Capetti Elettronica Winecap BOX-PPS User manual

BOX-PPS
User Manual
WA5087E_BOX PPSM1_User Manual_R01
V4.6
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone [phone] - Fax [phone]
e-mail [email protected] - web www.capetti.it
1/4
1. Description.
The BOX PPSM1 power supply kit is made by a 10 W polycrystalline photovoltaic panel with a mounting bracket, fixed to a plastic
case in which the MWDG-GSM basestion is housed. The case contains also GSM/GPRS and WSN antennas, the battery charger, a
12V 9Ah sealed lead acid battery and a 2.6A switching power supply to assure a dual power supply.
The kit is designed to supply enough power to guarantee a daily data sending to the Service Center www.winecap.it using the GSM
connection in normal climatic conditions, also during winter.
Picture 1 - Product Image

BOX-PPS
User Manual
WA5087E_BOX PPSM1_User Manual_R01
V4.6
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone [phone] - Fax [phone]
e-mail [email protected] - web www.capetti.it
2/4
2. How to install.
For best results, also during winter, the solar panel must be installed facing SOUTH and the box must be placed vertically to hold
the solar panel inclination to 60°.
Picture 2 - Installation layout

BOX-PPS
User Manual
WA5087E_BOX PPSM1_User Manual_R01
V4.6
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone [phone] - Fax [phone]
e-mail [email protected] - web www.capetti.it
3/4
3. Technical Information.
Box material
ABS
Bracket material
Opaque polycarbonate
Box dimensions
382x282x131mm
Bracket dimensions
384x545x5mm
Collar pitch
minimum: 52mm - maximum: 60mm
6A-12/24V charge controller - Nominal working voltage
12/24V
6A-12/24V charge controller - Maximum current
6.6A
6A-12/24V charge controller - Sealing
IP22
6A-12/24V charge controller - Dimensions
85x98x34mm
6A-12/24V charge controller - Weight
108g
6A-12/24V charge controller - Ambient temperature
from –25 to +50°C
6A-12/24V charge controller - Self-consumption
6mA
Battery - Type
Lead-calcium
Battery - Features
9Ah-12V
Battery - Case material
ABS
Photovoltaic panel - Nominal power
10W
Photovoltaic panel - Vmp
17.9V
Photovoltaic panel - Imp
0.56A
Photovoltaic panel - Voc
22.41V
Photovoltaic panel - Isc
0.61A
Photovoltaic panel - Dimensions
33.7x20.5x1.5cm
Photovoltaic panel - Weight
0.80Kg
Switching power supply - Outputs
1
Switching power supply - Output voltage
13.8V
Switching power supply - Output current
2.6A
Switching power supply - Output type
•Fixed
•Adjustable
Switching power supply - Nominal power
35.9W
Switching power supply - Input voltage
•85V (minimum)
•100÷240VAC (nominal)
•264V (maximum)
Switching power supply - Isolation voltage
3kV
Switching power supply - Case
Metallic
Switching power supply - Terminal type
Clamp in a row
Switching power supply - Efficiency
83%
Switching power supply - Medium time between two
faults (MTBF)
523,300h
Switching power supply - Ripple and noise (V)
120mV
Switching power supply - Operating temperature
•-20°C (minimum)
•+60°C (maximum)
Switching power supply - Dimensions
99x97x36mm

BOX-PPS
User Manual
WA5087E_BOX PPSM1_User Manual_R01
V4.6
CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone [phone] - Fax [phone]
e-mail [email protected] - web www.capetti.it
4/4
4. Reference standards.
EN 61010 -1
For electromagnetic compatibility
EN 61000 - 3 - 2
EN 61000 - 3 - 3
EN 300 220 -2
EN 301 489 - 03
EN 61000 - 6 -1
This symbol indicates that this product is compliant with the European Directive 2011/65/CE that restricts
the use of substances in the manufacturing of electronic devices.
The “WEEE” logo on the label indicates that this product is compliant with the "WEEE" EC Directive.This
symbol (valid only in the European Union countries) indicates that the product it is applied to, MUST NOT
be discarded with ordinary household or industrial waste, but must be sent to an authorized reception
point. The end user should contact the device provider, either the manufacturer or the reseller, in order
to agree a collection and disposal process, after having checked the terms and conditions of sale.
The features shown may be subject to change without notice.
IT190200000111
61