Canon POWERSHOT A75 User manual

Camera User Guide
zPlease read the Read This First section (p. 7).
zPlease also see the Software Starter Guide and the Direct Print User Guide.
CDI-E123-010 © 2004 CANON INC. PRINTED IN MALAYSIA
DIGITAL CAMERA Camera User Guide
ENGLISH
Downloaded From camera-usermanual.com Canon Manuals

Flowchart and Reference Guides
This Guide
Shooting with the Camera
Software Starter Guide
Installing the Software
This Guide
This Guide
Connecting the Camera to a Computer
Software Starter Guide
Direct Print User Guide
Printer User Guide
Using the Printer and Printing
Downloading Images to a Computer
Downloaded From camera-usermanual.com Canon Manuals

1
Use of genuine Canon accessories is
recommended.
This product is designed to perform optimally
when used with genuine Canon accessories.
Canon shall not be liable for any damage to this
product and/or accidents such as fire, etc.,
caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of
a battery pack). Please note that this warranty
does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories,
although you may request such repairs on a
chargeable basis.
Downloaded From camera-usermanual.com Canon Manuals

2
Camera Body Temperature
If your camera is used for prolonged periods, the
camera body may become warm. Please be aware
of this and take care when operating the camera
for an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-
precision manufacturing techniques. More than
99.99% of the pixels operate to specification. Less
than 0.01% of the pixels may occasionally misfire
or appear as red or black dots.
This has no effect on the recorded image and does
not constitute a malfunction.
Video Format
Please set the camera's video signal format to the
one used in your region before using it with a TV
monitor (p. 113).
Language Setting
Please see page 24 to change the language
setting.
Please read through the Read This First section
(p. 7) before using your camera.
Disclaimer
While every effort has been made to ensure
that the information contained in this guide is
accurate and complete, no liability can be
accepted for any errors or omissions. Canon
reserves the right to change the specifications
of the hardware and software described herein
at any time without prior notice.
No part of this guide may be reproduced,
transmitted, transcribed, stored in a retrieval
system, or translated into any language in any
form, by any means, without the prior written
permission of Canon.
Canon makes no warranties for damages
resulting from corrupted or lost data due to a
mistaken operation or malfunction of the
camera, the software, the CompactFlashTM
cards (CF cards), personal computers,
peripheral devices, or use of non-Canon CF
cards.
Downloaded From camera-usermanual.com Canon Manuals

3
Trademark Acknowledgments
• Canon and PowerShot are trademarks of Canon,
Inc.
• CompactFlash is a trademark of SanDisk
Corporation.
• iBook and iMac are trademarks of Apple
Computer, Inc.
• Macintosh, PowerBook, Power Macintosh and
QuickTime are trademarks of Apple Computer,
Inc, registered in the United States and other
countries.
• Microsoft, Windows, and Windows NT are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
• Other names and products not mentioned above
may be registered trademarks or trademarks of
their respective companies.
Copyright © 2004 Canon Inc. All rights reserved.
Downloaded From camera-usermanual.com Canon Manuals

4
Table of Contents
Functions and operations tables. These pages
are shaded on the right edges to make them easy
to find.
Read This First 7
Please Read...........................................................7
Safety Precautions .................................................8
Preventing Malfunctions .......................................13
Components Guide 14
Preparing the Camera 17
Installing the Batteries ..........................................17
Installing a CF Card..............................................20
Setting the Date/Time...........................................22
Setting the Language ...........................................24
Basic Functions 25
Turning the Power On/Off.....................................25
Switching between Shooting and Playback..........26
Using the LCD Monitor .........................................28
Shooting – The Basics 33
Auto Mode ...................................................33
Reviewing an Image Right after Shooting ............36
Using the Mode Dial (Image Zone).......................38
Portrait ............................................................... 38
Landscape ........................................................38
Night Scene ....................................................... 38
Fast Shutter .......................................................38
Slow Shutter ......................................................38
Changing the Resolution and Compression......... 40
Using the Flash................................................ 42
Macro Mode ................................................... 44
Self-timer.............................................................. 45
Digital Zoom ......................................................... 46
Continuous Shooting............................................ 47
Shooting Panoramic Images (Stitch Assist) ..... 48
Special Scene Mode..................................... 51
Postcard Print Mode ...................................... 53
Movie Mode ................................................... 55
Playback – The Basics 57
Displaying Images Individually
(Single Image Playback) ...................................... 57
Magnifying Images......................................... 58
Viewing Images in Sets of Nine (Index Playback) .58
Jumping Between Images .................................... 59
Viewing/Editing Movies ........................................ 60
Erasing 63
Erasing Images Individually.................................. 63
Erasing All Images ............................................... 63
Shooting – Advanced Functions 64
Selecting Menus and Settings.............................. 64
Downloaded From camera-usermanual.com Canon Manuals

