Canon PowerShot SD750 Digital ELPH User manual

CDI-E272-010 XX07XXX
(_allOll
© 2007 CANON INC. PRINTED IN JAPAN
CI
i-
ra
_--;o
s,-
c£
Ulr
<
3
C
'='l
¢)
c
I,
(_allOll IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
CDI-E272
DIGITAL
_S
DIGITAL ELPH I,,US 75
iBefore Using the Camera N
Playback/Erasing
Print/Transfer Settings
Customizing the Camera
Troubleshooting
List of Messages
Camera User Guide
This guide explains camera features and procedures in detail.
PictBridgeDIRECTBUBBLEJET DPOF
PRIkrf DIRECI"

g
eAutomatically adjusts shooting settings
to match particular conditions (Special
Scene mode)
eAvoid the effects of camera shake or
blurry subjects when shooting by using
High ISO Auto and Auto ISO Shift
eFace Detect AF ideal for photographing
images of people
eAutomatically detects camera
orientation with an Intelligent
Orientation sensor
eChanges image colors to create special
effects (Color Accent, Color Swap)
Printing
eMakes printing easy with the Print/Share button
eAIso supports non-Canon brand PictBridge compliant
printers
_ses of Recorded Images "_
• Effortlesslytransferthemto acomputerwiththe Print/Sharebutton
•Freelycustomizethe start-upimageor start-upsoundusingthe
My Camera settings

Conventions Used in this Guide
Icons appearing below titles indicate the modes in which the
procedure can be used. Mode Switch/I-_l button
I
I I
• Unavailable shooting modes are shown grayed out.
• _ and _ are both indicated by
See Functions Available in Each Shooting Mode (p. 160).
In this guide, the Basic Camera User Guide is referred to as the
Basic Guide, and the Advanced Camera User Guide is referred to
as the Advanced Guide.
0This mark denotes issues that may affect the camera's operation.
This mark denotes additional topics that complement the basic
operating procedures.
You can use SD memory cards, SDHC memory
cards and MultiMediaCards with this camera. These
cards are collectively called memory cards in this
guide.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when
used with genuine Canon accessories. Canon shall not be liable
for any damage to this product and/or accidents such as fire, etc.,
caused by the malfunction of non-genuine Canon accessories
(e.g., a leakage and/or explosion of a battery pack). Please note
that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
1

Table of Contents
Items marked with aIi_ are lists or charts that summarize camera
functions or procedures.
Please Read ...................................... 5
Safety Precautions ................................. 6
Preventing Malfunctions ............................ 11
Using the LCD Monitor ............................. 12
LCD Monitor Brightness ............................ 14
Information Displayed on the LCD Monitor ............. 15
Power Saving Function ............................ 19
Setting the World Clock ............................ 20
Menus and Settings ............................... 22
Menu List ....................................... 24
Resetting Settings to Their Default Values .............. 28
Formatting Memory Cards .......................... 29
2
Changing the Recording Pixels and Compression (Still Images) 30
Using the Digital Zoom/Digital Tele-Converter ........... 32
Magnified Close-Up Shooting (Digital Macro) ........... 34
Red-Eye Reduction Function ........................ 35
Setting the Slow Synchro Function ................... 35
_.1 Continuous Shooting ........................... 36
Postcard Mode ................................... 37
Embedding the Date in the Image Data .............. 37
Setting the Display Overlay ......................... 38
,m Movie Shooting 39
f_ ••••••••••••••••••••••••••••••••
Shooting Panoramic Images (Stitch Assist) ............. 44
Switching between Focusing Modes .................. 46
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock).. 48
Locking the Exposure Setting (AE Lock) ............... 49
Locking the Flash Exposure Setting (FE Lock) .......... 50

Switching between Metering Modes ................... 51
Adjusting the Exposure Compensation ................. 52
Setting the Shutter Speed (Long Shutter Mode) .......... 53
Adjusting the Tone (White Balance) .................... 55
Shooting in a My Colors Mode ........................ 58
Changing Colors .................................. 60
IS0 Adjusting the ISO Speed ......................... 65
_,,_ Changing the ISO Speed with One Touch (Auto ISO Shift) 66
Registering Functions to the _v Button ................ 67
Setting the Auto Rotate Function ....................... 69
Checking for Focus Right After Shooting ............... 70
Creating an Image Destination (Folder) ................ 72
Resetting the File Number ........................... 74
O, Magnifying Images .............................. 76
[] Viewing Images in Sets of Nine (Index Playback) ...... 77
Organizing Images by Category (My Category) .......... 78
Jumping to Images ............................. 79
Viewing Movies ................................... 80
Editing Movies .................................... 82
Rotating Images in the Display ....................... 83
Playback with Transition Effects ...................... 84
Red-Eye Correction Function ........................ 85
Adding Effects with the My Colors Function ............. 88
Attaching Sound Memos to Images ................... 90
Sound-Only Recording (Sound Recorder) ................. 91
Automated Playback (Slide Shows) ................... 93
Protecting Images ................................. 98
Registering Functions to the Playback Button .......... 100
Erasing Images .................................. 102
Setting the DPOF Print Settings ..................... 104
Setting the DPOF Transfer Settings .................. 108
3

