CARE chillaxbaby Daily Baby DM640 User manual

USER’S GUIDE
4.3" Wi-Fi®Video Baby Monitor
MODELS: Daily Baby
DM640, DM640-2, DM640-3, DM640-4

Welcome...
to your new Chillax Wi-Fi®Video Baby
Monitor !
Thank you for purchasing the Wi-Fi® Video Baby Monitor. Now you can see
and hear your baby sleeping. Our Connected Baby Monitor let you see
your baby from the hand-held viewer, or from your smartphone. Watch
over and communicate with your baby from anywhere in the world.
Please keep your original dated sales receipt for your records. For warranty
service of your Chillax product, you will need to provide a copy of your
for warranty coverage.
contact us by:
Email: [email protected]
Or, visit us at http://chillaxcare.com
This User’s Guide has all the information you need to make the most out of
your product. Please read the Safety Instructions on pages 8-9 before you
install the unit.
Inside the Box
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 2 x Power Adapters (Parent Unit and Baby Unit)
• 1 x User Guide
with power adapters.

Overview of Parent Unit
1
2
4101112
5
6
7
8
9
3
13
1. Display (LCD screen)
2. Parent Unit ON/OFF
Short press to switch on when unit
is off.
Long press to switch off when unit
is on.
Short press to turn LCD screen Off
when unit is on.
3. Audio Level LEDs (Green, Green,
Amber, Red, Red)
4. MENU button
Press to open / close the Menu
options.
5. Zoom button
Toggle to zoom in/out the image
in 1x and 2x ratios.
6. OK button
7. Navigation buttons
options.
8. Brightness button
Press to adjust the LCD brightness
level (up to 8 levels).
9. 2-Way Talk button
Press and hold to speak to your
baby.
10. Volume +/-
Adjust the speaker volume level
by pressing + or - buttons.
11. Diapering log button
Press and hold to record one
diaper change event.
12. Feeding log button
Press and hold to record one
feeding event.
13. Power Socket

Parent unit menu icons
Signal Level (5 Levels).
Night Vision Mode (Video also changes to Black/White).
Talk Mode On.
Indicates the screen off timer is set.
Set Screen Off Timer (Off, 5 mins, 30 mins, 60 mins).
Volume Level Control (8 Levels).
No Baby Unit detected.
Battery Level Indication (4 Levels).
Zoom Level Control (1X, 2X).
LCD Brightness Level Control (8 Levels).
Alarm Setting (6h, 4h, 2h, OFF)
On status bar, indicates alarm set, and when flashing, that
alarm time has been reached or missed.
Temperature scales select (°C/°F)
<14 °C / 57 °F.
Displays LL °C / °F if < 1 °C / 34 °F.
Camera Control (scan , view , add , del ).

Overview of Baby Unit
Important guidelines for installing your Digital Video Baby Monitor
• To use your Baby Unit and Parent Unit together, you must be able to
establish a radio link between them, and the range will be affected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a
metallic door or reinforced concrete, between the Baby Unit and Parent
Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
• Other 2.4GHz products, such as wireless networks (Wi-Fi®routers),
Bluetooth™ systems, microwave ovens or other Baby Monitors, may cause
interference with this product, so keep the Baby Monitor at least 5ft (1.5m)
away from these types of products, or switch them off if they appear to be
causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to different
positions in the rooms.
1
3
2
4
5
7
6
8
9
10
1. Speaker
2. PAIR button
annetnA.3
4. Power socket
5. Light Sensor
6. Camera Lens
7. Power/Link LED indicator
8. Micro-SD Card Slot
Support micro-SD card up to
32MB memory.
9. Microphone
10. Privacy Protection knob
Slide to enable/disable the
privacy protection mode On/Off.

