Canon RebelT3i EOS 600D User manual

m
0
Canon
Z"

image Playback
This chapter explains features related to viewing photos
and movies, going into more detail than in Chapter 2
"Basic Shooting and Image Playback." Here you will
find explanations about how to playback and erase
photos and movies with the camera and viewing them
on a TV set.
About images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a computer or whose file name
was changed.

[] Searching for images Quickly
[] DisplayMuJtipleImagesononescreen(Indexdisplay)
Search for images quickly with the index display showing four or nine
images on one screen,
_Playback the image.
®_When you press the <l_q> button, the
last image captured will be displayed.
Switch to the index display.
® Press the <[]._ > button.
_y,,The 4-image index display will
appear. The currently-selected image
will be highlighted in a blue frame.
_ Press the <[].Ok> button again to
switch to the 9-image index display.
_ Pressing the <_> button will switch
the display between 9 images, 4
images and one image displayed.
3Select an image.
®_Press the <,_, > key to move the blue
frame to select an image.
_ Turning the <_> dial will displaythe
next screen or previous image.
_ Press <_-_> and the selected image
will be displayed as a single image.
202

[] Searching for Images Quickly
Jump through Images (Jump display)
With the single image display, you can turn the <_> dial to jump
through the images forward or back according to the jump method that
was set.
Jump method
Playback position
Select [Image jump w/Y'_].
® Under the [_:] tab, select [Image
jump will, then press <8>.
*_ Select the jump method.
® Press the <,;, > key to select the
jump method, then press <8>.
.¢I: Display images one by one
..%:Jump 10 images
.._: Jump 100 images
.._: Display by date
.._: Display by folder
: Display movies only
_: Display stills only
.._: Display by image rating (p.206)
Turn the <_ > dial to select the
rating.
_Browse by jumping.
_ Press the <1_1> button to playback
images.
®On the single-image display, turn the
<_> dial.
_] ® To search images according to the shooting datel Select [Date].
® To search images according to folder, select [Folder].
_If the card contains both [Movies] and [Sti Is], select either one to
display Only movies or sti!ls.
® If no images match the selected [Rating], browsing through the images
with <_> is not possiblel
203

Q,/Q, Magnified View
You can magnify a shot image by 1.5x to 10x on the LCD monitor.
Magnified area position
1Magnify the image.
_ During image playback, press the
<_ > button.
_- The image will be magnified.
_;, If you hold down the <_> button, the
image will be magnified until it
reaches the maximum magnification.
_, Press the <[]._> button to reduce
the magnification. If you hold down
the button, the magnification will be
reduced to the single image display.
2Scroll around the image.
_ Use the < ,;, > key to scroll around the
magnified image.
® To exit the magnified display, press
the <EEl> button and the single image
display will return.
[] _ You can turn the _> dial to view another image while the
magnification is maintained.
#_ The image cannot be magnified during the image [eview immediately
afte[ sho0ting.
A m0vie Cannot be magnified .
2O4

Rotating the image
You can rotate the displayed image to the desired orientation.
_Select [Rotate].
® Under the [_'] tab, select [Rotate],
then press <_-_>.
2Select an image.
® Press the <41_> key to select the
image to be rotated.
¢ You can also select an image on the
index display (p.202).
_:_j Rotate the image.
_ Each time you press <8>, the
image will rotate clockwise as follows:
90° -_ 270° -_ 0o
® To rotate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <MENU> button.
vertica!shots,youneed not rotate the image as described above. :
_' !fthe rotated image is notdisplayed in the retatedorientation during
image playbaok_set [_: Auto rotate] to[on I_1_:]:
_ A moviecannot be rotated.
205

Setting Ratings
You can rate images and movies with one of five rating marks: I-*]/I-**]/
[**.7/[**:]/[***:].
,_ Select [Rating].
® Under the [_:] tab, select [Rating],
then press <8>.
_i_ Select an image or movie.
® Press the <41_> key to select an
image or movie to be rated.
® You can display three images by
pressing the <[]._> button. To
return to the single-image display,
press the <_> button.
Rate the image or movie.
® Press the <AT> key to select a
rating.
_y,,The total number of images and
movies rated will be counted for each
rating.
® To rate another image or movie,
repeat steps 2 and 3.
® To exit and return to the menu, press
the <MENU> button.
206