5
Menu Settings and Default Settings .....................67
Resetting the Settings to Default..........................73
Using the Mode Dial (Creative Zone) ...................74
PProgram AE......................................................75
Tv Setting the Shutter Speed ................................ 75
Av Setting the Aperture .........................................76
M Manually Setting the Shutter Speed and Aperture ...77
Switching between Autofocus Modes...................78
Switching between Light Metering Modes............79
Adjusting the Exposure.........................................80
Adjusting the Tone (White Balance).....................81
Changing the ISO Speed......................................84
Changing the Photo Effect....................................85
Adjusting the Flash Output ...................................86
Shooting Problem Subjects for the Autofocus......87
Setting the Auto Rotate Function..........................89
Playback – Advanced Features 91
Rotating Images in the Display.............................91
Attaching Sound Memos to Image .......................92
Auto Play ..............................................................93
Protecting Images.................................................94
Various Functions 96
About Printing.......................................................96
DPOF Print Settings .............................................98
Image Transfer Settings (DPOF Transfer Order) .......102
Downloading Images to a Computer.................. 104
Computer System Requirements .......................104
Viewing Images on a TV Set..............................112
Resetting the File Number.................................. 114
Customizing the Camera (My Camera Settings) .... 115
Registering My Camera Settings........................116
List of Messages 120
Troubleshooting 122
Appendix 128
Using the Power Kits (Sold Separately) ............. 128
Using the Lenses (Sold Separately)................... 131
Camera Care and Maintenance .........................134
Specifications 136
Battery Performance .......................................... 140
CF Cards and Estimated Capacities
(Recordable Images).......................................... 140
Photo Tips and Information 144
Index 146
Functions Available in Each Shooting Mode......151
Downloaded From camera-usermanual.com Canon Manuals

6
Symbols Used
Icons under title bars show the operations mode.
As in the example below, the mode dial should be
set to , , , , , , , , , ,
or .
Using the Flash
This mark denotes issues that may affect
the camera's operation.
This mark denotes additional topics that
complement the basic operating
procedures.
Mode Dial
Downloaded From camera-usermanual.com Canon Manuals

7
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that you shoot several trial images
to confirm that the camera is operating and being operated correctly. Please note that Canon, its
subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from
any malfunction of a camera or accessory, including CompactFlashTM cards, that results in the failure of an
image to be recorded or to be recorded in a format that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should never be used in a
manner that infringes upon or contravenes international or domestic copyright laws and regulations.
Please be advised that in certain cases the copying of images from performances, exhibitions, or
commercial properties by means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
This camera's warranty is only effective in the country of sale. If a problem arises while the camera is in
use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a
Canon Customer Support Help Desk.
For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your
camera.
Downloaded From camera-usermanual.com Canon Manuals

8
Read This First
Safety Precautions
zBefore using the camera, please ensure that you have read and understood the safety precautions
described below. Always ensure that the camera is operated correctly.
zThe safety precautions noted on the following pages are intended to instruct you in the safe and correct
operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and
equipment.
zIn the next few pages, the term “equipment” refers primarily to the camera, batteries, and separately sold
battery and charger kit and compact power adapter.
Downloaded From camera-usermanual.com Canon Manuals

