: Important information you should know
o 8: Notes and tips for expert camera use
o _}_i_xx:Pages with related information (in this example, "xx" represents a
page number)
@@

Package Contents ......................... 2
Compatible Memory Cards ............ 2
Preliminary Notes and Legal
Information ..................................... 2
Part Names and Conventions in
This Guide ...................................... 3
Tabie of Contents ........................... 5
Contents: Basic Operations ........... 6
Safety Precautions ......................... 7
Basic Guide .................... 10
Initial Preparations ....................... II
Trying the Camera Out ................ I5
Software, PDF Manuals
(on the inctuded CD-ROM) .......... 18
Downloadabte Software ............... 22
System Map ................................. 26
Advanced Guide ............. 28
Camera Basics ..................... 28
On/Off .......................................... 29
Sh utter Button .............................. 30
Shooting Display Options ............ 30
FUNC. Menu ................................ 31
MENU Menu ................................ 32
Indicator Display .......................... 33
Clock ............................................ 33
Smart Auto Mode ................. 34
Shooting (Smart Auto) ................. 35
Common, Convenient Features...39
Image Customization Features....42
Helpful Shooting Features ........... 44
Customizing Camera Operation ..46
,i Other Shooting Modes ........ 48
Specific Scenes ........................... 49
Applying Special Effects .............. 50
Special Modes for Other
Purposes ...................................... 54
"_ P Mode .................................. 58
Shooting in Program AE
([P] Mode) .................................... 59
Image Brightness
(Exposure Compensation) ........... 59
Color and Continuous Shooting...61
Shooting Range and Focusing ....64
Flash ............................................ 68
Other Settings .............................. 69
_!i_ Playback Mode .................... 70
Viewing ........................................ 7I
Browsing and Filtering Images ....73
Image Viewing Options ................ 74
Protecting Images ........................ 76
Erasing Images ............................ 78
Rotating Images ........................... 80
Image Categories ........................ 81
Editing Still Images ...................... 82
Editing Movies .............................. 85
_ Wi-Fi Functions ................... 87
What You Can Do With Wi-Fi ....... 88
Using Wi-Fi to Send Images
From the Camera ......................... 89
Wi-Fi (Wireless LAN)
Precautions .................................. 89
Security Precautions .................... 90
Glossary ....................................... 9I
Registering a Camera Nickname
(First time only) ............................ 92
Connecting to Web Services ........ 93
Connecting to aSmartphone ....... 95
Connecting to Another Camera ,..97
Connecting to a Computer ........... 98
Connecting to a Printer .............. 103
Sending Images ......................... 105
Sending Images to a Computer
via CANON iMAGE
GATEWAY .................................. 107
Geotagging Images on
the Camera ................................ 107
Editing or Erasing Wi-Fi
Settings ...................................... 108
_ Setting Menu ...................... t10
Adjusting Basic Camera
Functions ................................... 111
_Accessories ....................... t17
Optional Accessories ................. 118
Using Optional Accessories ....... 119
Printing Images .......................... 121
_ Appendix ............................ 129
Troubleshooting ......................... 130
On-Screen Messages ................ 133
On-Screen Information .............. 135
Functions and Menu Tables ....... 138
Handling Precautions ................. 144
Specifications ............................. 144
Index .......................................... 148
i_ii_i_iii_i_iii!i!iii!i!iii!iiiii_i__ii!i!ii!ii!ii!!i!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!i!!ii!
@@

Shoot
® Use camera-determined settings (Auto Mode) .................................... 35
Shooting people iell
Portraits Against Snow
(: 49) (: 49)
(::::49)
Applying special effects
Vivid Colors Poster Effect Fish-Eye Effect
(50) (50) (50)
Miniature Effect Toy Camera Effect Monochrome
(51) (52) (52)
® Focus on faces ......................................................................... 35, 49, 65
® Without using the flash (Flash Off) ....................................................... 41
® include yourself in the shot (Self-Timer) ........................................ 39, 55
® Add a date stamp ................................................................................. 41
[] View
® View images (Playback Mode) ............................................................. 71
® Automatic playback (Slideshow) .......................................................... 75
® On a TV ............................................................................................... 119
® On a computer ..................................................................................... 19
® Browse through images quickly ........................................................... 73
® Erase images ....................................................................................... 78
J_ Shoot/View Movies
® Shoot movies ....................................................................................... 35
® View movies (Playback Mode) ............................................................. 71 @@
6