Setting Ratings
The total number of a rating can be displayed up to 999. If there are 1.000 or
more images for a rating, [###] will be displayed.
Taking advantage of ratings
With [_= Image jump w/_], you can display only the rated images and
q3ovles.
"With [_: Slide show], you can playback only the rated images and
movies.
With Digital Photo Professional (provided software, p.302), you can
select only the rated images and movies.
With Windows Vista and Windows 7, you can see the rating with the file
information display or the provided image viewer.
2O7

[] Quick Control During Playback
During playback, you can press the <[]> button to set any of the
following: [on Protect images], [@ Rotate], [_ Rating], [(_ Creative
filters], [B Resize (JPEG images only)], and [.._ Image jump w/_].
For movies, only the functions in bold above can be set.
IPress the <[] >button.
® During image playback, press the
<[] > button.
_y,,The functions settable with Quick
Control will appear on the left of the
screen.
_'_,,_Select a function and set it.
® Press the <AT> key to select a
function.
_y,,The name and current setting of the
selected function are displayed at the
bottom.
® Set it by pressing the <4_> key.
® For Creative filters and Resize, press
<_-_> and set the function. For
details, see page 230 for Creative
filters and page 233 for Resize. To
cancel, press the <MENU> button.
,_./JJExit the setting.
® Press the <[] > button to turn off the
Quick Control icons and function
settings.
To rotate an imagel Set[v: Auto rotate] to ion it_ _1], if [_ Auto rotate] is
set to [on r_l] or [off], the [[_Z Rotate] setting wi!l be recorded to the image,
but the Camera will not rotate the image for display.
2O8

[] Quick Control During Playback
® Pressing the <[]> button during the index display Will Switch to the
single-image display and the Quick Control icons wi!l appea r. pressing
the < [] > button again Will return to the index display.
® For mages taken with another camera, se ectab e funct ons may be
limited.
209

',_, Enjoying Movies
Basically, you can playback movies in the following three ways:
Playbaokon a TV set (p.218,221)
Use the provided AV cable or an HDMI
Cable HTC-100 (sold separately)to
connect the camera to a TV set. Then
you can playback the captured movies
and still photos on the TV.
If you have a High-Definition TV set and
connect your camera with an HDMI
cable, you can watch Full High-Definition
(Full HD: 1920x1080)and High-
Definition (HD: 1280x720) movies with
higher image quality.
® Movies0ha card can be played only by devicescompatibleWithMOV
files.
® Snce hard dsk recorders do not have an HDM Nterm na i the camera
cannot be connected to a hard disk recorder with an HDMI cable.
_ Evenif thecamera is connected to a harddisk recorderwith a USB
cab!el movies and still photos cannot beplayed nor saved.
Playback on the Camera,s LCD Monitor (p.212-217)
You can playback movies on the
camera's LCD monitor. You can also edit
out the movie's first and last scenes, and
playback the images and movies in the
card in an automatic slide show.
A movie edited with a personal computer cannot be rewritten to the card and
played back with the Camera, However, video snapshot albums edited with
ZoomBrowse r EX/!mageBrowser (provided s°ftware) Can be played onthe
camera.
210

_,_,Enjoying Movies
Playback and Editing witha Personal Computer
(See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser, p.304)
The movie files recorded in the card can
be transferred to a personal computer
and played or edited with ZoomBrowser
EX/ImageBrowser (provided software,
p.302).
You can also extract a single frame from
a movie and save it as a still photo.
/_ To ha_e the moyie piayback smoothly On a personal computer, use a:
high-pgrformance Persona! €omputer. Regarding the computer hardware
requirements for ZoomBrowser EX/ImageBrQwser, see the PDF file
instruction manual.
® If you want to use commercially-available software to playback 0r edit the
movies, be sure it i_ compatible wit h MOV fi!es, For details On
commercially-available software, inquire the software maker.
211

=,_, Playing Movies
_Playback the image.
® Press the <[_]> button to display
images.
,3
4
Speaker
212
Select a movie.
® Press the <4_> key to select a movie.
® On the single-image display,the
<_ _.n> icondisplayedon the upperleft
indicates a movie.If the movie is avideo
snapshot, <_> will bedisplayed.
® You can press the <INFO.> button to
switch the shooting information
display (p.227).
® On the index display,the perforation on
the left edge of the image indicates a
movie. As movies cannot be played on
the index display, press <_-_> to
switch to the single=image display.
On the single=image display,
press <_>.
_y,,The movie playback panel will appear
on the bottom.
Playback the movie.
® Select [l_] (Play), then press <_-_>.
_+ The movie will start playing.
® You can pause the movie playback by
pressing <_-_>.
® During movie playback, you can turn
the <_> dial to adjust the built-in
speaker's sound volume.
® For more details on the playback
procedure, see the next page.