Changing My Camera Settings ....................... 110
Registering My Camera Settings ..................... 111
Camera ........................................ 113
When the power is turned on ....................... 113
LCD monitor .................................... 114
Shooting ....................................... 115
Shooting Movies ................................. 119
Playback ....................................... 120
Battery/Battery Charger ........................... 121
TV monitor output ................................ 121
Printing on Direct Print Compatible Printers ............ 122
Battery Handling ................................. 127
Handling the Memory Card ........................ 129
Using an AC Adapter Kit (Sold Separately) ............ 131
Using an Externally Mounted Flash (Sold Separately) .... 132
Camera Care and Maintenance ..................... 134
Specifications ................................... 135
4

Handling Precautions
Test Shots
Before you try to photograph important subjects, we highly
recommend that you shoot several trial images to confirm that the
camera is operating and being operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its
distributors are not liable for any consequential damages arising
from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal
use and should never be used in a manner that infringes upon or
contravenes international or domestic copyright laws and
regulations. Please be advised that in certain cases the copying of
images from performances, exhibitions, or commercial properties
by means of a camera or other device may contravene copyright or
other legal rights even if the image was shot for personal use.
Warranty Limitations
This camera's warranty is only effective in the country of sale. If a
problem arises while the camera is in use abroad, please convey it
back to the country of sale before proceeding with a warranty claim
to a Canon Customer Support Help Desk.
For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
5

Video Format
Please set the camera's video signal format to the one used in your
region before using it with a TV monitor (p. 101).
Language Setting
Please see the Basic Guide (p. 9) to change the language setting.
•Before using the camera, please ensure that you read the safety
precautions described below and in the "Safety Precautions"
section of the Basic Camera User Guide. Always ensure that the
camera is operated correctly.
eThe safety precautions noted on the following pages are intended
to instruct you in the safe and correct operation of the camera and
its accessories to prevent injuries or damage to yourself, other
persons and equipment. Be sure you fully understand them before
reading the rest of the manual.
eEquipment refers to the camera, battery charger or separately
sold compact power adapter.
eBattery refers to the battery pack.
6

• Do not aim the camera directly at the sun or strong light
sources.
• It may damage the photographic sensor (CCD).
•Store this equipment out of the reach of children and infants.
•Wrist strap: Placement of the strap around the child's neck could
result in asphyxiation.
•Memory card: Dangerous if accidentally swallowed. If this
occurs, contact a doctor immediately.
•Do not attempt to disassemble or alter any part of the
equipment that is not expressly described in this guide.
•To avoid the risk of high-voltage electrical shock, do not
touch the flash portion of the camera if it has been damaged.
•Stop operating the equipment immediately if it emits smoke
or noxious fumes.
•Do not allow the equipment to come into contact with, or
become immersed in, water or other liquids. If the exterior
comes into contact with liquids or salt air, wipe it dry with a
soft, absorbent cloth.
Continued use of the equipment may result in fire or electrical
shock. Immediately turn the camera power off and remove the
camera battery or unplug the battery charger or compact power
adapter from the power outlet. Please consult your camera
distributor or the closest Canon Customer Support Help Desk.
•Do not use substances containing alcohol, benzine,
thinners or other flammable substances to clean or
maintain the equipment.
•Do not cut, damage, alter or place heavy items on the power cord.
•Use only recommended power accessories.
•Remove the power cord on a regular periodic basis and
wipe away the dust and dirt that collects on the plug, the
exterior of the power outlet and the surrounding area.
•Do not handle the power cord if your hands are wet.
Continued use of the equipment may result in fire or electrical
shock.
7

• Do not place the battery near a heat source or expose it to
direct flame or heat.
•The battery should not be immersed in water or sea water.
•Do not attempt to disassemble, alter or apply heat to the
battery.
•Avoid dropping or subjecting the battery to severe impacts
that could damage the casing.
•Use only recommended battery and accessories.
Use of battery not expressly recommended for this equipment
may cause explosions or leaks, resulting in fire, injury and
damage to the surroundings. In the event that a battery leaks and
the eyes, mouth, skin or clothing contact these substances,
immediately flush with water and seek medical assistance.
•Disconnect the battery charger and compact power adapter
from both the camera and the power outlet after recharging
or when they are not in use to avoid fire and other hazards.
•Do not place anything, such as tablecloths, carpets,
bedding or cushions, on top of the battery charger while it
is charging.
Leaving the units plugged in for a long period of time may cause
them to overheat and distort, resulting in fire.
•Use only the specified battery charger to charge the battery.
•The battery charger and compact power adapter are
designed for exclusive use with your camera. Do not use it
with other products or batteries.
There is a risk of overheating and distortion which could result in
fire or electrical shock.
•Before you discard a battery, cover the terminals with tape
or other insulators to prevent direct contact with other
objects.
Contact with the metallic components of other materials in waste
containers may lead to fire or explosions.
8