6
Table of contents
1. Safety Instructions .......................................................................................... 8
2. Getting Started ............................................................................................ 10
2.1 Connecting the Power Supply for the Baby Unit ........................... 10
2.2 Connecting the Power Supply of the Parent Unit.......................... 11
2.3 Desktop Stand of the Parent Unit..................................................... 12
.......................................................................... 12
3. Using the Baby Monitor ............................................................................... 13
3.1 SD card installation ............................................................................ 13
3.2 Setting Up............................................................................................ 13
3.3 Night Vision Mode.............................................................................. 13
3.4 Privacy Protection.............................................................................. 13
3.5 2-Way Talk Mode ............................................................................... 14
3.6 Video ON/OFF .................................................................................... 14
3.7 Volume control................................................................................... 14
3.8 Feeding event log.............................................................................. 14
3.9 Diapering event log................................................................. ....... .. 14
3.10 Temperature Display (HH °C / °F or LL °C / °F)................................ 14
4. Parent Unit Menu Options........................................................................... 15
4.1 Alarm ................................................................................................... 15
4.2 Camera Control................................................................................. 15
4.2.1 Add (pair) a camera............................................................ 15
4.2.2 View a camera..................................................................... 16
4.2.3 Delete a camera.................................................................. 16
4.2.4 Scan camera ........................................................................ 16
4.3 Temperature Unit................................................................................ 17
4.4 Video on Timer ...................................................................................17
4.5 View multiple cameras on screen ................................................... 17
Table of contents

7
ENGLISH
Table of contents
5. Wi-Fi®Internet Viewing ................................................................................ 18
........................................................ 18
5.2 Getting Started - Connecting Devices............................................ 18
5.3 Setup ................................................................................................... 19
5.4 User Account and Camera Setup on Android™ Devices or
iPhone®/iPad®..................................................................................... 19
5.4.1 Power ON and Connect the Camera ............................... 19
5.4.2 Download ChillaxCare App................................................ 19
5.4.3 Sign up with ChillaxCare on your smart device................ 20
5.4.4 Add the Camera to your account..................................... 21
6. Disposal of the Device (environment)....................................................... 23
7. Cleaning ....................................................................................................... 23
8. Help ............................................................................................................... 24
9. Troubleshooting for Wi-Fi®Internet Viewing .............................................. 26
10. Standard Warranty ...................................................................................... 31
............................................................................. 35

8Safety Instructions
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED in cords. Keep this cord out of
the reach of children (more than 3ft (1m)
away). Never use extension cords with AC
Adapters. Only use the Adapter provided.

9
Safety Instructions
ENGLISH
Wi-Fi®CAMERA UNIT SET UP & USE:
• Choose a location for the Baby Unit that will provide the best
view of your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser,
bureau or shelf, or mount the Baby Unit on a wall securely
using the keyhole slots in the underside of the stand.
WARNING
This Baby Monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User’s
Guide, safe to use. Therefore, always read the instructions in this User’s
Guide carefully before using the device.
•
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
•
•
• Do not cover the Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior
to actual use.
• Do not use the Baby Monitor in damp areas or close to water.
• Do not install the Baby Monitor in extreme cold or heat, direct sunlight,
or close to a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and
battery pack.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical sockets.

10 Getting Started
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
Use only the rechargeable battery pack with rating: 3.8V 1200mAh.
2. Getting Started
2.1 Connecting the Power Supply for the Baby Unit
• Connecting the Power Supply for the Baby Unit.
• Insert the DC plug of the power adapter into the DC socket on the
back of the Baby Unit.
• Connect the other end of the power adapter to electrical outlet.
• The baby unit turns on and the power indicator lights in blue color.
NOTE
Only use the supplied power adapter (DC5V/1000mA).

11
Getting Started
ENGLISH
2.2 Connecting the Power Supply of the Parent Unit
A rechargeable battery (Lithium-ion battery 1200mAh) inside the Parent
Unit allows you to move it without losing the link and picture from the Baby
Unit. The battery provides up to 6 hours operation of the Parent Unit. We
Parent Unit indicates the battery is low.
• Connect the small plug of the power adapter to the parent unit and
the other end to the electrical outlet. Only use the enclosed adapter
(5VDC/1000mA).
• Press the
button to turn the Parent unit on, the Parent unit and Baby
unit are automatically linked and ready to use.
NOTE
When the Baby and Parent Units are both turned on and within range,
the Parent Unit should show a color image from the Baby Unit camera,
but if the room is dark, the image will be in black and white, with an icon
showing, due to the infra-red illumination by the Baby Unit.

