CareRay CareView 1500C User manual

CareView® 1500C
Quick Installation Guide
1 2
34
56
Insert 1500C into the bucky. Connect the interface cable, keep
two red dot inline.
Plug the interface cable into the power
box.
Plug the power cord into the socket.
Plug the power cable to socket.
Plug the network cable into power box.
Interface Cable Power Cable Network Cable

Please Note That:
The LED indicator should be shining if the
detector is properly powered on.
When disconnecting the cable, grasp the
metal part and pull, do not pull at the rubber
part.
When Installation Completed:
78
Connect the network cable and PC.
Swith on the power box and PC.
Accessories:
• Power Box Cable
• Power Box
• Interface Cable
• Network Cable
Above content is subject to change without prior notice.All rights reserved. Copyright@Careray Inc 2016.
CareRay Digital Medical System Co.,Ltd.
#3-3001 Winchester Blvd.
Campbell, California USA 95008.
Tel: [phone]