Canon POWERSHOT ELPH 110HS User manual

CaHOH
_o_S_o,i;,'US 125 HS
qELPH 1 10 HS
Camera User Guide
Before use be sure to read this c including the
3recautions.
This guide will familiarize with how to use the camera
correctly.
Keep the guide handy for future reference,

Beforeuse,makesurethefollowingitemsareincludedinthepackage.
Ifanythingismissing,contactyourcameradealer.
Camera Battery Charger CB-2LD/
CB-2LDE
Battery Pack NB=I1L
(with terminal cover)
Interface Cable IFC-400PCU Wrist Strap WS-800
Getting Started DIGITAL CAMERA Solution Warranty
Disk Card
A memory card is not included (p. 2).
J_ PDF Manuals
For information about the included software, refer to the ImageBrowser EX
User Guide, in PDF format (p. 25).
Adobe Reader is required to view the PDF manuals.
The following memory cards (sold separately) can be used, regardless of
capacity.
SD memory cards*
SDHC memory cards*
SDXC memory cards* _"_
Eye-Fi cards
* Conforms to SD specifications. However, not all memory cards have been verified to work
with the camera.

Preliminary Notes and Legal information
About Eye=Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
_iwaycon_i bdoreSan_i_a_ e;_oiycai_isa u_por_e_iono{_e evices........
_Y such as card readers and computers (including the current version of your
operating system).
Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
Images recorded by the camera are intended for personal use. Refrain from
unauthorized recording that infringes on copyright law, and note that even
for personal use, photography may contravene copyright or other legal
rights at some performances or exhibitions, or in some commercial settings.
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
3

_ Lens _) Shutter button
_2_Speaker (_ Power button
Zoom lever _) Mode switch
Shooting: [-_3 (telephoto) /[] (wide _ Microphone
angle) _ Flash
Playback: O, (magnify) /_ (index) _9_Lamp
(_): Important information you should know
: Notes and tips for expert camera use
(p. xx): Pages with related information (in this example, "xx" represents a
page number)
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
"the memory card".
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
...... Indicates that the function is used when shooting or
viewing still images.
Indicates that the function is used when shooting or
viewing movies.
4

Part Names and Conventions in This Guide
(1) Tripod socket
Screen (LCD monitor)
@_Memory card/battery cover
Indicator
[] (Playback) button
DC coupler cable port
_) MENU button
® Strap mount
HDMITM terminal
_ AV OUT (Audio/video output) /DIGITAL
terminal
@ Movie button
@ [] (Exposure compensation) /Up button
@ _,_(Macro) /Left button
_ FUNC./SET button
@ ,_(Flash) /Right button
@ DISR (Display) /Down button
In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
The following camera buttons are represented by icons.
,_ Up button @ on back
,_ Left button @ on back
@ FUNC./SET button 44) on back
_. Right button @ on back
v Down button @ on back
On-screen text is indicated in brackets.
5

Package Contents ............................. 2
Compatible Memory Cards ................ 2
Preliminary Notes and Legal
Information ....................................... 3
Part Names and Conventions in
This Guide ....................................... 4
Contents ............................................ 6
Contents: Basic Operations ............... 8
Safety Precautions ........................... 10
Initial Preparations ........................... 13
Trying the Camera Out .................... 20
Included Software, PDF Manuals ....25
Accessories ..................................... 32
Special Modes for Other
Purposes ....................................... 91
Shooting Various Movies ................ 99
4pmode ........................... 101
Shooting in Program AE Mode
(p Mode) .................................... 102
Image Brightness
(Exposure Compensation) .......... 103
Color and Continuous Shooting .... 106
Shooting Range and Focusing ...... 110
Flash ............................................. 117
Other Settings ............................... 119
'_ Camera Basics ................. 33
On/Off .............................................. 34
Shutter Button .................................. 35
Shooting Modes ............................... 35
Shooting Display Options ................ 36
FUNC. Menu .................................... 37
MENU Menu .................................... 38
Indicator Display .............................. 39
Clock ................................................ 39
2Smart Auto Mode ............. 41
Shooting in Smart Auto Mode .......... 42
Common, Convenient Features ....... 51
Using Face ID .................................. 57
Image Customization Features ........ 67
Helpful Shooting Features ............... 72
Customizing Camera Operation ......75
3 Other Shooting Modes ..... 77
Specific Scenes ............................... 78
Applying Special Effects .................. 82
5Playback Mode ............... 121
Viewing .......................................... 122
Browsing and Filtering Images ...... 126
Editing Face ID Information ........... 129
Image Viewing Options ................. 131
Protecting images ......................... 135
Erasing Images ............................. 139
Rotating Images ............................ 142
Image Categories .......................... 144
Editing Still Images ........................ 148
Editing Movies ............................... 153
_Setting Menu ................... 155
Adjusting Basic Camera
Functions .................................... 156
TAccessories .................... 167
Tips on Using included
Accessories ................................. 168
Optional Accessories .................... 169
Using Optional Accessories .......... 171

