Cansonic ultradash S1 User manual

Instruction Manual

The following instructions have been developed for optimized use of your
Cansonic UltraDash S1 camera. Each of the default settings have been put
forth for having the highest quality video while maintaining the peace of mind
when the camera is on. It is not recommended you adjust the default settings.
EASY TO USE:
With new technology at everyone’s hand, the creators of Cansonic have
developed an easy to use camera for everyday use. The Cansonic UltraDash
S1 allows its user to record files in three minute lengths. These files are easy
to download on to your home desktop or personal laptop. In most instances, the
video files are easy to be played on your mobile device. While most cameras
traditionally use the entire capacity of the MicroSD card until it is removed,
CANSONIC automatically deletes the oldest file to create space for the new
video. You will be able to adjust the settings accordingly with the set of
instructions further down.
Cansonic UltraDash S1 offers three modes to allow you full use of its
capabilities.
1. Video Mode: When the camera is activated, video mode will set to default.
2. Photo Mode: The UltraDash S1 setting will allow you to take still photographs.
3. Playback Mode: This setting will allow users to view all previously recorded videos
as well as all photos taken.
ADDITIONAL FEATURES:
Automatic Start/Stop Technology:
This feature is included to allow the user to maintain full focus on the road.
The vehicles ignition will let the camera turn on while connected to your
vehicles cigarette lighter socket. Likewise, When the vehicle is turned off, the
camera will automatically shut down as well preserving camera power for
moments you are not connected to a direct line of power.
The Cansonic UltraDash S1 lets users adjust their cameras settings to get the
perfect shot. Here are a few tips from the designers of the camera:
1.Reduce the amount of sky in the picture: By adjusting the camera towards the road,
the automatic exposure compensation will be focused on the road and not the light
from the sky.
2.Position the camera in the center of the dash. If you place the camera behind the
rearview mirror, you will avoid all distractions from the road.
3.Remove any and all objects that will intrude in your shot such as protective lens cover.
Full vision will allow the user to record everything in one shot.
Additional Tips:
Full optimization of memory card:
1.Before removal of the memory card from the UltraDash S1, be sure to turn off the
camera. Leaving the camera on while removing its memory card may lead to eased
memory or corrupt files.
2.Format memory card to UltraDash S1 settings. In doing so, you will be able to fully use
all the memory power your MicroSD card is set to hold.
3.Reformat Memory cards: By reformatting your memory card periodically, you will
continue your memory card to be fully utilized.
1

The Cansonic UltraDash S1......................................................................01
Precautions............................................................................................03
Product Specs.........................................................................................04
Package Contents...................................................................................05
Product Features.....................................................................................05
Suction Mount.........................................................................................06
Camera Parts & Controls..........................................................................07
In-Vehicle Installation..............................................................................13
Video Mode.............................................................................................17
Video Menu.............................................................................................18
Photo Mode.............................................................................................20
Photo Menu.............................................................................................21
Playback Mode........................................................................................22
Set Up Menu...........................................................................................26
USB Storage &PC Camera.......................................................................29
Video & Audio Output...............................................................................30
Troubleshooting......................................................................................31
TABLE OF CONTENT
2