_,_,Playing Movies
_D Exit Returns to the single-image display.
Play Pressing <8> toggles between play and stop.
I_" Slow motion Adjust the slow motion speed by pressing the <_> key.
The slow-motion speed is indicated on the upper right.
First frame Displays the movie's first frame.
4ll Previous frame Each time you press <8>, a single previous frame is
displayed. If you hold down <_>, it will rewind the movie.
Each time you press <8>, the movie will play frame-by-
ml_ Next frame frame. If you hold down <_>, it will fast forward the
movie.
_'H Last frame Displays the movie's last frame.
_< Edit Displays the editing screen (p.214).
Background Playback a movie with the selected background music
music* (p.217).
Playback position
ram' ss" Playback time (minutes:seconds)
You can adjust the built-in speaker's (p.212) sound volume
,_ttl_lVomume by turning the <_> dia!.
When a background music is set, the movie's sound will not be played.
Bass Boost
This makes low-pitched bass tones easier to hear. This function takes
effect only when playing back sound with the camera's built-in speaker.
_ Set [3: Bass boost] to [Enable].
if the Sound Crackles, YOUShould set
[Bass boost] to [Disable].
Wit h a fu!!Y:oharged Batiery Pack Lp-E8, the continuous playback time
will be appr0_i 2 hr. 30 rain. at 23tc!73°R
® If you took a still photo while you shot the moviel the still photo will be
displayed for approx. !sec. during the movie playback.
213

Editing aMovie's First and Last Scenes
You can edit out the first and last scenes of a movie in 1-sec. increments.
On the movie playback screen,
select [_ ].
b The editing screen wiii be displayed.
Specify the part to be edited out.
_ Select either [_3] (Cut beginning) or
[E!_] (Cut end), then press <_-_>.
®_Press the <4_> key to see the
previous or next frames. Holding it
down wiii fast forward the frames.
®_After deciding which part to edit out,
press <_-_>. The portion highlighted
in blue on the top of the screen is
what wiii remain.
Check the edited movie.
_ Select [_ ] and press <(_ >to playback
the portion highlighted in blue.
® Tochange the editing, go back to step 2.
_ To cancel the editing, select [_] and
press <_-_>.
Save the movie.
® Select [L_], then press <_-_>.
_ The save screen will appear.
_ To save it as a new movie, select
[New file]. To save it and overwrite
the original movie file, select
[Overwrite]. Then press <_)>.
[] ® Since the editing isdone in !:sec, in_rements (positi0n indicated by [_]), the exact
position where the movie is editedmay differ s!igN!y fromthe pos!tionyou specified:
_ If the card does not have enough r0om, [New fi!e] will not be selectab!e I
_ More mov!e editing functions are availabl e with Z0omBrowser EX/
!mageBrowser (provided software; #:302)_
214

Slide Show (Auto Playback)
You can playback the images in the card as an automatic slide show.
Number of images to be played
Select [Slide show].
_ Under the [_:] tab, select [Slide
show], then press <_-_>.
Select the images to be played.
_ Press the <AT> key to select the
desired option, then press <_-_>.
[All imageslMovieslStills]
_ Press the <AT> key to select one of
the following: [@AH images/
=_Movies/aStills]. Then press
<_>,
[Date/Folder/Rating]
_ Press the <AT> key to select one of
the following: [[]Date/mFolder/
Rating].
_ When <E]_ _=-_>is highlighted,
press the <INF0.> button.
_ Press the <AT> key to select the
desired option, then press <_-_>.
_All images
[] Date
mEFolder
D_Movies
I_Stills
"k Rating
All the still photos and movies in the card will be played back.
Still photos and movies taken on the selected shooting date
will be played back.
Stillphotosand moviesin the selectedfolderwill be playedback.
Only the movies in the card will be played back.
Only the still photos in the card will be played back.
Only the still photos and movies with the selected rating will
be played back.
215