12 Getting Started
2.3 Desktop Stand of the Parent Unit
• The parent unit comes with a desktop stand attached to the back of
the parent unit.
• To place the parent unit on a desk, simply pull out the stand, as shown.
NOTE
2.4 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
• Press the button and the menu bar will pop up.
• Press the is highlighted, and the scan
, view , add , del menus will pop up.
•
• Camera
• Press the UP / DOWN button to select the desired Camera and press
the OK button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
Press the UP / DOWN buttons to select add and press the OK
button to confirm.

13
Using the Baby Monitor
ENGLISH
• Press and hold the PAIR button on the underside of the Baby Unit until
PAIR OK appears on the
screen. The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
3. Using the Baby Monitor
3.1 SD card installation
As an option, the Unit provides video recording on up to 32GB microSD
card into the SD slot as shown.
3.2 Setting Up
Place the Baby Unit in a convenient location (e.g., on a table) and point
the camera lens towards the area you want to monitor.
image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby’s reach! If there is interference
with the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.3 Night Vision Mode
in the dark. When the built-in photo sensor on the top of the Unit detects
screen on the Parent Unit will display in black and white. The icon will be
displayed at the top of the screen.
3.4 Privacy Protection
To enable privacy protection mode, slide the knob to position such that
the device will be disconnected from the Wi-Fi®network.
To disable the privacy protection mode, slide the knob to the position
to restore the Wi-Fi®network connection.
Note: The privacy protection setting is disabled by default.

14 Using the Baby Monitor
3.5 2-Way Talk Mode
Press and hold the 2-Way Talk button on the Parent Unit to talk to your
baby through the Baby Unit’s loudspeaker.
The icon will be displayed at the top of the LCD screen.
3.6 Video ON/OFF
Press button once to turn the LCD screen on or off at standby mode,
whilst still leaving the audio monitor on.
3.7 Volume control
Press the Volume buttons + or - to adjust the parent unit volume level. The
icon will pop up and you can select the desired volume from level 0~8.
(The default volume level setting is level 5, and level 0 is OFF.)
3.8 Feeding event log
Press and hold on the button to log one feeding event before you are
free to edit the detail. You then enter the mobile app – Chillax Care to
input the feeding detail, such as fed by breast feeding, bottle feeding or
3.9 Diapering event log
Press and hold on the button to log one diaper change event before
you are free to edit the detail. You then enter the mobile app – Chillax
Care to input the diaper change detail, such as change due to pee, poo
or mixed, then follow the App instruction to detail the information.
3.10 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the
Baby Unit will be displayed at the top of the LCD screen. The readings will
The reading will change to HH °C / °F if the temperature goes above 36°C /
97°F. The reading will change to LL °C / °F if the temperature goes below 1°C
/ 34°F.

15
Parent Unit Menu Options
ENGLISH
4. Parent Unit Menu Options
4.1 Alarm
• Press the button and the menu bar will pop up.
• Press the is highlighted.
•
(The default setting is Alarm OFF.)
• If an alarm time is selected, the Parent Unit will beep for about 45
seconds after every 6-, 4- or 2-hour period.
4.2 Camera Control
4.2.1 Add (pair) a camera
• Press the button and the menu bar will pop up.
• Press the is highlighted, and the scan
, view , add , del menus will pop up.
•
• Camera will pop up. Press the UP / DOWN
buttons to select the open camera number (without *
marked) and press the OK button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
• Press and hold the PAIR button on the underside of the Baby Unit until
PAIR OK appears on the
screen. The video from the new added camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
Press the UP / DOWN buttons to select the alarm time(6h,4h, 2h).
Press the UP / DOWN buttons to select and press the OK
button to confirm.