r_ Print
® Print pictures ...................................................................................... 121
Eli Save
@ Save images to a computer via a cable ............................................... 19
I"_'_'_
Use Wi-Fi Functions
@ Send images to a smartphone ............................................................. 95
@ Share images online ............................................................................ 98
@ Send images to a computer ............................................................... 107
o Before using the product, please ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
o The safety precautions noted on the following pages are intended to
prevent injuries to yourself and other persons, or damage to the equipment.
o Be sure to also check the guides included with any separately sold
accessories you use.
o Do not trigger the flash in close proximity to people's eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least 1 meter (39 inches) away from infants when using the flash.
*Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child's neck could result in asphyxiation.
o Use only recommended power sources.
o Do not attempt to disassemble, alter or apply heat to the product.
o Avoid dropping or subjecting the product to severe impacts.
o To avoid the risk of injury, do not touch the interior of the product if
it has been dropped or otherwise damaged.
o Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
o Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
o Do not let the product come into contact with water (e.g. sea water)
or other liquids.
oDo not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior,
immediately turn the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult
your camera retailer or a Canon Customer Support Help Desk. @@
7

*Use only the recommended battery.
*Do not place the battery near or in direct flame.
° Unplug the power cord periodically, and using adry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
° Do not handle the power cord with wet hands.
° Do not use the equipment in a manner that exceeds the rated capacity
of the electrical outlet or wiring accessories. Do not use if the power
cord or plug are damaged, or not fully plugged into the outlet.
° Do not allow dirt or metal objects (such as pins or keys) to contact
the terminals or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
° Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the camera in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
_ IIIII:_H IIII1:_
° Do not play the supplied CD-ROM(s) in any CD player that does not
support data CD-ROMs.
it is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on an audio CD player (music player).
Additionally, this could damage the speakers.
oWhen holding the camera by the strap, be careful not to bang it, subject
it to strong impacts or shocks, or let it get caught on other objects.
*Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
*Be careful not to subject the screen to strong impacts.
if the screen cracks, injury may result from the broken fragments.
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
*Avoid using, placing or storing the product in the following places:
-Places subject to direct sunlight
-Places subject to temperatures above 40 °C (i04 °F)
= Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, fire, burns or other injuries.
H!gh batterychargercasing.
* The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
*Do not aim the camera at bright light sources (such as the sun on a
clear day).
D°!ng S° may damage !he !mage seas°!: ................................................................................................................................................................
*When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
This may cause the product to malfunction.
°In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials
stuck to the front of the unit. Please use acotton swab to remove dirt, dust or other
foreign matter from the flash to prevent heat build-up and damage to the unit.
.................................... ..............= ...............................................................................................
*Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
*Before you discard the battery, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions. @@
8

*Unplug the battery charger from the power outlet after charging is
complete, or when you are not using it.
*Do not place anything, such as cloth, on top of the battery charger
while it is charging.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
o Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion,
resulting in fire or damage.
o Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
oWhen putting the camera in your bag, ensure that hard objects do
not come into contact with the screen.
oDo not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
@@

Gives basic instructions, from initial preparations to
shooting, playback, and saving on a computer
initial Preparations ................... 1t
Trying the Camera Out ............. 15
Software, PDF Manuals
(on the included CD=ROM) ..... 18
Downloadable Software ........... 22
System Map .............................. 26 @@
10

Prepare for shooting as follows.
theStrap
@ Thread the end of the strap through the
strap hole (_), and then pull the other
end of the strap through the loop on the
threaded end (@).
y ...............
pHolding the Camera
@ Place the strap around your wrist.
@ When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your fingers on the flash.
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
insert the battery.
@ After aligning the A marks on the battery
and charger, insert the battery by pushing
it in (d)) and down (@).
CB-2LF
2Charge the battery.
¢ CB=2LF: Flip out the plug (_) and plug
the charger into a power outlet (@).
¢ CB=2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
The charging lamp turns orange and
charging begins.
When charging is finished, the lamp turns
green.
3Remove the battery.
@ After unplugging the battery charger,
remove the battery by pushing it in (_))
and up ((2)).
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
o For details on charging time and the number of shots and recording time
possible with a fully charged battery, see Number of Shots/Recording Time,
Playback Time (145).
o Charged batteries gradually lose their charge, even when they are not used.
Charge the battery on (or immediately before) the day of use.
o The charger can be used in areas with 100 - 240 VAC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery. @@
11