9
Read This First
WARNINGS
zDo not aim the camera directly into the sun or at other intense light sources which could damage
your eyesight.
zDo not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light
produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away
from infants when using the flash.
zStore this equipment out of the reach of children and infants. Accidental damage to the camera or
batteries by a child could result in serious injury. In addition, placement of the strap around a child's neck
could result in asphyxiation.
zDo not attempt to disassemble or alter any part of the equipment that is not expressly described
in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections,
alterations and repairs should be conducted by qualified service personnel authorized by your camera
distributor or a Canon Customer Support Help Desk.
zTo avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it
has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a
result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to
consult your camera distributor or a Canon Customer Support Help Desk.
zStop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so
may result in fire or electrical shock. Immediately turn the camera’s power off, remove the camera
batteries or unplug the power cord from the power outlet. Confirm that smoke or fume emissions have
ceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
Downloaded From camera-usermanual.com Canon Manuals

10
Read This First
zStop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result
in fire or electrical shock. Immediately turn the camera’s power off, remove the camera batteries or
unplug the power cord from the power outlet. Please consult your camera distributor or the closest
Canon Customer Support Help Desk.
zDo not allow the equipment to come into contact with, or become immersed in, water or other
liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior
comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that water
or other foreign substances enter the interior, immediately turn the camera's power off and remove the
camera batteries or unplug the power cord from the power outlet. Continued use of the equipment may
result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer
Support Help Desk.
zDo not use substances containing alcohol, benzene, thinners or other flammable substances to
clean or maintain the equipment. The use of these substances may lead to fire.
zRemove the power cord on a regular periodic basis and wipe away the dust and dirt that collects
on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy
environments, the dust that collects around the plug over long periods of time may become saturated
with humidity and short-circuit, leading to fire.
zDo not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions
may cause an electrical short circuit, which may lead to fire or electrical shock.
zDo not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical
shock. When unplugging the cord, ensure that you hold the solid portion of the plug. Pulling on the
flexible portion of the cord may damage or expose the wire and insulation, creating the potential for fires
or electrical shocks.
zUse of power sources not expressly recommended for this equipment may lead to overheating,
distortion of the equipment, fire, electrical shock or other hazards. Use only the recommended
power accessories.
Downloaded From camera-usermanual.com Canon Manuals

11
Read This First
zDo not place the batteries near a heat source or expose them to direct flame or heat. Neither
should you immerse them in water. Such exposure may damage the batteries and lead to the leakage
of corrosive liquids, fire, electrical shock, explosion or serious injury.
zDo not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury due
to an explosion. Immediately flush with water any area of the body, including the eyes and mouth, skin,
or clothing that comes into contact with the inner contents of a battery.
zAvoid dropping or subjecting the batteries to severe impacts that could damage the casings. It
could lead to leakage and injury.
zDo not short-circuit the battery terminals with metallic objects, such as key holders. It could lead
to overheating, burns and other injuries.
z
Before you discard a battery, cover the terminals with tape or other insulators to prevent direct
contact with other objects.
Contact with the metallic components of other materials in waste containers
may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area .
z
Use only recommended batteries and accessories. Use of batteries not expressly recommended for this
equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.
zIf using AA-size NiMH batteries, use only Canon AA-size NiMH batteries and the charger
recommended for use with these batteries. Use of another charger may cause batteries to overheat
or deform, posing risk of fire or electric shock.
zDisconnect the battery charger or compact power adapter from both the camera and power outlet
after recharging and when the camera is not in use to avoid fires and other hazards.
zThe camera terminal of the battery charger cord and the compact power cord is designed for
exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire
and other hazards.
z
Exercise due caution when screwing on the separately sold wide converter, tele-converter, close-up
lens and conversion lens adapter.
If they loosen, fall off and shatter, the glass shards may cause an injury.
Downloaded From camera-usermanual.com Canon Manuals