16 Parent Unit Menu Options
4.2.2 View a camera
• Press the button and the menu bar will pop up.
• Press the is highlighted, and the scan
, view , add , del menus will pop up.
•
• Camera will pop up. Press
buttons to select the desired Camera and press the OK button to
view the picture from that camera.
NOTE
Only camera locations with a * can be selected.
TIP
You can also press the OK button repeatedly to view feed from available
cameras.
4.2.3 Delete a camera
• Press the button and the menu bar will pop up.
• Press the is highlighted, and the scan
, view , add , del menus will pop up.
• Press the UP / DOWN buttons to select , and press the OK
button to confirm.
• Camera will pop up, press the UP / DOWN
buttons to select the desired Camera and press the OK button.
• Press the UP / DOWN buttons to select , then press the
NOTE
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.2.4 Scan camera
This function is only available when you have more than 1 Baby Unit
(Camera).
• Press the button and the menu bar will pop up.
button to confirm.
Press the UP / DOWN buttons to select view and press the OK
the UP / DOWN
OK button to confirm the camera deletion,.

17
Parent Unit Menu Options
ENGLISH
• Press the is highlighted, and the scan
, view , add , del menus will pop up.
• Press the UP / DOWN buttons to select and press
• The screen will then display images from different registered cameras
TIP
You can also press the OK button repeatedly to select available camera
video feed or enter scan mode.
4.3 Temperature Unit
• Press the button and the menu bar will pop up.
• Press the is highlighted.
• Press OK , the UP / DOWN buttons to select
4.4 Video on Timer
• Press the button and the menu bar will pop up.
• Press the is highlighted.
• Press the UP / DOWN buttons to select auto video off after
5 mins, 30 mins or 60 mins (if operating on batteries only).
NOTE
The audio will remain, and you can press any key to switch the video back
on.
the OK button to confirm.

18 Wi-Fi® Internet Viewing
5. Wi-Fi®Internet Viewing
5.1 Minimum System Requirements
Web Portal
- Android™ System, Version 7.0 or above
- iPhone®/iPad®iOS, Version 10.0 or above
- High Speed (Wi-Fi®) Internet
At least 0.6 Mbps upload bandwidth per camera (you can test your
internet speed here: http://www.speedtest.net)
5.2 Getting Started - Connecting Devices
How does it work?
Access your
Camera locally
Wi-Fi RouterWi-Fi
Camera
5 Gen Care
Service
View your Camera
from any compatible
device remotely
When a user tries to access the Camera, our 5GenCare server
authenticates the user’s identity and permits access to the Camera.

19
Wi-Fi® Internet Viewing
ENGLISH
5.3 Setup
Connect the Wi-Fi®Camera to the Power Adapter, then plug into mains
power. The Camera must be within range of the Wi-Fi®router with which
you want to connect. Make sure the password of the router is available for
entering during the in-app setup process.
Status of LED Indication:
Note: You can only setup via a compatible smartphone or tablet and not
via a PC.
5.4 User Account and Camera Setup on Android™
Devices or iPhone®/iPad®
What you need
• Wi-Fi®Camera Unit
• Power adapter for the Camera
• Device with Android™ system version 7.0 and above
• Or iPhone®/iPad®with iOS version 10.0 and above
5.4.1 Power ON and Connect the Camera
• Switch the parent unit off before connect the camera to Wi-Fi®.
• Connect the power adapter to mains power and insert the plug into
the power socket on the back of the Camera Unit, the unit turns on.
5.4.2 Download ChillaxCare App
•
device and download ChillaxCare
App from the App Store for iOS devices
or from the Google Play™ Store for
Android™ devices.
• Install ChillaxCare App on your device.

20 Wi-Fi® Internet Viewing
5.4.3 Sign up with ChillaxCare on your smart device
• ®router.
•
•
fig. 1 fig. 2
NOTE
If you already have a ChillaxCare App account, please tap Log in to go to
the next steps.
This manual suits for next models
3
Table of contents