Canon EOS Rebel 2000 User manual

Canon
EOS
Ке КЕРЕ,
[DATE]
300/300par
__
The image was removed due to copyright restrictions.

THE IMAGE WAS REMOVED DUE
TO COPYRIGHT RESTRICTIONS

Thank you for purchasing a Canon product.
The EOS REBEL 2000/EOS 300 is a very compact autofocus, single-lens
reflex camera. It can be used for a wide variety of subjects and situations.
with fully automatic and user-controlled picture-taking modes.
Read this Instructions booklet and familiarize yourself with your new
camera before taking pictures.
lSymbols
ө The Caution symbol alerts you to actions to prevent picture-taking
problems.
Fi The Note symbol gives additional information for basic camera
operation.
Бод The Lightbulb symbol offers helpful tips for operating your camera
"W^ and taking pictures.
Page numbers in parentheses indicate where you can find more relevant
information.
Also read "Handling Precautions" on page 6 to prevent camera malfunction
and damage.
In this Instructions booklet, the EF 28-80mm f/3.5-5.6 II lens is shown in
illustrations for explanatory purposes.
Keep this Instructions booklet handy for easy reference.
Precautions
* Before using the camera for an important event, be sure to take test
shots to make sure the camera operates properly.
EOS cameras have a lens mount for dedicated operation
(autofocusing, exposure control, etc.) with EF lenses. Using a non-EF
lens with an EOS camera may not result in proper camera or lens
operation.
Note that the warranty does not cover any camera malfunction or
damage occurring with the use of non-Canon accessories.

Contents ==ss EE
Handling Precautions,
Quick Start Guide ...
Nomenclature
Before You Start...
Attaching the Strap
Installing the Batteries and Checking the Battery Level
Mounting and Detaching a Lens.
How the Shutter Button Works
Loading and Unloading Film
Qs Midroll Film Rewind.
Holding the Camera.
2 Camera-Controlled Automatic Shooting ..
© Full Auto Mode ........
Automatic Flash Firing of the Built-in Flash.
AF-Assist with the Built-in Flash..
Single-frame and Continuous Shooting.
© Using Red-eye Reduction .....
Portrait Mode...
Landscape Mode
Close-up Mode...
Sports Mode...
Night Scene Mode...
© Self-timer Operation =
Using the Eyepiece Cover.
Imprinting the Date or Time (QD Model only)
Setting the Date and Time.
Replacing the Quartz Date Васко Battery
ряау»
ontrolled Shooting
Focusing Point Selectio
Focusing Subjects not Covered by the Focusing Points
When Autofocus Fails (Switching to Manual Focus) ..
Metering Mode: m
P Program АЕ.
The Difference Between P апа С)
About Program Shif

Contents
TV Shutter-Speed Priority AE
Ду Aperture-Priority АЕ .
Depth-of-field Preview .
M Manual Exposure
АФЕР Automatic Depth-of-Field АЕ...
X Partial Metering Using AE Lock..
Exposure Compensation . В
"à Ашо Exposure Bracketing (AEB)
m) Silencing the Beeper Мин
Bulb Exposures.
(е Multiple Exposures
150 Setting the ISO Film Speed.
Using the Remote Switch (Sold separately)
Using the Built-in Flash.
Using the Built-in Flash
Basic Photography Terms
Feature Availability Table
AF Modes and Film Advance Modes.
Exposure Warnings ....
Troubleshooting Guide
Major Accessories (Sold separately)
Specifications.
Index
Reference