12
Read This First
CAUTIONS
zAvoid using, placing or storing the equipment in places subject to strong sunlight or high
temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat
may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High
temperatures may also cause deformation of the casing. Ensure that there is good ventilation when
using the battery charger to charge the battery pack or power the camera.
zDo not store the equipment in humid or dusty areas. Storage in such areas could lead to fire,
electrical shock or other damage.
zBe careful not to bang the camera or subject it to strong impacts or shocks that could lead to
injury or damage the equipment when wearing or holding it by the strap.
zBe careful not to cover the flash with your fingers or clothing when shooting. The flash may be
damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several
pictures in rapid succession. Either action could result in burns.
zDo not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up
could damage the flash.
zEnsure that the battery charger or compact power adapter is plugged into a power outlet of the
specified rating, not over the specified rating. The plug of the battery charger varies according to
region.
zDo not use the battery charger or compact power adapter if the cable or plug is damaged, or if the
plug is not fully inserted into the power outlet.
zDo not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.
zIf your camera is used for prolonged periods, the camera body may become warm. Please take
care when operating the camera for an extended period as your hands may experience a burning
sensation.
Downloaded From camera-usermanual.com Canon Manuals

13
Read This First
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other equipment generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may cause condensation (water
droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an
airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from
the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation.
Continued use may damage the equipment. Remove the CF card and battery or power cord (if connected)
from the camera and wait until the moisture evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the batteries from the camera or battery
charger and store the equipment in a safe place. Storing the camera for extended periods with batteries
installed may cause battery leaks, which can damage the camera.
However, the date, time and other camera settings may reset to default settings if the batteries have been
removed for more than three weeks.
Downloaded From camera-usermanual.com Canon Manuals

14
Zoom Lever
(p. 33, 46, 58, 59)
Shutter Button (p. 34)
Ring Release Button
Speaker
Shooting Mode Dial (p. 38)
ON/OFF Button (p. 25)
Power Indicator (p. 16)
Viewfinder Window (p. 35) AF-assist Beam (p. 36)
Red-eye Reduction Lamp (p. 43)
Self-timer Lamp
Flash (p. 42)
A/V (Audio/Video) Out
Terminal (p. 112)
Lens
Ring
Te r m i n a l
Cover
Microphone DIGITAL Terminal (p. 107)
To connect the camera to a computer or printer, use one of the following cables.
Computer: Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (Sold Separately)
• CP Printers: Interface Cable IFC-400PCU (supplied with the camera) or the Direct Interface Cable DIF-100 (supplied
with the CP-100/CP-10)
• Bubble Jet Printers:
-Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide.
-PictBridge Compliant Printers: Interface Cable IFC-400PCU (supplied with the camera)
•PictBridge Compliant Non-Canon Printers: Interface Cable IFC-400PCU (supplied with the camera)
Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print compatible
printer information.
Components Guide
Downloaded From camera-usermanual.com Canon Manuals

15
Components Guide
The following operations are accessible through one easy press of the (Print/Share) button.
•Printing: See the Direct Print User Guide (separate from this guide)
•
Downloading images (Windows only): See page 104 of this guide and the Software Starter Guide (separate from this guide)
Blue: Ready to print/Ready to transfer images
Blinking Blue: Printing/Transferring
* Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap.
** The LCD monitor is covered with a thin plastic sheet for protection against scratches during shipment. Remove it
before using the camera.
LCD Monitor**
(p. 28)
MENU Button
(p. 65)
Indicators (p. 16)
Viewfinder
Mode Switch
(p. 26)
Strap Mount Attaching the wrist strap*
DC IN
Terminal (p. 131) (Print/Share) Button (p. 109)
CF Card Slot Cover (p. 20)
Omni Selector ( / , (Macro)/ MF / , , )
SET Button
FUNC. (Function)/
(Single Image Erase) Button (p. 63, 64)
Battery Cover Lock (p. 17)
DISP. (Display) Button (p. 28)
Tripod Socket
Downloaded From camera-usermanual.com Canon Manuals