PRECAUTIONS:
Please read the following instructions carefully. Proper Use of the Cansonic
UltraDash S1 is necessary in order to avoid operational problems that may
occur.
CLEANING
Proper maintenance of the UltraDash S1 is essential to allow the full
optimization of the camera. The following suggestions below are to help you.
• Upon opening, remove packaging and ensure the windshield is clear of dirt and debris
before you install on your dash camera mount.
• Avoid any and all distractions in regards to technology, IT’S THE LAW. Any obstruction
of the drivers’ view of the road may result in fines. Please ensure the Cansonic UltraDash
S1 is clear of road view as well as airbags in the event of an accident.
• Please disconnect the Cansonic UltraDash S1 adaptor when vehicle is not in use.
By doing so, you will avoid camera damage as well as hazards such as fires and
electrocution.
• Please avoid viewing the camera playback feature while operating a vehicle. It is illegal
and may result in a fine or worse, death.
• Avoid adjusting the camera settings while driving. It is dangerous and illegal.
OBEY THE LAW !
WARNING:
DO NOT expose UltraDash S1 to moisture under any circumstance. The camera is NOT
WATERPROOF and will become defective as result and may put the user at risk of electric
shock or fire exposure.
CAUTION:
Do not perform any activities or services with the device unless you are qualified to control
the object. Misuse of the Cansonic UltraDash S1 may result in electric shock or fire
exposure. AVOID any circumstances with the
camera that are not listed in the manual. If your UltraDash S1 needs service
repairs, please visit a qualified technician to allow the necessary repairs below:
Cansonic UltraDash S1 has had exposure to water (rain, all forms of water, ETC.)
Cansonic UltraDash S1 operating system is not functioning properly
Cansonic UltraDash S1 does not turn on properly
Liquid Crystal Display (LCD):
Cansonic UltraDash S1 is equipped with and LCD screen to allow users to view
the gallery. The screen has a multi-layer complex component that contains
nearly 600,000 pixels. The pixels the screen projects may fail as a result of:
Defective Problems or Prolonged Exposure to the sun. Product life may also be
a cause for failure. 1 pixel is equivalent to 0.0001% of total screen exposure.
One-pixel failure per year during the operational life of the UltraDash S1
standard and should not be cause for concern.
PROPER USE OF Cansonic UltraDash S1
The following instructions are listed for exclusive use of the UltraDash S1.
Please read the following to prolong camera use and its effectiveness.
• Clean the device with a soft dry cloth. For tough dirt, please use a neutral detergent in
small quantities with water on a soft cloth
• Avoid contact with the UltraDash S1 lens as damage may be caused
• If necessary, clean the lens carefully by using lens cleaning fluid with a soft cloth.
3

PRODUCT SPECS
Power Requirements
Power Supply
Lens -
Type / Angle / Aperture
Recording Resolution
Screen Size
Screen Resolution
Screen Ratio
SD Card
(Recommended Type)
SD Card Recorded File
Capacity
(based on default settings)
Recording Format
Video / Audio Out
Internal Battery
Unit Dimensions
Unit Weight
Model Number / Name UltraDash S1
5V / 1.5A
12-24Vdc Car Power Cable (supplied)
Output: 5Vdc
6G / 140° / F1.8
1920 x 1080 @ 30fps (default)
2.7"
960 (W) X 240 (H) pixels x RGB
16:9
8-32GB SDHC, Class 10 (48mb/s), for best results
use a recognized brand
8GB Micro SD = 60mins of recording
16GB Micro SD = 120mins of recording
32GB Micro SD = 240mins of recording
MOV
2.5mm Jack (Video / Audio)
Lithium-ion 3.7V / 450mAh
(approx. 30mins recording time)
Battery design allows the 'Auto Power Off' feature to
function in event of power loss within the vehicle.
It is not intended as an alternative power source to
replace the supplied car adaptor.
3 x 2 x 1.5 inches ( 7.6 x 5 x 3.8 cm )
0.2 pounds ( 90 g )
4

PACKAGE CONTENTS
Please check the contents of your UltraDash product.
* Product appearance may differ slightly to that shown above.
UltraDash S1 Suction mount Car Power Cable USB Cable
We here at Cansonic would like to thank you for choosing UltraDash S1 as your
choice for camera. We strive to bring you the highest quality products to allow
you to capture memories and content. In the section below, we will show you
the features of your new camera. Enjoy!
-2.7” LCD Color Screen
We developed a screen small enough but without any loss to its resolution. This
design will allow our playback feature to work perfectly for you to decide is you
would like the shot you just captured.
-SUCTION MOUNT
We know how difficult it is to maintain a camera in focus without movement.
We developed a mount that is uniquely designed to maintain the camera as well
as the focus you need to that perfect shot.
-G SENSOR/FILE PROTECTION
When an accident happens, there is no time to save what has just happened.
We have developed a unique feature with how our camera saves and protects
its files. The UltraDash S1’s built in sensor will detect an outside force which
will enable the camera to protect what is has just saved. The file can also be
manually saved. By pressing our easy to access button on the screen you are
able to press protect to the individual file.
-Automatic Start/Stop Tech
Cansonic UltraDash S1 unique feature with its power cord allows the cameras
sensors to react to a power supply. Our cameras car charger is connected to
the vehicles cigarette lighter socket which allows our camera to automatically
turn on and off with the vehicle.
-PARKING MODE
The Cansonic UltraDash S1 has a sleep mode, but we have created a feature
that will automatically record 30 seconds of video is there is any physical
movement of the vehicle.
PRODUCT FEATURES
5