• Do not trigger the flash in close proximity to human or
animal eyes. Exposure to the intense light produced by the
flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from
infants when using the flash.
•Keep objects that are sensitive to magnetic fields (such as
credit cards) away from the speaker of the camera.
Such items may lose data or stop working.
•Be careful not to bang the camera or subject it to strong
impacts or shocks that could lead to injury or damage the
equipment when wearing or holding it by the strap.
•Do not store the equipment in humid or dusty areas.
•Do not allow metal objects (such as pins or keys) or dirt to
contact the charger terminals or plug.
Such conditions could lead to fire, electrical shock or other
damage.
•Avoid using, placing or storing the equipment in places
subject to strong sunlight or high temperatures, such as the
dashboard or trunk (boot) of a car.
•Do not use the equipment in a manner that exceeds the
rated capacity of the electrical outlet or wiring accessories.
Do not use if the power cord or plug are damaged, or if not
fully plugged into the outlet.
•Do not use in locations with poor ventilation.
The above-mentioned can cause leakage, overheating or
explosion, resulting in fire, burns or other injuries. High
temperatures may also cause deformation of the casing.
•When not using the camera for extended periods of time,
remove the battery from the camera or battery charger and
store the equipment in a safe place.
The battery can run down.
9

• Do not connect compact power adapters or battery
chargers to devices such as electrical transformers for
foreign travel because it may lead to malfunctions,
excessive heat generation, fire, electric shock or injury.
•Do not operate the flash with dirt, dust or other items stuck
to the surface of the flash.
•Be careful not to cover the flash with your fingers or
clothing when shooting.
The flash may be damaged and emit smoke or noise. The
resulting heat build-up could damage the flash.
•Do not touch the surface of the flash after taking several
pictures in rapid succession.
Doing so could result in burns.
10

• Never place the camera in close proximity to electric motors
or other equipment generating strong electromagnetic
fields.
Exposure to strong magnetic fields may cause malfunctions or
corrupt image data.
•When moving the equipment rapidly from a cold place to a
hot place, you can avoid condensation by placing the
equipment in an airtight, resealable plastic bag and letting it
adjust to temperature changes slowly before removing it
from the bag.
Moving the equipment rapidly from a cold place to a hot place may
cause condensation (water droplets) to form on its external and
internal surfaces.
•Stop using the camera immediately.
Continued use may damage the equipment. Remove the memory
card and battery or compact power adapter from the camera and
wait until the moisture evaporates completely before resuming
use.
11

BeforeUsingtheCamera--BasicOperations
display mode.
_*,_ :_ :>,,,, i !_ 'M";_';_,;:_,*;_,,_;s_,z,:;'d_,"s_i_,,_ _ ; ;_,,
•The LCD monitor is set to the Information View in the _'_,
_, or mode.
• The LCD monitor will not switch to detailed display in
magnified display (p. 76), or index playback mode (p. 77).
12

Using the Clock
You can display the current date and time
for a 5-second* interval using the following
two methods.
* Default setting
Method 1
Hold the FUNC./SET button down while turning on the power.
Method 2
In a shooting/playback mode, press the FUNC./SET button for more
than one second.
If you hold the camera horizontally, it displays the time. If you hold
it vertically, the time and date display.
However, if you hold the camera vertically and use method 1 to
display the date and time, the time will be initially displayed in the
same way as when the camera is held horizontally.
•You can change the display color by pressing the ÷ or ,_
button.
oThe clock display will disappear when the display interval is over
or when a button is operated for a subsequent operation.
oThe clock's display interval can be changed in the _ (Set up)
menu (p. 27).
oThe clock cannot be displayed when images are magnified
(p. 76) or it is in the index playback mode (p. 77).
5"
m
m,
3
I
m
m
m.
0
"0
mu
0
m
13

LCD Monitor Brightness Settings
The brightness of the LCD monitor can be changed in the following
two ways.
eChanging Settings Using the Set up Menu (p. 26)
eChanging Settings Using the DISP. Button (Quick-bright LCD
Function)
You can set the LCD monitor to the brightest setting regardless of
the option selected in the Set up menu by pressing the DISP.
button for more than one second.*
- To restore the previous brightness setting, press the DISP.
button for more than one second again.
- The next time you turn on the camera, the LCD monitor will be at
the brightness setting selected in the Set up menu.
* You cannot change the brightness of the LCD monitor with this function if
you have already set it to its highest setting in the Set up menu.
Night Display
When shooting in dark conditions, the camera automatically
brightens the LCD monitor to suit the brightness of the subject*,
making it easier to frame the subject.
* Although noise may appear and the movement of the subject shown on the
LCD monitor may appear somewhat jagged, there is no effect on the
recorded image. The brightness of the image displayed in the monitor, and
the brightness of the actual image recorded will be different.
14

