Canyon CNP-BR1 User manual

ENG - 1
4 Port Cable/DSL Broadband Router
Article: CNP-BR1 Quick Guide v1.0
Package Contents
1. CANYON CNP-BR1 Main Unit
2. Power Adapter
3. Documentation CD
4. Quick Guide
5. Warranty Card
Hardware Overview
Getting Started
Connecting to Device
1. Make sure that all network devices are powered off, including the
device itself, PCs, switches, cable or DSL modem, and other
peripherals.
2. Connect the modem to WAN port of the device by one CAT 5
Ethernet cable.
3. Connect PC(s) with the LAN ports (PC1/PC2/PC3/PC4) of the device
by CAT 5 Ethernet cables. One PC connects to only one port using
one cable.
4. Power on the cable or DSL modem.
5. Plug in the power of the device. The Power status indicator at the
front panel of device will light up as soon as the power adapter is
connected properly.
6. Power on PC(s).
Internet

ENG - 2
Internet Configuration Wizard
The default network address of the device is set as 192.168.1.1. Please
configure IP address of host PC at 192.168.1.XXX where XXX is a number
between 002 and 254. The subnet mask should be 255.255.255.0. Please
follow below steps to enter web browser management mode.
1. Open a browser (Internet Explorer browser only) and type in
“192.168.1.1” at the address bar and press Enter.
2. Type “guest” at the user name text box and “guest” again at the
password text box.
3. The home page of web browser management mode will be
displayed.
4. Click on 8 different functions on the main router menu on the left.
The corresponding information will be displayed at right.
5. Click on Help at any time to bring up help menu.
1. Start Internet Configuration Wizard
zInternet Configuration Wizard will pop up upon successful login.
NOTE:
Enable active X control option if necessary or click on Wizard to start.
zSelect pop up to enable automatic Internet Configuration Wizard
prompt window. Click on Save to save this setting.
zClick on Start to continue.
zClick on Exit to exit.

ENG - 3
2. Select Connection Type
zSelect 1 of 4 connection types instructed by ISP or network admin.
zClick on Next to continue or Prev to go back to previous page.
zClick on Exit to exit.
2.1 DHCP Connection
zType in Host Name and Domain Name provided from ISP or
network administrator.
zCheck on Clone Physical Address or enter physical address
manually if required by ISP.
zClick on Next to continue or Prev to go back to previous page.
zClick on Exit to exit.

ENG - 4
2.2 PPPoE Connection
zType in PPPoE Account and PPPoE Password provided from ISP.
zClick on Next to continue or Prev to go back to previous page.
zClick on Exit to exit.
2.3 Static IP Connection
zType in IP Address, Subnet Mask, Gateway, Primary DNS, and
Secondary DNS provided from ISP.
zClick on Next to continue or Prev to go back to previous page.
zClick on Exit to exit.

ENG - 5
2.4 PPTP Connection
zType in User Name, Password, and Server IP Address provided
from ISP.
zSelect IP assignment method as instructed by ISP.
zClick on Next to continue or Prev to go back to previous page.
zClick on Exit to exit.
3. Installation Completed
zClick on Exit to finish Internet Configuration Wizard.
Please refer to full manual on CD for more detailed
operation information.