-Built-In Microphone & Speaker
Our Cameras have a built in microphone as well as speaker for you to be able
to use. The feature also works with the cameras playback feature.
Cansonic UltraDash S1 SUCTION MOUNT
We have specific goals when it comes to creating a product anyone can use.
Our Suction Mount lets any and all types of vehicles to carry your camera
around. Below are instructions for you to install the mount to your car with your
new Cansonic UltraDash S1.
1. Suction Release Tab
After you have placed the suction cup upon a clean surface, the locking lever
will be set and the mount will be in place. The suction release tab allows you to
release the cup from the window to readjust your camera.
2. Suction Cup
a standard suction cup to place the mount on the window surface. Remember
to clean the surface of the window and add a small amount of moisture on the
suction cup to allow for a stronger bond between the glass and the suction cup.
Do not place where there is paint.
3. Locking Lever
Our locking lever has been designed to go hand in hand with your vehicles
widescreen. This lets you have a full visual of what’s ahead the road. Look for
the lever and pull down, this will prepare the window mount for its use. Once
you have found the perfect location for the mount, firmly pressed down the
mount and lock the lever to place it securely. Remember to find a suitable
location where it won’t be a distraction for you.
4. Locking Ring
Loosen the locking ring so you are able to adjust the Cansonic UltraDash S1 to
the perfect angle. Remember to tighten the lock before you use it.
1
2
4
3
6

placement. Remember to have a clean surface and place it where it will not be
a distraction to the drivers view.
CAMERA PARTS & CONTROL
Front
1. Camera mounting point
You are able to attach the camera to the provided mount here.
2. Camera Lens
The Cansonic UltraDash S1 camera lens has a standard wide angle view
(140 Degrees) and a 6 element glass lens for the best available picture quality.
3. Speaker
The Cansonic UltraDash S1 is integrated with a speaker for audio when you are
using the cameras playback feature.
2
3
1
2
3
7

4.Screen
The UltraDash S1 is equipped with a standard 2.7 LCD color screen to let you
view your files with its playback feature.
5.Protect File Button
In the event of an accident, we created this feature for convenient use of the
protect file feature the UltraDash S1 offers. Simply press the button and hold
until a beep sound is produced. This will indicate that the file was successfully
protected.
6.Menu Button
The menu button lets you access the UltraDash S1’s menu. Simply press the
menu button once on whatever mode you are in. You can also press the button
twice to open the cameras general settings.
7.Down/Screen Off
Down: This button will allow you to navigate through the cameras menu and
can select the next video during the cameras playback feature.
Screen Off: The button will let you turn the cameras LCD screen on/off. Feature
only in video mode.
8.Record/OK button
Record: This button will be indicated by the standard film recording red dot.
Just press the button down until the LCD screen indicates you are currently
recording. You can use this feature in both Video and Photo Mode.
OK: The button will have the same feature and ‘Enter’ or ‘Confirm’
CAMERA PARTS & CONTROL
Back
8
11 10 9 8 7 6 5
12
4

CAMERA PARTS & CONTROL
Back (Cont.)
9.UP/Microphone OFF button
UP: This button will allow you to navigate through the cameras menu and can
select the next video during the cameras playback feature.
Microphone OFF: By pressing down on this button you will be able to turn on
and off the microphone (All audio recordings). This feature is only available
through Video Mode.
10.Mode/Screen Capture Button
Mode: By pressing this button you will be able to access all modes available on
the UltraDash S1 (Video, Photo, Playback)
Screenshot: While you are recording in video mode, press down on the button
and you will be able to take a screenshot of the current frame.
11.Power ON/OFF Button
When pressing this button down, you will be able to turn the UltraDash on and
off.
12.Multi-Color LED Indicator
Red: Power On
Red (Flashing): Recording
Blue: Battery charging
11 10 9 8 7 6 5
12
4
9

CAMERA PARTS & CONTROL
TOP
13. AV Outlet
This feature is available to let your Cansonic UltraDash S1 connect to your
television directly by using the AV Cable (sold separately)
14. DC-IN/USB Port
By connecting the UltraDash S1 with the supplied power cord you are able to
charge the camera. This will also be utilized to let you connect the USB cord to
your PC.
1413
10