Inserttheincludedbatteryandamemorycard(soldseparately).
Notethatbeforeusinganewmemorycard(oramemorycardformatted
inanotherdevice),youshouldformatthememorycardwiththiscamera
(_1113).
Check the card's write=protect
tab.
® Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2 Open the cover.
@ Slide the cover (_) and open it ((_).
Terminals Battery
Lock
3insert the battery.
@ While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
@ If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
inserted.
4 insert the memory card.
@ Insert the memory card facing as shown
until it clicks into the locked position.
@ Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Label
Close the cover.
@ Lower the cover (_) and hold it down as
you slide it, until it clicks into the closed
position (@).
o For guidelines on how many shots or hours of recording can be saved on one
memory card, see "Number of 4:3 Shots per Memory Card" (145).
@Removing the Battery and Memory Card
Remove the battery.
@ Open the cover and press the battery
lock in the direction of the arrow.
The battery will pop up.
@@
12

Remove the memory card.
@ Push the memory card in until it clicks,
and then slowly release it.
The memory card will pop up.
,3 Set the home time zone.
@ Press the <4><_> buttons to choose
your home time zone.
_'_'__'---_-TSett'i_.gthe Date aad Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (_,_41).
_Turn the camera on.
@ Press the power button.
The [Date/Time] screen is displayed.
2Set the date and time.
@ Press the <_><_'> buttons to choose an
option.
@ Press the <A><v> buttons to specify
the date and time.
@ When finished, press the <@> button.
4Finish the setup process.
@ Press the <@> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
@ To turn off the camera, press the power
button.
_!_ _ Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
o To set daylight saving time (1 hour ahead), choose [_{_r] in step 2 and then
choose [_,&,'-]by pressing the <_><v> buttons.
@Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
@Press the <MENU> button.
@@
13

2
2Choose [Date[Time].
@ Move the zoom lever to choose the [_I']
tab.
@ Press the <A><v> buttons to choose
and then press the <@>
[Date/Time],
button.
3Change the date and time.
@ Follow step 2 on _- 13 to adjust the
settings.
@ Press the <MENU>button to close the
menu.
, Date/time settings can be retained for about 3 weeks by the camera's built-in
date/time battery (backup battery) after the battery pack is removed.
, The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
118), even if the camera is left off.
, Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Follow the steps on 13 to set the
date and time.
Disp|ay Language
Change the display language as needed.
S.............................................
.... J
Enter Playback mode.
@Press the <F_> button.
2 Access the setting screen.
@ Press and hold the <@> button, and
then immediately press the <MENU>
button.
3Set the display language.
@ Press the <,A.><v><,_><_> buttons to
choose alanguage, and then press the
<@> button.
Once the display language has been set,
the setting screen is no longer displayed.
o The current time is displayed if you wait too long in step 2 after pressing the
<@> button before you press the <MENU> button. In this case, press the
<@> button to dismiss the time display and repeat step 2.
o You can also change the display language by pressing the <MENU> button
and choosing [Language [_--_-on the [71']tab. @@
14

Followtheseinstructionstoturnthecameraon,shootstillimagesor
movies,andthenviewthem.
Forfullyautomaticselectionoftheoptimalsettingsforspecificscenes,
simplyletthecameradeterminethesubjectandshootingconditions.
q
D
Turn the camera on.
® Press the power button.
The startup screen is displayed.
2Enter [_]_] mode.
® Set the mode switch to [ql_]_)].
® Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
Frames displayed around any detected
subjects indicate that they are in focus.
3Compose the shot.
® To zoom in and enlarge the subject, move
the zoom lever toward <1-_3> (telephoto),
and to zoom away from the subject, move
it toward <[]> (wide angle).
Ih
4Shoot.
Shooting Still Images
@Focus.
® Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
@Shoot.
® Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
® Keep the camera still until the shutter
sound ends.
Your shot is only displayed until the
camera is ready to shoot again.
@@
15

ElapsedTime
Shooting Movies
@Start shooting.
@ Press the movie button. The camera
beeps once as recording begins, and
[QRec] is displayed with the elapsed time.
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
Frames displayed around any detected
faces indicate that they are in focus.
@ Once recording begins, take your finger
off the movie button.
@Finish shooting.
@ Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
After shooting images or movies, you can view them on the screen as
follows.
Enter Playback mode.
@ Press the <r_> button.
Your last shot is displayed.
2 Browse through your images.
@ To view the previous image, press the
<4> button. To view the next image,
press the <_> button.
@ To access Scroll Display mode, press and
hold the <_><),> buttons for at least one
second. In this mode, press the <_><_,>
buttons to browse through images.
@ To return to single-image display, press
the <@> button. @@
16

