
Nomenclature
f: AF OperationNi: ISO SpeedNA Live View Shooting k Movie Shooting (Autoexposure)
S AF PointNi Drive/Self-timerN
Basic Zone Modes Creative Zone Modes
D Using the Built-in Flash
d: Program AE
s: Shutter-priority AE
f: Aperture-priority AE
o Press the <D> button to raise the
built-in ash, then shoot.
Basic Zone Modes
If necessary, the built-in ash will be raised and re
automatically in low-light or backlit conditions (with certain
shooting modes).
Creative Zone Modes
Shooting Settings
Viewnder Information
All the settings necessary for
shooting are set automatically.
You just press the shutter
button, and the camera does
the rest.
You can change the camera
settings as desired to shoot in
various ways.
The camera automatically sets the shutter speed and
aperture in the same way as the <A> mode.
oSet the Mode Dial to <d>.
oSet the Mode Dial to <
s>.
oTurn the <6> dial to set the
desired shutter speed, then
focus on the subject.
XThe aperture will be set automatically.
oI
f the aperture display blinks, turn
the <
6
> dial until it stops blinking.
oSet the lens’s focus mode
switch to <AF>.
oPress the <Z
f> button.
oP
ress the <
Y
> <
Z
> keys or turn
the <
6
> dial to select the desired
AF operation, then press <
0
>.
X(One-Shot AF):
For still subjects
9(AI Focus AF):
Switches the AF operation automatically
Z(AI Servo AF):
For moving subjects
oPress the <W
i> button.
oPress the <Y> <Z> keys or turn
the <6> dial to select the ISO
speed, then press <0>.
oWhen [AUTO] is selected, the
ISO speed is set automatically.
When you press the shutter
button halfway, the ISO speed
setting is displayed.
oPress the <A> button to display
the Live View image.
oSet the Mode Dial to <k>.
oPress the shutter button halfway
to focus.
oPress the <A> button to start
shooting a movie.
oTo stop movie shooting, press
the <A> button again.
oPress the shutter button
halfway to focus.
oPress the shutter button
completely to take the picture.
oPress the <S> button.
oPress the <S> cross keys to
select the AF point.
oWhile looking through the
viewnder, you can select the
AF point by turning the <6>
dial until the desired AF point
ashes in red.
oPressing <0> toggles the AF
point selection between the
center AF point and automatic
AF point selection.
oPress the <Yij> button.
oPress the <Y> <Z> keys or turn
the <6> dial to select the drive
mode, then press <0>.
u : Single shooting
i : Continuous shooting
j : Self-timer:10 sec.*
l : Self-timer:2 sec.
q : Self-timer:Continuous*
*
The <
j
> and <
q
> drive
modes can be selected in all
shooting modes (except <
k
>).
oSet the Mode Dial to <f>.
oT
urn the <
6
> dial to set the desired
aperture, then focus on the subject.
XThe shutter speed will be set automatically.
oIf the shutter speed display
blinks, turn the <6> dial until
it stops blinking.
A Scene Intelligent Auto
7 Flash Off
C Creative Auto
2 Portrait
oLive View shooting settings will appear under the [z2]
menu tab in Basic Zone modes and under the [z4] menu
tab in Creative Zone modes.
oNumber of Possible Shots (Live View Shooting)
Temperature No Flash 50% Flash Use
At 23°C / 73°F Approx. 190 shots Approx. 180 shots
3 Landscape
4 Close-up
5 Sports
6 Night Portrait
Recording movie
Microphone
Recording movie
Shooting Operation
Power switch Shutter speed
Shooting mode
Exposure
level indicator
Picture Style
White balance
AF operation
AE lock
Aperture
Flash-ready
Shutter speed
Flash exposure
compensation
Quick Control
icon
Battery check
zxcn
<O/L>
Aperture/
Exposure
compensation
button/
Erase button
<Q>
Quick Control button
<A> Live View shooting/
Movie shooting button
Mode Dial Aperture
AF point activation indicator <•>
ISO speed
Metering mode
Drive/Self-timer
AF points
Max. burst
Monochrome shooting
ISO speed
Exposure level indicator
Focus
conrmation light
Number of
possible shots
Raise built-in ash
Auto Lighting
Optimizer
Image-recording
quality
Flash exposure
compensation
<A>AE lock button
<S>
Cross
keys
Access lamp
<S> AF point
selection button
<D> Flash button
<6> Main Dial
Shutter button
<0> Setting button
COPY
COPY
COPY
COPY
COPY
COPY
COPY
COPY