Slide Show (Auto Playback)
,3
[Display time]
Set [Set up] as desired.
_ Press the <AT> key to select [Set
up], then press <8>.
_ Set the [Display time] (still photos),
[Repeat], [Transition effect], and
[Background music].
_ The background music selection
procedure is explained on the next
page.
®_After selecting the settings, press the
<MENU> button.
[Repeat]
[Transition effect] [Background music]
216

Slide Show (Auto Playback)
,Start the slide show.
_ Press the <AT> key to select [Start],
then press <_-_>.
_y,,After [Loading image...] is displayed,
the slide show will start.
_uit the slide show.
® Toquit theslide show andreturn tothe
settingscreen,pressthe <MENU> button.
Selecting the Background Music
_ Set [Background music] to [On],
then press <_-_>.
®_Press the <AT> key to select the
desired background music then press
<_-_>. You can also select multiple
background musics.
_ To hear a sample of a background music, press the <INFO.> button.
Press the <AT> key to listen to another background music. To stop
listening to the background music, press the <INFO.> button again.
Adjust the sound volume by turning the <_> dial.
_ After selecting the setting, press the <MENU> button.
To pause the slide show, press <@>. During pause, [||] will be displayed
on the upper left of the image. Press < @> again to resume the slide show.
During auto playback, you can press the <IN}:O.> button to change the
still photo display format (p.71).
During movie playback, you can adjust the sound volume by turning the
<_ > dial.
During pause, you can press the <4D,-> key to view another image.
During the slide show. auto power off _/ill not take effect.
The display time may vary depending on the image.
To view the slide show on a TV set. see pages 218.
Upon purchase, the camera is not set for selecting the background
music. You must first use EOS Utility (provided software) to copy the
background music to the card. For details see the EOS Utility Instruction
Manual in the CD-ROM.
217

Viewing the images on TV
You can view the still photos and movies on a TV set.
Adjust ihe m0vie,s Sound volume with the Tv Sail The sound volume
cannot be adjusted with the Camera .
2, Bef0re €0nnecting or disconne0ting the cable between the camera and
teJevisionl turn off the Camera and TV Set.
_J_Depending on the TV set, part of the image displayed might be cut off,
Viewing onHD (High.Definition) _Sets
HDMI Cable HTC-100 (sold separately) is required.
Connect the HDMI cable to the
camera.
@ With the plug's <AHDMi MiNi> logo
facing the front of the camera, insert it
into the <HDMI OUT> terminal.
Connect the HDMI cable to the TV
set.
@ Connect the HDMIcable to the TV's
HDMI iN port.
_:_j Turn on the TV and switch the
TV's video input to select the
connected port.
_:, Set the camera's power switch to
<ON>.
218

Viewing the Images on TV
£_ Press the <[-;1> button.
S,,The image will appear on the TV
screen (Nothing wiii be displayed on
the camera's LCD monitor).
_ The imageswill automatically be
displayed atthe TV's optimum resolution.
_ By pressing the <INFO.> button, you
can change the display format.
*_ To playback movies, see page 212.
_ Do notconnectany other device's outputto tile camera's <HDMI OUT>
terminal. Doing so may cause a malfunction.
CertainTVs might notbe able to playbackthe captured images. Insuch
a case.use the provided AV cableto connectto the TV.
The camera's < A/V OUT > terminaland <HDMI OUT> terminal cannot
beused atthe same time.
Usi ng HDMI CEC "IV Sets
Ifthe TV set connected to the camera with an HDMI cable is compatible with
HDMI CEC*, you can use the TV set's remote control for playback operations.
* An HDMI-standard function enabling HDMIdevices to control each other so that
you can control themwith one remotecontrol unit.
Set [Ctrl over HDMI] to [Enable].
_ Under the [_:] tab, select [Ctrl over
HDMI], then press <8>.
_ Select [Enable], then press <_-_>.
2Connect the camera to a TV set.
®_Use an HDMI cable to connect the
camera to the TV.
_y,,The TV's input will switch
automatically to the HDMI port
connected to the camera.
219