CAMERA PARTS & CONTROL
SIDES
15
16
17
15. RESET Button
If your camera is having problems, the button allows for the camera to undergo
the ‘Default Settings’ reset. Simply press the button until the camera shuts off
and restarts again.
16. MicroSD Card Slot
You can insert the recommended memory card in this location. Align the gold
parts of the memory card correctly facing the back of the UltraDash S1.
17. Microphone
The camera come equipped with an integrated microphone for audio recording.
12

IN VEHICLE INSTALLATION
Thank you for choosing the Cansonic UltraDash S1! Our team wants it to be
known that we take pride in creating a quality camera at an affordable price and
for that we have come up with UltraDash S1. The following instructions below
are for first time installation. You can have day-to-day use of the UltraDash S1,
simply remove it from the mount.
• REMEMBER TO INSERT YOUR MicroSD CARD TO THE Cansonic UltraDash S1
The UltraDash S1 memory slot is fitted to allow a standard MicroSD card to record your
footage. Before installing make sure the gold end of the card is facing the LCD screen.
Once its aligned with the slot, push the card in and wait for the CLICK to make sure it is
secure.
TIP:
-If you cannot hear the CLICK, take a small coin by the edge and push on the outside end
of the card and push until the sound is made.
- Remember: DO NOT REMOVE OR INSERT THE MEMORY CARD WHILE THE
ULTRADASH S1 IS TURNED ON.
• PLACE THE Cansonic UltraDash S1 ON THE SUCTION MOUNT
When you attach the UltraDash S1 onto the mount, make sure you align the
camera within the mount clips so they will hold in place the camera.
13

• ATTACH THE MOUNT TO THE WINDSHIELD & START RECORDING
When you are holding the suction that will hold the mount, you have to remove
the protective plastic film. Once you remove it, select a location to put the
suction cup in place. When you have found a suitable location, remember to
clean the area with a dry/clean cloth to allow a strong bond between the glass
and the suction cup.
-Release the locking lever from the mount by pulling down on it. Hold the
suction cup in place with the mount and press against the window. While it is
being held in place, put the release lever back to lock in the location.
TIP:
-When selecting a suitable location for the suction cup, make sure that it is on smooth glass
without any paint.
-Remember to place the mount within the area of the vehicles windshield wipers.
• CONNECT CAR POWER OUTLET
- Connect the power cable that is in the package that the camera came in.
Use your vehicles cigarette outlet.
14

-Plug the power cable into the camera to allow the camera to charge.
12-24V DC
-The Cansonic UltraDash S1 will automatically start recording once power has
been made available from the in-car power supply. Just start the vehicle and
start driving!
-If there is no cigarette outlet for your vehicle, use the USB power cord supplied
within the camera packaging.
TIP:
-Remember to plug the car power cord to the camera in the power socket located on the top
right corner.
-DO NOT wire the UltraDash S1 directly to the car cigarette outlet. Doing so will result in
permanent damage to the camera.
-The Cansonic UltraDash S1 has a hardwire kit available from your local retailer that will
directly connect to your vehicles fuse box. This will allow you to have your cigarette outlet
available for you to use.
The following instructions below will help you with selecting a suitable location
for you to place your Cansonic UltraDash S1.
15

WARNING:
Please remember to ALWAYS pay attention to the road ahead you. Driving with
distractions on the road may result in penalties, accidents, or even death.
PLEASE DRIVE CAREFULLY.
Always remember to place the mount in a location that will not obstruct your
view of the road. Place the mount in location high and preferably on the side of
the passenger behind the rearview mirror. The UltraDash S1 must view through
the windshield wiping area so it can record the road ahead clearly.
DO NOT place the camera in front or on the driver’s side.
-Place the camera where the power cable is easily concealed and will not
distract the driver. Avoid areas such as the steering wheel, pedals, or gear
shifter.
DO NOT place the mount where airbags deployment area or near any mirrors.
-Remember to clean the area where the mounts suction cup will be placed.
DO NOT operate the UltraDash S1 while driving. Remember the camera will
automatically record when the vehicle engine has started or when you turn your
vehicle off.
PLEASE adjust your camera settings before you begin driving.
The Cansonic UltraDash S1 is, in most cases, legal to use in the US. General
use of the camera for safety purposes is considered beneficial to the camera
operator. There are laws that currently protect and individuals’ rights to privacy.
The law will allow for you to record a video being used by your
Cansonic UltraDash S1 as long as you are not infringing on said individuals’
rights. Remember that the First Amendment protects your recordings but aware
that it may also infringe on an individual’s rights.
In cases where audio is being recorded the law will be slightly different.
We recommend you allow any and all persons near the UltraDash S1 know that
they are being recorded. You can also disable the microphone on the camera,
just follow the instructions.
We recommend you reference to your state local laws.
16