Shooting Information (Shooting mode)
[T] Digital Tele-converter/Zoom
Magnification/Safety Zoom (p. 32) Macro/Infinity (Basic Guide p. 16)
] Spot Frame
[] AF Frame (p. 46) ISO Speed (p. 65)
BIDH
Flash (Basic Guide p. 15)
liEImmm
Shooting Method (p. 36, Basic p. 17)
[] [] []Auto Rotate (p. 69)
• Rec. Movie Recording (p. 39)
_'1 Low Battery (p. 127)
AE Lock (p. 49)
FE Lock (p. 50)
AF Lock (p. 48)
Time Zone (p. 20)
Create Folder (p. 72)
*/Shutter speed*/
Aperture Setting*
3:2 Guide (p. 38)
Grid Lines (p. 38)
o Stills: Recordable Shots-
, Movies: Remaining Time/
Elapsed Time
I311 MMWm
E]IAli mEDWml m
Shooting Mode (pp. 34, 39, 44, 60,
62, Basic Guide pp. 12- 14)
B;J... _] ExposureCompensation(p. 52)
n..._Long Shutter Mode (p. 53)
ODO WD
White Balance (p. 55)
mmmmmmmmmm
My Colors(p. 58)
rat rl_ Metering Mode (p. 51)
_'J _1 r'l Compression(Still Images)
(p.30) FrameRate(Movie)(p. 42)
_ Shooting Interval (Movie)
Recording Pixels (pp. 30, 42)
(Red)
Camera Shake Warning (p. 115)
*Displays when then shutter button is pressed halfway. Since the camera
automatically readjusts for the optimal settings when using the flash, settings
displayed in shooting information may differ from the actual settings. 15
me
3
I
m
m.
1)
0
"0

If the indicator blinks orange and the camera shake icon
displays, it indicates there is insufficient illumination and a
slow shutter speed will be selected. Shoot using the following
methods.
- Raise the ISO speed (p. 65).
- Set the Auto ISO Shift to [On] (p. 66).
- Select a setting other than _-] (flash off)
(Basic Guide p. 15).
- Attach the camera to a tripod or other device.
Playback Information (Playback Mode)
Standard
DefinedPlayback(p. 79)
WAVE Format Sound (p. 90)
-- Folder Number-File Number
-- Shooting Date/Time
-- Total number of images
Displayed image number
CProtection Status (p. 98)
tarlrl
Compression(StillImages)(p.30)
BBI lmD= -I
RecordingPixels(StillImages)(p.30)
Movie(p.80)
16

Detailed
f 5]
My Category (p. 78)
Histogram (p. 18)
miEDmmlDm
Shooting Mode (pp. 34, 39, 44, 60,
62, Basic Guide pp. 12 - 14)
_ _ Metering Mode (p. 51)
[_ ..._ISO Speed (p. 65)
Recording Pixels/Frame Rate
(Movies) (p. 42)
Shutterspeed
_Time Lapse (p. 39)
ilm...E
Exposure Compensation (p. 52)
D
Flash (Basic Guide p. 15)
Macro/Infinity (Basic Guide p. 16)
m lnmeem l l lm
My Colors (Shooting) (p. 58),
_ Color Accent/Color Swap (p. 60)
My Colors (Playback) (p. 88)
Di_]Image with Red-Eye Correction
(p. 85)/My Colors effect (p. 88)
White Balance (p. 55)
File Size
Red-EyeCorrection (Playback) (p. 85)
Recording Pixels (Still Images) (p. 30)
Aperture Setting Movie Length (Movies) (p. 39)
The following information may also be displayed with some images.
A sound file in a format other than the WAVE format is attached or the
_1_ file format is not recognized.
JPEG image not conforming to Design rule for Camera File System
_, Standards
RAW image
I[_ Unrecognized data type
Information for images shot on other cameras may not display
correctly.
5"
m
m=
CQ
(D
(3
3
I
O3
m
m,
O
mu
0
m
17

Histogram Function
The histogram is a graph that allows you to check the brightness
of the image. The greater the bias toward the left in the graph, the
darker the image.
The greater the bias toward the right, the brighter the image. If the
image is too dark, adjust the exposure compensation to a positive
value. Similarly, adjust the exposure compensation to a negative
value if the image is too bright (p. 52).
Sample Histograms
Dark Image Balanced Image Bright Image
18