PrintingImagos.............................177
UsinganEye-FiCard....................190
_ Appendix ......................... 193
Troubleshooting ............................ 194
Contents
Handling Precautions .................... 197
On-Screen Messages .................... 198
On-Screen Information .................. 200
Functions and Menu Tables .......... 204
Index .............................................. 212

Use camera-determined settings (Auto Mode) ............................. 42
(p. 79)
Applying special effects
Fish-Eye Effect
(p. 82) (p. 82) (p. 83)
Miniature Effect Toy Camera Effect Soft Focus
(p. 84) (p. 85) (p. 86) (p. 87)
Focus on faces ............................................................... 42, 78, 112
Without using the flash (Flash Off) ............................................... 54
With myself in the shot (Self-Timer) ........................................ 52, 94
Add the shooting date and time (Date Stamp). ............................. 55
Use Face ID .......................................................................... 57, 129
Movie clips and photos together (Movie Digest) ........................... 91

Contents: Basic Operations
N
View images (Playback Mode) ................................................... 122
Automatic playback (Slideshow) ................................................. 132
On a TV ...................................................................................... 171
On a computer .............................................................................. 26
Browse through images quickly .................................................. 126
Erase images .............................................................................. 139
Shoot movies .......................................................................... 42, 99
View movies ............................................................................... 122
Fast-moving subjects, slow-motion playback ............................... 99
Print pictures ............................................................................... 177
Save images to a computer .......................................................... 26

/
Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Do not trigger the flash in close proximity to people's eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
Strap: Putting the strap around a child's neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
Stop using the product immediately if it emits smoke, astrange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
Do not let the product come into contact with water (e.g. sea water) or other
liquids.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically, and using adry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in amanner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
10

Safety Precautions
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
CD-ROMs.
It is possibte to suffer hearing {ossfrom listening with headphones to the {oudsounds of
a CD-ROM played on all audio CD player (music player). Additionally, this could damage
the speakers.
When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
This could result in burns or damage to the flash.
Places subject to strong sunlight
Places subject to temperatures above 40 °C(104 °F)
Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
Viewing image; on ihe camera screen forproiong;d periodsmay cause .....................................
discomfort.
Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
dust or sand to enter the camera.
This may cause the product to malfunction.
11

Safety Precautions
in regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
when you are not using it.
Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
5; n;t ;ii downwiihth; _am;rainyourp;ck;tl.....................................................
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12

Prepare for shooting as follows.
SA_ttachi_ng the Strap
Thread the end of the strap through the strap
hole ((_)), and then pull the other end of the
strap through the loop on the threaded end
(_),
l, Ho|ding the Camera
Place the strap around your wrist.
When shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. Do not rest your
fingers on the flash.
13

Initial Preparations
//Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
insert the battery.
After aligning the ,A marks on the battery and
charger, insert the battery by pushing it in
(_')) and down ((g)).
CB-2LDE
Charge the battery.
For CB=2LD: Flip out the plug ((_)) and plug
the charger into a power outlet (@).
For CB=2LDE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
The charging lamp turns orange and
charging begins.
When the charging is finished, the lamp turns
green.
:;: Remove the battery.
After unplugging the battery charger, remove
the battery by pushing it in ((_)) and up (_).
14