16
Components Guide
Shooting Mode Dial
Use the shooting mode
dial to select a Shooting
mode.
: Auto (p. 33)
The camera
automatically selects
settings.
• Image Zone
The camera automatically selects settings
according to the image composition type.
: Portrait (p. 38) :
Landscape (p. 38)
: Night Scene (p. 38)
: Fast Shutter (p. 38 )
: Slow Shutter (p. 38)
: Stitch Assist (p. 38, 48)
: Special Scene (p. 38, 51) : Movie (p. 55)
• Creative Zone
The user selects exposure, aperture or other
settings to achieve special effects.
: Program AE (p. 75)
: Shutter Speed-priority AE (p. 75)
: Aperture-priority AE (p. 76)
: Manual Exposure (p. 77)
Creative Zone
Image Zone
Auto
Indicators
The indicators light or blink when the ON/OFF
button or the shutter button is pressed.
• Indicator Next to the Viewfinder
(Upper Indicator)
Green: Ready to record/Ready to communicate
(during a computer connection)
Blinking Green: Starting up/Recording to CF card/
Reading CF card/Erasing from CF card/
Transmitting data (during a computer
connection)
Orange: Ready to record (flash on)
Blinking Orange: Ready to record (camera shake
warning)/Flash is charging (when LCD monitor
is on)
• Indicator Next to the Viewfinder
(Lower Indicator)
Yellow: Macro mode/Manual Focus mode/AF Lock
mode
Blinking Yellow: Focusing difficulty (although you
can press the shutter button, try using focus
lock or adjusting the focus manually (p. 89))
• Power Indicator
Green: Power is on
Downloaded From camera-usermanual.com Canon Manuals

17
Preparing the Camera
Installing the Batteries
The camera uses four AA-size alkaline
batteries supplied with the camera. You may
also use separately sold nickel metal hydride
(NiMH) batteries.
1 Be sure that the camera power is
off.
2 Slide the battery
cover lock in the
direction of the
arrow, and open
the cover.
3 Insert the batteries
as shown.
4 Close the battery cover.
When the indicator next to the viewfinder
blinks green, do not turn off the power or
open the battery cover. The camera is
writing, reading, erasing or transmitting an
image to or from the CF card.
zWe recommend the use of the
separately sold AC Adapter Kit ACK600
to power the camera during long usage
sessions (p. 130).
z
The separately sold battery charger kit
lets you use rechargeable NiMH batteries
to power the camera (p. 128
) .
Negative
end (-)
Positive
end (+)
Downloaded From camera-usermanual.com Canon Manuals

18
Preparing the Camera
zFor important information, see Battery
Performance (p. 140).
zFor information about the Battery and
Charger Kit and AA-size rechargeable
NiMH batteries, see the System Map
(separate from this guide).
Proper Battery Handling
zUse AA-size alkaline or Canon AA-size NiMH
batteries (sold separately) only. For information
on AA-size NiMH battery handling, see Using
Rechargeable Batteries (p. 128).
zNever use manganese or lithium batteries, as
these battery types may overheat in the camera.
zSince the performance of alkaline batteries
may differ according to brand, the operating
time of the batteries you purchase may not be
as long as the batteries that came with the
camera.
zCamera operating time may shorten at low
temperatures when alkaline batteries are used.
Also due to their specifications, alkaline batteries
may expire faster than NiMH batteries. If you are
using the camera in cold areas or for a long time,
we recommend using Canon AA-size NiMH
Battery Kit NB4-200 (a four piece set).
z
While it is possible to use AA-size nickel-cadmium
batteries, performance is unreliable and their use
is not recommended.
zNever mix unused and partially used
batteries. Always load four fresh (or fully
recharged) batteries at the same time.
z
Be careful to load the batteries with their
positive (+) and negative (-) ends in the right
direction.
z Never mix batteries of different types or from
different manufacturers. All four batteries
should be identical.
zBefore inserting the batteries, wipe the battery
terminals well with a dry cloth. Oil from one’s skin
or other dirt may cause a considerable reduction
in the number of recordable images or reduced
usage time.
zBattery performance deteriorates at low
temperatures (especially with alkaline batteries).
If you are using the camera in cold areas and
batteries are running down faster than they
should, you may be able to restore performance
by placing batteries in an inner pocket to warm
them up prior to use. But be careful that you don’t
put the batteries into a pocket together with a
metal key chain or other metallic objects, as
these objects may cause batteries to short-circuit.
Downloaded From camera-usermanual.com Canon Manuals