VIDEO MODE
The Cansonic UltraDash S1’s video mode is designed be easy to use. We have
created a key to help you better understand the cameras unique details. The
following information will help you better understand the icons and their
relative functions.
P
1
2 3 4 5 6 7
9101112
08/08/2016
1. Mode: This will indicate when the UltraDash S1 is in video mode.
2. Video Length: This will indicate the length of the recording in progress.
3. Exposure: This will indicate the exposure settings with the display.
4. Parking Mode: This will display the icon after your vehicle is at a complete stop and an
outside force has hit your car, the device will start recording automatically.
5. Microphone: This will display an icon when the UltraDash S1 is recording.
When it is switched to OFF, a red line will appear across it to indicate it is not recording.
6. Recording: The red dot icon will appear on the screen when the camera is actively recording.
7. Recording Duration: This will indicate the length of the current recording.
8. Protected: While the screen is on, the icon will indicate when the G Sensor has been
activated to auto save or by pressing on the file protection button.
9. Time: The screen will display the current time relevant to the time of day.
10. Date: The screen will display the current date.
11. Memory Card: The icon will indicate when a memory card is present in the UltraDash S1.
12. Battery: This icon will indicate when the UltraDash S1 is running on battery of external
power.
The Cansonic UltraDash S1’s default settings have been set for you to allow
you to use the camera without the need to change the settings. They will make
the camera far easier to use.
If the occasion arises that you need to make adjustments to the settings, the
following instructions will help you.
17

VIDEO MENU
Access the video menu by pressing the MENU button while in video mode.
The UltraDash S1 navigations function help select where you would like to
access, by pressing UP or DOWN and the OK button to enter the settings
sub-menu.
Once you access the sub-menu, while using the up and down buttons, highlight
the desired setting and press the OK to confirm your selection and to return to
the VIDEO MENU.
Press the MENU button twice to return to video mode.
TIP:
-You are not able to access the UltraDash S1 menu while the camera is
recording.
• RESOLUTION: When you select the Resolution tab, you will be able to
change the settings to increase and decrease the quality of the video
being recorded.
o OPTIONS: 1080P 30FPS, 720P 30 FPS, 720P 60FPS
DEFAULT SETTINGS: 1080P 30FPS
• EXPOSURE: You are able to adjust exposure levels for the different
varieties of light conditions.
o OPTIONS: +2, +5/3, +4/3, +1, +2/3, +1/3, 0, -1/3, -2/3, -1, -4/3, -5/3 and -2
DEFAULT SETTINGS: 0
• AUDIO RECORDING: You will be able to turn ON and OFF the
microphone when you access the sub-setting.
o OPTIONS: On and Off
DEFAULT SETTINGS: On
• VIDEO LENGTH: You will be able to select the previous recordings by
length. Remember that the oldest file recording will be automatically
deleted in order to make room for the new file recordings.
o REMEMBER: Protected files will never be deleted unless you unlock
it and delete the file.
o OPTIONS: 2 Minute, 3 Minute and 5 Minute recordings
DEFAULT SETTINGS: 3 Minutes
Video Menu
Resolution
Exposure
Audio Recording
Video Length
Back
MENU Enter OK
Video Menu
Resolution
Exposure
Audio Recording
Video Length
18

Video Menu
Resolution
Exposure
Back
MENU Enter OK
Video Menu
Information Stamp
G Sensor
VIDEO MENU (Cont.)
• INFORMATION STAMP: You can turn ON or OFF the cameras model number
as well as the TIME & DATE stamps shown on the recorded files.
o OPTIONS: On and Off
DEFAULT SETTINGS: On
o TIP: Turning off this function will also turn the NUMBER PLATE STAMP
off as well. More information on the NUMBER PLATE STAMP is on
PAGE 26
• G SENSOR: The G Sensor detects any force which will in turn automatically
protect and recording in progress. We recommend the feature not be turned
off. To adjust is, simply access the tab and switch from High to Low.
o OPTION: High, Middle, Low and Off
DEFAULT SETTINGS: Middle
NOTE: When you are in the UltraDash S1’s MENU, you will be able to access
“Restore Defaults” option to let you revert back to the UltraDash S1’s factory
settings.
19