Handling Precautions ШЕННЕ
Camera Care
(1) This camera is not waterproof and cannot be used in rain or under
water. If the camera gets really wet, promptly consult your nearest
Canon Service Center. If there are any water droplets on the camera,
wipe off with a dry cloth. If the camera has been exposed to salt air,
wipe with a clean, well-wrung, damp cloth.
(2) Do not leave the camera in places prone to excessive heat such as ina
car on a sunny day. Excessive heat can cause the camera to
malfunction.
(3) Use only a blower brush to remove any dust on the lens or in the film
compartment. Do not use a cleaner containing organic solvent to clean
the camera body or lens. For stubborn dirt, consult your nearest Canon
Service Center.
(4) When you will not be using the camera for an extended period, remove
the batteries. Store the camera in a well-ventilated, cool, dry place.
Release the shutter a few times occasionally to make sure the camera
still works.
(5) Avoid storing the camera in a laboratory, cabinet, etc., where corrosive
chemicals are present.
(6) Before using the camera after an extended period of disuse, check that
all the camera controls function properly or take it to the nearest Canon
Service Center for inspection. Do this especially before shooting an
important event or going on a trip.
LCD Panel
In time, the camera's LCD panel display may fade and become difficult to
read. If this happens, have it replaced (at cost) by a Canon Service Center.
At low temperatures, the LCD panel's display response may become
slower. And at 60°С or higher temperatures, the display may blacken. In
either case, the display will return to normal at room temperature.

Handling Precautions
Lithium Batteries
(1) The camera operates on two CR2 lithium batteries. Check the battery
level in the following cases:
* After replacing the batteries.
* After not using the camera for an extended period.
* The shutter stops working.
* The camera is being used in a low-temperature environment.
* You will be shooting an important event.
Before installing the batteries, wipe the battery contacts to remove any
fingerprints and smudges. This is to prevent faulty connections and
corrosion.
Although the batteries work well even at low temperatures, battery
performance may decline slightly at freezing temperatures. In such a
case, keep spare batteries warm in a pocket, etc., and use and warm
the batteries alternately.
(2
в
How Low Battery Levels Affect Camera Operation
Even when 27: blinks on the LCD panel, a proper exposure will be
obtained as long as the shutter releases. However, since the battery level
is low, film advance and auto rewind may not work. Replace the batteries
with new ones.
Lens
After detaching the lens from the camera,
put on the lens caps or put down the lens
with the rear end up to avoid scratching
the lens surface and electrical contacts.
electrical contacts

Quick Start Guide
Install the batteries.
Insert two CR? lithium batteries
as shown by the battery
orientation diagram on the
battery chamber cover. See
page 16,
ха
e (Em
T
©
тапзавваво Ру
575557
рооосоооооооооооо |
Ow) Lig
Load the film.
Align the edge of the film leader
with the orange mark on the
camera and close the camera
back until it snaps shut. See
page 20.
* The film will then advance to
the first frame automatically.
Attach a lens.
Align the red dots on the lens
"| and camera and turn the lens
clockwise unti it snaps in place.
See page 18.
THE IMAGE WAS REMOVED DUE.
TO COPYRIGHT RESTRICTIONS.
Focus the subject.
Aim the AF frame on the
subject and press the shutter
button halfway to autofocus.
See page 24.
* Under low-light or backlit
conditions, the built-in flash
will fire automatically. See
page 60.

Quick Start Guide
jui
gUUUUUUUUG
n
0000000000
On the lens, set ће Turn the Command
3 focus mode switch to 4 Dial to <O> (Full Auto).
AF. See page 24.
See page 18.
Press the shutter button At the end of the roll, the film
completely to take the picture. rewinds automatically. Open
the camera back and remove.
the film cartridge. See page 21.
7 Take the picture. Unloading the film.
See page 19.

Nomenclature Es
«90 Selt-timer button (page 33) Built-in flash (page 60)
AF-assist light (page 26)
Function button (pages 27, 53, 54, 56) Hot shoe (pages 59, 68)
• For attaching EOS-dedicated
Speediites and other accessories
<
>
Focusing
point
selector
(sold
separately)
(page 38)
LCD panel (page 12) 45 > Flash button (page 60)
Red-eye reduction lamp Film plane mark
(page 27)
Sell-timer operation display
(page 33)
Command Dial (page 14)
(£7) Main Dial Strap eyelet
(page 15)
A
‘Shutter button D
(page 19) KS
Grip
(battery chamber)
(page 16) Camera back
lock-release
lever (page 20)
<Qs+> Midroll film rewind button
(page 21)
Lens release button (page 18)
Depth-of-field preview button
(page 47)
Focus mode switch (page 18)
Focusing ring (page 40) Zoom ring
10