Carolina Sim Works M1 User manual

Tools Needed: M8 Allen Wrench, 13MM Adjustable Wrench.
1. Unwrap all components from the seat slide box.
2. Attach Sliders to Seat Rails
Parts: (2) Seat sliders, handle
Insert (2) T-Nuts in 15/15 Seat Rails. Use (2)
M8x12 to attach seat
slider. You may have
to slide up and back
to expose the holes to
insert the SHCS.
Repeat on other side.
Attach the handle to
the interior of the
seat sliders. Handle
should point slightly up to make it easy to grab
from the seated position. You may need to bend
the handle to the width of your seat to assure a snug fit.
3. Attach Seat Mounts to Sliders Uprights
Parts: Left Seat Mount Right Seat Mount
Place Seat mount on top of seat slider with slotted holes toward the front. Use (2)
8Mx16 SHCS (inserted up from the slider) and (2) M8 Nuts on Top to attach the seat
Mount.
Repeat on other side.

4. Attach your seat to the seat mounts.
Parts: (1) racing seat.
Use (4) M8x25 and (4) washers to attach racing seat to
seat mounts.
5. Attach all your components, wire it up, configure
to your specifications and Enjoy your M1 Sim Rig!
Questions??? [email protected]
ENJOY!