® Movies are identified by a [_J'_l_.-] icon. To
play movies, go to step 3.
3Play movies.
® Press the <@> button, press the
<A><v> buttons to choose [ b"], and
then press the <@> button again.
Playback now begins, and after the movie
is finished, [_j_] is displayed.
® To adjust the volume, press the <,_><v>
buttons.
° To switch to Shooting mode from Playback mode, press the shutter button
halfway.
2Erase the image.
® Press the <@> button, press the
<A><v> buttons to choose [_], and
then press the <@> button again.
® After [Erase?] is displayed, press the
<4><),> buttons to choose [Erase], and
then press the <@> button.
The current image is now erased.
® To cancel erasure, press the <4><),>
buttons to choose [Cancel], and then
press the <@> button.
o You can also erase all images at once (:: ::79).
@ Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
Choose an image to erase.
® Press the <_><)'> buttons to choose an
image. @@
17

The software and PDF manuals on the included DIGITAL CAMERA Solution
Disk (CD-ROM) (_12) are introduced below, with instructions for
installation, and saving images to a computer.
After installing the software on the CD-ROM, you can do the following
things on your computer.
CameraWi ndow
® Import images and change camera settings
ImageBrowser EX
® Manage images: view, search, and organize
® Print and edit images
@Auto Update Function
Using the software, you can update to the latest version, and download
new functions via the Internet (some software excluded). Be sure to install
the software on a computer with an Internet connection so you can use this
function.
_(_!i) ° Internet access is required to use this function, and any ISP account
charges and access fees must be paid separately.
PDF Manuals
Camera User Guide
® Refer to this guide for a more in-depth understanding of camera
operation.
Software Guide
® Refer to this guide when using the software. The guide can be accessed
from the help system of software (some software excluded).
@@
18

_ _Systern Requirements
The software can be used on the following computers. Adobe Reader is
required to view the PDF manuals.
Windows Macintosh
Windows 8 Mac OS X 10.6
Windows 7 SP1 Mac OS X 10.7
Windows Vista SP2 Mac OS X 10.8*2
Windows XP SP3
Mac OS X 10.7- 10.8: Core 2
Duo or higher,
Mac OS X 10.6: Core Duo
1.83 GHz or higher
Still images
GHz or higher,
Movies
Core 2 Duo 1.66 GHz or higher
Still images
Windows 8 (64 bit), Windows 7
MacOSX 10.7- 10.8:2 GB
or more,
Mac OS X 10.6:1 GB or more
_ fa USB and Wi-Fi
MB or more .3
1024 x 768 resolution or higher
MB or more .3
"1Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X
10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later.
*2 Information on computer models compatible with Mac OS X 10.8 is available on the
Apple website.
*3Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET
Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some
time, depending on computer performance.
Check the Canon website for the latest system requirements, including
supported OS versions.
WJ,
(|nstal|in_ the Software
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest
version and download new functions via the Internet (some software
excluded), so be sure to install the software on a computer with an Internet
connection.
What you will need:
® Computer
® Interface cable (i._[_[12)
® Included CD-ROM (DIGITAL CAMERA Solution Disk) (_[:2)
Insert the CD-ROM in the
computer's CD-ROM drive.
® Insert the included CD-ROM (DIGITAL
CAMERA Solution Disk) (._._2) in the
computer's CD-ROM drive.
® On a Macintosh computer, after inserting
the disc, double-click the desktop disc
icon to open it, and then double-click the
[<_._._]icon displayed. @@
19

......
2Begin the installation.
® Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
GWhen a message is displayed
prompting you to connect
the camera, connect it to a
computer.
® With the camera turned off, open the
cover (_). With the smaller plug of the
included interface cable ([_2) in the
orientation shown, insert the plug fully
into the camera terminal (@_).
® Insert the larger plug of the interface
cable in the computer's USB port. For
details about USB connections on the
computer, refer to the computer user
manual.
\ .................................................................
ii¸C iil; •
4 install the files.
@ Turn the camera on, and follow the
on-screen instructions to complete the
installation process.
The software will connect to the Internet
to update to the latest version and
download new functions. Installation may
take some time, depending on computer
performance and the Internet connection.
@ Click [Finish] or [Restart] on the screen
after installation and remove the CD-
ROM when the desktop is displayed.
@ Turn the camera off and disconnect the
cable.
o When not connected to the Internet, there are the following limitations•
The screen in step 3 will not be displayed•
Some functions may not be installed•
o The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible•
o If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM
and follow the on-screen installation instructions for each. Doing so will ensure
that each camera will receive the correct updates and new functions via the
auto update function•
@@
2O