Canon PowerShot A620 User User manual

Canon ~lll~llllllllllllllllllllllllill
'7?,werShot A 620
'7?,werShot A 610
DIGITAL CAMERA
[~p-re-p-ar-at-io-n---'---'
[ Shooting
Playback/Erasing
·
ting
Downloadinglrriages
tc ~,~ ~.~!?,,~o~ .. ~.!.~.~.
Basic
Camera User Guide
Please Read This First
This guide explains how to prepare the camera and use its basic features.
1>iG!C II t( ~ II ..... ~ l"j 43
PictBridge DIREO BUBBLE JET Exit Ptlnt DPOF •
PRINT D1REa

Flowchart and Reference Guides
The following guides are available. Refer to them as necessary
according
to the flowchart below. D
SystemMap
Preparations
•Installing the batteries and memory card
•Opening the LCD monitor
•Setting the date, time and language
T
Shooting
Playback/Erasing
Basic Camera User
Guide (This Guide)
•Read this first.
Menus and Settings
Handling precautions, references to
the various shooting and playback
functions
rn
Advanced Camera
User Guide
rn Software Starter Guide
Direct Print User Guide
Basic Camera User
Guide (This Guide)
Zoom Browser EXl
Image Browser
Software User Guide
•PDF manuals available
on the Canon website.
http://web.canon.jpJ
1maging/information-
e.html
~ .. '.j' .. ' •...
LL::J
• Installing the software
• Downloading images to a
computer
• Using the software
( .... p_r_in_t_in_g ....,I)mn~j~. rn
rn
In this guide, the Basic Camera User Guide is called the Basic Guide,
and the Advanced Camera User Guide
is called the Advanced Guide.

-
iW '" " ~m '"'
~" Preparations
I
1. Installing the batteries.
1. Slide the battery cover lock in the direction of the arrow and
open the cover.
2. Insert the supplied 4AA-size alkaline batteries, or
separately sold AA-size NiMH batteries.
_~ Positive end (+)
Negative end (-)~L ..
3. Close the battery cover.
m See the Advanced Guide: Battery Handling (p. 105)
2. Inserting the Memory Card.
1. Slide the memory card slot cover in the direction of the
arrow and open it.
2. Insert the memory card until it clicks into place.
3. Close the memory card slot cover.
m See the Advanced Guide: Handling the Memory Card (p. 107)
m See the Advanced Guide: Formatting Memory Cards (p. 21) I
------1

• To Remove the Memory Card
Use afinger to push the memory card in until you hear aclick, then
release it.
You can use SD* memory cards and MultiMediaCards with this camera.
These cards are collectively called memory cards in this guide.
* SD stands for Secure Digital, acopyright protection system.
211--------

First Time Settings
• Opening the LCD Monitor
The LCD monitor can be used to check an image during shooting, to
play back recorded images or to adjust menu settings. It can be
opened to the following range of positions.
..
1. Opened right to left 180 degrees.
I
2. Tilted forward 180 degrees toward
the lens
or backward 90 degrees.
When tilted forward 180 degrees
toward the lens, the image shown on
the LCD monitor is automatically
flipped and reversed so that it appears
correctly from in front of the lens.
*This reverse display function can be turned off.
m See the Advanced Guide: Rec. Menu (p. 24)
3. Close the LCD monitor with the
LCD
monitor facing out.
When the LCD monitor clicks into
place against the camera body, the
image will return to its original, non-
reversed orientation.
mSee the Advanced Guide: Using the LCD Monitor (p. 15)
When not using the camera, close the LCD monitor with
the monitor facing in to protect it. The LCD monitor will
automatically turn off when it clicks shut against the
camera body.
------13

• Setting the Date/Time
1. Press the power button (CD).
2. Use the • or .. button to select an item and the .. or +
button to change its value (®).
3. Confirm that the correct time is displayed and press the
FUNC./SET button (@).
The date and time can also be set in the Set up menu (p. 13).
• A rechargeable lithium battery
is built into the camera
to save such settings as the date/time. This battery
charges when the main batteries are
in the camera.
When you purchase the camera, place the main
batteries
in it for approximately four hours or use AC
Adapter Kit ACK600 (sold separately) to charge the
lithium battery. It will charge even if the camera
is
turned off.
•The date/time settings may
be lost after approximately
three weeks if you remove the main batteries. Reset
the date/time settings if this occurs.
• Setting the Display Language
1. Set the mode switch to lB (playback).
2. Hold down the FUNC./SET button and press the MENU
button.
3. Use the .. ,+, • or .. button to select alanguage and
press the FUNC.lSET button.
The display language can also be set in the Set up menu (p. 13).
41------

I
Power button
1. Press the power button.
The start-up sound will play and the start-up
image will display
in the LCD monitor.
•Pressing the power button again turns the
power off.
•To switch to the setting that mutes all
sounds (except for the warning sound), press and hold the
MENU button while pressing the power button.
m See the Advanced Guide: Power Saving Function (p. 20)
m See the Advanced Guide: Set up Menu (p. 25)
m See the Advanced Guide: My Camera Menu (p. 27)
2.Set the mode switch to CI (shooting).
3. Set the shooting mode dial to fD)
(Auto).
4.Aim the camera at the subject.
5. Focus and shoot.
1. Press the shutter button halfway to
focus.
When the camera focuses, the camera
beeps twice and the indicator lights green.
2. Press the shutter button fully to shoot.
The shutter sound will play and the image
will record. The indicator will blink green
while the image is recorded to the memory
card.
~See Basic Shooting Functions (p. 6).
m See the Advanced Guide: Indicators (p. 20)
II See the Advanced Guide for the various shooting methods
II available.
---------115

Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for
approximately 2seconds.
You can continue to display images regardless
of the review duration
setting with
the following procedures.
•Keeping
the shutter button pressed after ashot.
•Pressing
the FUNC.lSET button while the image is displayed in the
LCD monitor.
To stop displaying the image, press the shutter button halfway.
~See the Advanced Guide: Review (p. 24)
Basic Shooting Functions
• Selecting a Shooting Mode
1. Set the shooting mode dial to the desired mode (CD).
In the SeN and -" modes,use the. or .. button (®) to select
ashooting mode.
G) Creative zone
Image zone
• Shooting Modes
~ Night scene
Allows you to capture human subjects against the backdrop of'
an evening sky or night scene. The flash is directed at the
person and the shutter speed is slow, so both the person and
I
the background can be beautifully shot.
'6------

-
seN (Special Scene)
By simply selecting one of the following shooting modes, you can shoot with the
most appropriate settings for the scene.
r-------------~
I
------17

-
-" Shoots amovie when you press the shutter button.
You can select from four modes: [Standard], [Fast Frame Rate] suitable for
sports or fast motion, [Compact] convenient for email attachments and [My
Colors] which allows you to change color effects.
m See the Advanced Guide (p. 37)
You can freely select camera settings such as the exposure and
aperture value to suit your shooting purposes.
m See the Advanced Guide (p. 41 - 44, 69)
•To shoot underwater, install the camera in Waterproof
Case WP-DC90 (sold separately).
•We recommend you use Waterproof Case WP-DC90
(sold separately) for shooting at ski resorts or beaches.
• Using the Zoom
1. Press the zoom lever toward IIH] or [.J.
The zoom can be adjusted from 35 mm -140 mm (focal length)
in 35mm film equivalent terms.
IIHl Wide Angle: Zooms
out from the subject.
[.J Telephoto: Zooms in
on the subject.
81-----