Initial Preparations
i_) To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach the charger
or cord to other objects. Doing so could result in malfunction or
damage to the product.
_ie_ifso _argin_i_ea,_i_ _[_6ero_si4oisa_aiecor_iii_giii_e...............................
_jz possible with a fully charged battery, see "Specifications" in the Getting Started
guide.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera (p. 160).
Check the card's write=protect tab.
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
Open the cover.
Slide the cover (1(_) and open it ((_).
i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiililili!iii
Terminals Batter _Lock
.......................................................................................................insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
Batteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
15

Initial Preparations
Terminals
_Removing the Battery
%
:__ .....
insert the memory card.
Insert the memory card facing as shown until
it clicks into the locked position.
Make sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Close the cover.
Lower the cover (_'_) and hold it down as you
slide it, until it clicks into the closed position
(@),
and Memory Card
Remove the battery.
Open the cover and press the battery lock in
the direction of the arrow.
The battery will pop up.
Remove the memory card.
Push the memory card in until it clicks, and
then slowly release it.
The memory card will pop up.
16

Initial Preparations
_,/Setting the Date and Time ii_
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
..... Turn the camera on.
_,_ Press the power button.
_L---_ [Date/Time] screen is displayed.
_._ ,__,ON/O The
Set the date and time.
Press the _ _ buttons to choose an option.
Press the Av buttons to specify the date
and time.
When finished, press the @ button.
Set the local time zone.
Press the _ _ buttons to choose your local
time zone.
Finish the setup process.
Press the @ button when finished. After a
confirmation message, the setting screen is
no longer displayed.
To turn off the camera, press the power
button.
17

Initial Preparations
(_ Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
_i_i__ii_h___i;__i_e ii _o_;_ ___i'il__oos _i_"ii_e _;'__ _ _e_......................
choose "+_by pressing the A'_- buttons.
Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
Press the MENU button.
Choose [Date/Time].
Move the zoom lever to choose the ?T tab.
Press the Av buttons to choose [Date/
Time], and then press the @ button.
Change the date and time.
Follow step 2 on p. 17 to adjust the settings.
Press the MENU button to close the menu.
Date/time settings can be retained for about 3 weeks by the camera's built-indate/time battery (backup battery) after the battery pack is removed.
The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 169),
even if the camera is left off.
Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to set the date and time.
18

Initial Preparations
/Display Language
L
The display language can be changed as needed.
.........................I_i En,erP,aybac,mode.
._.... _;,IJl Pressthe[]button.
Access the setting screen.
i Press and hold the @ button, and then
> ' _i immediately press the MENU button.
Set the display language.
Press the A'_,_), buttons to choose a
language, and then press the @ button.
Once the display language has been set, the
setting screen is no longer displayed.
button before you press the MENU button. Inthis case, press the @ button to
dismiss the clock icon and repeat step 2.
You can also change the display language by pressing the MENU button and
choosing [Languagel}_] on the _'1'tab.
19

_;iiiii!i_!_J_i_i_!_i_i_i_!_iiiiii:ii!ii!ii!iiii_:i_j_iii!iii_i_i_i¸:!!!ii_iiiii_i_ii_!!!_!_i!_i_i_i_i_i_ii_ii_i_i_ii_iJ_!i
Follow these instructions to turn the camera on, shoot still images or movies,
and then view them,
_Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
........................_ i_:_;ii_i!!ii_ii_¸
Turn the camera on.
Press the power button.
The startup screen is displayed.
Enter _ mode.
Set the mode switch to l_).
Aim the camera atthe subject. Asthe camera
determines the scene, it will make a slight
clicking noise.
Icons representing the scene and image
stabilization mode are displayed in the upper
right of the screen.
Frames displayed around any subjects that
are detected indicate that they are in focus.
Compose the shot.
To zoom in and enlarge the subject, move the
zoom lever toward F_] (telephoto), and to
zoom away from the subject, move it toward
[] (wide angle).
20